1 2 3 4
TOP FRAME
1PC
A B C D E
BOLT 1/4”x1-1/4”
4PCS
END TABLE
ASSEMBLY INSTRUCTIONS
BOLT 1/4”x5/8”
6PCS
SIDE PANEL
2PCS
FLAT WASHER
4PCS
STRETCHER
1PC
LEVELER
4PCS
MIRRORED TOP
1PC
ALLEN KEY
1PC
***
***
Do not tighten screws & bolts until the
*** ***
STEP 1
entire unit is completely assembled. ***
Attach side panel (2) to top
frame (1) using bolts (A) and
flat washer (C) as shown.
STEP 2
STEP 3
Attach stretcher (3) to side
panel (2) using bolts (B) with
wrench (E). Then, attach
leveler (D) to the bottom of
side panel (2) as shown.
Attach the assembled parts to
mirrored top (4) using bolts (B)
again. Tighten all bolts and
carefully turn the assembled
unit upright.
Your mirrored end table
assembly is now complete.
*Notice: Please adjust each
leveler to make sure the table
sits firmly on the ground.
Loading...