NO. Picture QTY
A 1
B 2
C 1
Assembly instructions
Caution : You must read this before you proceed
TABLE
CAUTION: This table is NOT a TOY.
Keep your child / children at bay in the process of assembly.
Parts list
Leg Support
Description
Table Top
Leg with pre-attached Levellers
1 OF 5
①19②19③
1
Washer(8mm)
Assembly Preparation
Before Beginning Assembly:
Hardware
Bolt(M8*16)
Allen Wrench(8mm)
Assembly Step
This Table has multiple parts and may require up to some 30 minutes to
assemble.
To give you an overview of the Table parts, the above picture is to help you
put the various parts into perspective.
Please read through the instructions below to familiarise yourself with the
parts and steps before assembly.
Overview
Table Top(A)
FRONT FACING
Leg with pre-
attached Leveller(B)
Leg Support (C)
2 OF 5
Unpack and place all parts onto a clean soft surface.
Attach Leg with pre-attached Levellers(B) and Leg Support(C) with Bolts(①)
and Washers(②) by Allen Wrench(③).
DO NOT OVERTIGHTEN.
③
②
①
C
B
3 OF 5
Turn the table top upside down to a soft surface to avoid scratching.
Attach Table Leg with Pre-attached Levellers(B) to the mounting position on
the table top(A) with Bolts(①), Washers(②) by Allen Wrench(③).
DO NOT OVERTIGHTEN.
Turn the Table rightside up.
Adjust the pre-installed Leveller until the Table is level with the ground.
Then, proceed to tighten all Bolts and Nuts.
Your table is ready for use.
Caution: This Table can only be used on a flat, level surface.
Adjust height
for balance
Adjust low
for balance
4 OF 5
5 OF 5
Loading...