Lark Manor™ OCJB1069 Assembly Instructions

Page 1
ASSEMBLY I
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Separate, identify, and count all parts and metal hardware. Compare with parts list to be sure all parts are present. If any part(s) are missing or damaged, phone, fax, or mail to our Customer Service Department. For efficient and speedy service, please indicate the model number and code letter of part(s) needed.
PARTS
(A) ARMOIRE (B) TOP (C) DECORATIONS (4) (D) DOWELS (8)
ATTENTION: SOME NUMBERED PARTS LISTED ON THE INSTRUCTION SHEET MAY NOT BE IN PARTS BAG AS THEY MAY ALREADY BE ASSEMBLED. CAREFULLY CHECK PARTS AND PACKING MATERIALS PRIOR TO ORDERING REPLACEMENTS.
(E) WOOD SCREWS (5) (F) FOAM PADS (2) (G) SMALL DRAWERS (4) (H) LARGE DRAWERS (4)
NSTRUCTIONS
HARDWARE ILLUSTRATION
D E F
Tools required: Screwdriver (not included)
IMPORTANT NOTE: Follow instructions listed below in the proper sequence as numbered
to assure fast, easy and correct assembly.
1. Note: Upon opening, thoroughly clean all wood surfaces with furniture polish to remove dust and dirt that may have settled onto finish during shipment.
2. Insert Dowels (D) into holes in corners of Armoire (A). Push Decorations (C) onto Dowels (D). (See ill. #1)
3. Tighten Wood Screws (E) through hinge attached to back of Armoire (A) into back of Top (B). Remove paper backing from Foam Pads (F) and place onto top corners of Armoire (A). (See ill. #2, #3)
4. Your furniture has been handcrafted and skillfully finished by fine craftsmen. Rich, deep antique finishes have been applied which require very little polish. However, should you desire a shinier finish, simply use any good grade of furniture polish, rubbing the finish lightly as it is being applied. Allow to dry and buff lightly with a soft cloth.
#1
#3
F
A
#2
If you have a problem, we want to have the opportunity to make it right!
Should there be any missing or defective part(s),
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
(Many problems can be resolved without returning this product to the retailer)
Name
Address
Part Letter
Part Letter
DescriptionPart Letter
Description
Quantity Quantity
Quantity
Daytime Phone
Reason for Replacement
Place of Purchase
Made in China
( )
Loading...