Page 1
SLAT BACK BARSTOOL WITH
UPHOLSTERED SEAT
NO Parts List Q'TY
A
B
C
D
E
F
G
H
Do not use power tool for assembly.
All bolt must fasten either by wrench or Allen Key.
Chair Back
Seat Frame
Upholstered seat
Left Front Leg
Right Front Leg
Left Side Stretcher
Right Side Stretcher
Front Stretcher 1
Important Note
1
1
1
1
1
1
1
NO Hardware List Q'TY
1
2
3
4
5
6
7
8
STEP 2
8 x 1" Pan Head Screw
8 x 1.1/4" Pan Head Screw
M6x 40mm JCBC Bolt
M6x70mm JCBC Bolt
M6x13mm Lock Washer
M6.5x16.5mm Flat Washer
M4 x 2.1/2" Allen Key
Assembly Glue
Do not fully tighten the bolt
6
6
2
6
8
8
1
1
STEP 1
STEP 3
Do not fully tighten the bolt
4
7
5
6
7
3
5
6
B
1
D
6
5
4
7
H
E
8
A
STEP 4
F
G
2
Levelling solution: Loosen each bolt in the seat box (front legs, back
corner blocks and back apron) to the point where it can be turned
Chair/Stool back and seat frame are well connected. Sit in the
Chair/Stool,but do not lean against the Chair/Stool back. Gently sway
back and forth, left and right. Carefully turn the Chair/Stool upside
down, and tighten each bolt. The Chair/Stool will now be levelled.
C
Loading...