Page 1
1
2 3 4
METAL FRAME
1PC
LEGS
3PCS
TRAY
1PC
USB DEVICE
1PC A B C D
BOLT 3/16” X 3/8”
6PCS
BOLT 3/16” X 3/4”
3PCS
SCREW M8 X 7/8”
4PCS
SCREW
2PCS
STEP 1
*Please put all parts on a
soft surface to prevent
scratches.
Attach one of legs (2) to
metal frame (1) by using
bolts (A) as shown.
ASSEMBLY INSTRUCTIONS
* Do not tighten screws & bolts until the entire unit is completely assembled. ***
Page 2
STEP 2
Repeat same step as
step one that attach
another leg (2) to metal
frame (1) by using bolts
(A) and use bolt (B) to fix
the two legs together as
shown.
STEP 3
Repeat the step as step 2
that attach last leg (2) to
metal frame (1) by using
bolts (A) and use bolts (B)
to fix all legs together as
shown.
Page 3
STEP 4
Attach the assembled unit
to tray (3) by using
screws (C) as shown.
Tighten all bolts and
carefully turn the
assembled unit upright.
STEP 5
Attach USB device (4) to
tray (3) by using screws (D)
as shown.
Your charging station is
now complete.
Loading...