BEFORE ASSEMBLY
Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for
durability, Please take the time to read and follow the assembly instructions carefully,
Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment.
Please separate, identify, and count all parts and metal hardware, Compare with part list to be sure all parts are present,
If hardware is missing or you have difficulty assembling this product, please call for us,
IMPORTANT NOTE:
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being
scratched,
Remove all wrapping material, including staples & packing straps before you start to assemble.
DO NOT tighten all screws and bolts until completely assembled.
Keep all hardware parts out of reach of children,
PART LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you
have the following parts:
NO Description Qty
Chair back 1
A
Sketch
NO
B
Description Qty Sketch
Seat Frame 1
, If '
: : :
W\
C
Front Leg
2
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you
have all of the following hardware:
NO
i
3
5
Descrip tion
Long bolt
(M6x80mm)
Short bolt
(M6x40mm)
Flat Washer
(<56.5x19)
Qty
Ske t c h
4
2
10
ttmmm
@mmmm
§
NO
2
4
6
Descrip tion
Medium bolt
(M6x60mm)
Lock Washer
(<56.5x9)
Allen Key
(4mm)
Qty
Ske t c h
4
10
1
@
STEP 1
Attach frame (B) to the back (A) by using bolts (3) and (1) and washers (4) and (5). Tighten with Allen
Key (6).
Note: DO NOT tighten any of the bolts, until the chair is assembled, then put on a flat level surface to
make sure the chair is level and then tighten the bolts.
STEP 2
Attach front legs (C) to the seat frame. Use bolts (2), washers (4) and (5) .Tighten with Allen Key (6).
Loading...