Page 1
ASSEMBLING & INSTALLATION INSTRUCTIONS
j
The drawing shown may not exactly match the product enclosed.
However, the installation instructions do apply to this product.
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
ATTENTION! COUPER LE COURANT AU FUSIBLE OU UN DISJ ON CTEUR.
ASSEMBLING THE FIXTURE (Fig.1)
1. Shut off the power at the circuit breaker and remove old fixture,
including the single bar.
2. Thread the pipe thread part way into the center hole of the single
bar and secure with hex nut.
3. Attach the single bar to the junction box using two box screws. The
side of the single bar marked “GND” must face out. The junction
box is not included.
4. Follow wiring instructions carefully (see fig.2)
5. Attach the glass shade(D)/plastic shim(G) and back plate(A) to the
top pipe thread of the frame(E), then tighten it with the hex nut(C)
until snug.
6. Attach the lamp body onto the junction box, aligning the mounting
hole with the pipe thread, then tighten it with the ball nut (B).
7. Install the light bulb(not included) in accordance with the fixture’s
specifications. NOTE: DO NOT EXCEED THE MAXIMUM
WATTAGE RATING!
CONNECTING THE WIRES (Fig.2)
1. Connect the electrical wires as follows. Connect the Black wire
from the fixture to the black house (hot) Wire. Connect the
white wire from the fixture to the white (neutral) house wire.
Make sure all wire nuts are secured. You may wrap the
connections with electrical tape. If your outlet box has a ground
wire (green or bare copper) connect fixture’s ground wire to it.
Otherwise attach the bare copper fixture wire to the green
ground screw on the mounting plate.
2.Tuck the wire connections neatly into the wall junction box.
Your installation is now complete Return power to the junction
box and test the fixture.
Your installation is now complete. Return power to the
unction box and test the fixture.
FIG.1
FIG.2
FIXTURE
WIRES
Black or
Smooth
HOUSE
WIRES
Black(Hot)
FIXTURE
WIRES
White or
Ribbed
HOUSE
WIRES
White
(Neutral)
FIXTURE
WIRES
Bare
Copper
(Ground)
HOUSE
WIRES
Green or Bare
Copper(Ground)
Loading...