Page 1
EASTERN KING SIZE BED
ASSEMBLY INSTRUCTIONS
PAGE 1 OF 4
Page 2
ASSEMBLY INSTRUCTIONS
*FROM BOX 1
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instruction in the same sequence as numbered to assure fast & easy assembly.
Warning!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
2. This product is for home use only and not intended for commercial establishment.
PARTS IDENTIFICATION
B1 (BOX 1)
A HEADBOARD PANEL
B RIGHT HEADBOARD LEG
C LEFT HEADBOARD LEG
D
E
FOOTBOARD
BED SLAT
1PC
1PC
1PC
1PC
4PCS
F
B2 (BOX 2)
G
HB
D
BED SLAT SUPPORT 8PCS
WITH LEVELER
BED RAIL 2PCS
*FROM BOX 1
HEADBOARD
COMPLETE
1PC
1PC
FOOTBOARD
HARDWARE IDENTIFICATION
Z - B1 (BOX 1)
1 BOLT 6PCS
4
2 LOCK WASHER 6PCS 5 SCREW 8PCS
3 FLAT WASHER 6PCS
PAGE 2 OF 4
ALLEN WRENCH 1PC
Page 3
BOX 1
STEP 1 STEP 2
Place headboard panel face downward on soft surface.
Then attach left & right headboard leg to the correction
position of headboard panel as per diagram shown.
Align and fasten left & right headboard leg to
headboard panel using bolt,lock washer & flat washer
and tighten with Allen wrench.
ASSEMBLY INSTRUCTIONS
A
C
A
STICKER 'L'
B
STICKER 'R'
B
**BACK VIEW **BACK VIEW
4
2
3
C
1
BOX 1 & BOX 2
STEP 3
3.1) Align and hook bed rails to headboard leg and footboard.
3.2) Tap in the bed rails with a rubber mallet ( NOT INCLUDED ).
C
HB
G
D
3.1
G
3.1
3.2
G
PAGE 3 OF 4
Page 4
ASSEMBLY INSTRUCTIONS
Screw in bed slat support with leveler to bed slat.
STEP 5 STEP 6
PAGE 4 OF 4
Align and fasten bed slats to bed rails using screw and
tighten with screw driver (NOT INCLUDED).
Adjust leveler to touch the floor.
Complete
STEP 4
G
D
5
E
HB
Loading...