Page 1
Assembly Instructions
ASSEMBLY RATING
The Assembly Rating is a 5-point system that
shows the degree of effort needed in
assembling a specific product (with 1 being
easy and 5 being difficult). For some
products, two persons are recommended.
EASY
DIFFICULT
Page 1 of 4
Tools Required for Assembly:
Allen Wrench
(Included)
Page 2
Page 2 of 4
Page 3
MD
Before you begin, please read Page 2
of “Assembly and Care Advice”.
And remember, do not tighten until
each step is completed or instructed.
Parts List
#1 x 1 pc
Table Top
#2 x 4 pcs
Leg
Hardware List
#A x 8 pcs
Bolt 5/16”x2”
#B x 8 pcs
Lock W asher
#C x 8 pcs
Flat W asher
#D x 1 pc
Allen Wrench
Page 3 of 4
Page 4
I. Carefully place the table top (#1) facing down on a protected surface. Align the
legs (#2) with the pre-drilled holes on the bottom corners of the table top (#1).
II. Prepare 8 bolt assemblies by inserting FIRST the lock washer (#B) onto the bolt
(#A) and then the flat washer (#C) onto the SAME bolt (#A), in that order.
III. Insert the bolt assemblies through the pre-drilled holes on the bottom corners of
the table top (#1) and secure those bolts using the Allen wrench (#D) to lock them
with the legs (#2).
IV. Carefully turn the completed table upright. Make sure the table is rested on a flat
surface and it does not feel loose or wobbly. If it does, double check that the bolts
are secured and properly tighten.
#A x 8 pcs
#B x 8 pcs
#C x 8 pcs
Turn right (clockwise) to tighten
ASSEMBLY IS COMPLETED
Page 4 of 4
Loading...