Page 1
1. Check the hardwares against the hardware list to make
sure all items are present.
2. Assemble your furniture on a soft, flat surface to avoid
scratching the finish.
3. CAUTION: Do not over tighten screws, nuts or bolts
during assembly.
4. Your furniture may require occasional tightening.
ASSEMBLY INSTRUCTIONS
BEFORE YOU START:
HARDWARE LIST
Bolt (Ø5/16"x3-1/2")
Flat Washer (Ø5/16" )
Lock Washer (Ø5/16")
Allen Wrench (Ø5/16")
INSTRUCTIONS:
TOOLS REQUIRED:
Allen Wrench (Provided, Part D)
Figure 1
Figure 2
C
B
A
D
2. Attach the bottom shelf to the legs using Bolt (A), Lock
Washer (B) and Flat Washer (C) and tighten with the Allen
Wrench (D). As Shown in Figure 2.
3. Tighten all bolts before setting table back upright.
Thank you for purchasing our furniture!
Loading...