Page 1
4 pcs
4 pcs
FIGURE
DESCRIPTION
QTY
Table Top
Pedestal Stand
Pedestal Leg
1 pce
1 pce
Hardware Bag
1 pce
Mounting Plate
Levelers
42” ROUND TABLE
Thank you for purchasing this quality product.Be sure to check all packaging material
carefully for small parts that may have come loose inside the carton during shipment.
COMPONENT LIST: HARDWARE LIST:
This product will take 15-20
minutes to assemble.
1 pce
PART NO
1
2
3
4
FIGURE
DESCRIPTION
Hex Bolt
Lock Washer
Flat Washer
Wrench
QTY
12 pcs
12 pcs
12 pcs
1 pce
Reminders
1.Use only the hardware supplied.
2.Once the product is assemble,level and tighten all the bolts.
3.Do not over-tighten bolts.
4.This item may require periodic tightening
NOTE:
1.Two or two people are needed for assembly
2 please keep all hardware parts out of the reach of children.
MADE IN MALAYSIAPage 1 of 2
Page 2
ASSEMBLY :
STEP 1
1.1-Turn the Pedestal Stand upside down on a soft protective surface. Attach Leg by inserting pedestal leg through per-drilled holes on
pedestal.
1.2-Use Flat Washer(3), Lock Washer(2), Hex Nuts (1) and Wrench(4) to attached the pedestal Leg to the pedestal stand.
1.3-Repeat step 1.2 For the remaining pedestal legs Leg, once all pedestal leg been attached turn the Base assembly Right side up.
Wrench
Lock Washer
42” ROUND TABLE
Hex Bolt
Flat Washer
Pedestal Stand
Pedestal Leg
STEP 2
2.1-Align and attach the table top to the base Assembly by inserting Flat Washer(3), Lock Washer(2) and Hex Nut (1) tighten all nuts using
Wrench(4) provided.
Hex Nut
Flat Washer
Pedestal Stand
Wrench
Lock Washer
Mounting plate
STEP 3
3.1- Adjust the levelers until the table sits firmly.
Assembly is now Completed.
Page 2 of 2
CARE INSTRUCTION
~ Be sure to use the same type of polish consistenly.
Your furniture will appear cloudy or streaky if oil
based or wax based polishes are interchanged.
~ Spray your furniture surface evenly. Wipe in a
circular motion with a soft clean cloth.
MADE IN MALAYSIA
Loading...