Page 1
sStep 1 Click on " Install
Mega+2 Digital Camera" on
the autorun screen.
lStep 2 Click Next on the
Welcome screen.
lStep 3 The files will begin to copy
to your computer.
In order for you to download pictures from the camera to your
computer, you will need to install the driver.
Install the Driver
1
Place the LARGAN Digital CD-ROM into the appropriate
drive. The LARGAN Digital Main Menu screen will
automatically appear. If the main menu screen doesn't
appear, follow the directions below.
Downloading Photos
2
To download an individual photo:
lStep 8 Click on the desired photo. The
photo number will turn red when selected.
lStep 9 Click on the Save button located
at the right of the thumbnail viewer.
lStep 10 Type in the file name and click
on Save.
lStep 11 The photo has been stored in
the computer.
lStep 12 Click on the Exit button when you have finished
downloading your photos.
Note: To download all of the photos, click on the
Select All button. Next, click on the Save button.
To download files in a non-consecutive order, just click on the
desired photos, then click on the Save button.
It allows you to view photos that
are stored in the camera's
memory. You are now ready to
download your photos to the
computer.
Step 7
lStep 7 You also can click on the
button to view the enlarged image on
the image browser.
Step9
Step8
Step10
Mega+2 digital camera
Mega+2 digital camera
Mega+2 digital camera
Note: Always use the same USB port when using your
digital camera.
Mega+2 digital camera
Mega+2 video camera
Mega+2 video camera
Mega+2 video camera
Mega+2 video camera
lStep 1 Connect the camera to your computer using the
USB cable.
lStep 2 Click on Start from the Windows Task Bar.
lStep 3 Click on Programs.
lStep 4 Click on Largan Digital Camera program group.
lStep 5 Click on the Mega+2 Digital Camera icon.
lStep 6 The Largan thumbnail viewer will appear.
Note: Now the wizard will install the video side of the camera
(continue to the next step).
lStep 11 The
he screen
lStep 12 Select Install the software
automatically (Recommended).
Click Next to continue.
lStep 13 Please wait while the
wizard searches.
lStep 14 The installation will start
to install the Mega+2 video camera.
lStep 15 Click Finish. The Mega+2
video camera has been successfully
installed.
lStep 16 The screen will display
"Your new hardware is
installed and ready to use", the
Mega+2 driver is now successfully installed.
Found New Hardware
Wizard detects the camera. T
will show Found New Hardware.
lStep 4 Click "Finish" to end
the setup.
lStep 5 In order for the driver to take
effect, you should click "OK" to restart
your computer now.
lStep 6 Connect the camera to the
computer using the USB cable. The
screen will show Found New
Hardware.
lStep 7 Select Install the
software automatically
(Recommended). Click Next to
continue.
lStep 8 Please wait while the
wizard searches.
lStep 9 The installation will start
to install the Mega+2 digital camera.
lStep 10 Click Finish. The Mega+2
digital camera has been successfully
installed.
lStep 1 Double-click on the
My Computer icon on your
desktop.
lStep 2 Double-click on the
CD-ROM icon.
lStep 3 Double-click on the
Autorun icon.
lStep 4 The LARGAN Digital
Main Menu screen will appear.
Note: You can also download the driver via the Largan website.
Please go to www.largan.com for more details.
Accessing the CD
Page 2
Quick Start Guide
1-628-13-0021-02
Using the Video Recording Feature
4
l Step 2 Press Mode/Power button. The camera will beep.
l Step 3 Connect the camera to your television via the TV cable.
l Step 4 Press the Mode/Power button 4 times until
the icon" " appears in the menu.
l Step 5 Press the Mode/Power button one time.
l Step 6 The menu in the camera will display (001) photos.
l Step 7 Press Select or Select button to move the
white line box to the desired image in the multi-image replay
mode via the television.
l Step 8 Press the button to enlarge the desired image.
Select the other enlarged images by pressing Select or
Select button.
Note: Press the Mode/Power button to go back to the
multi-image play mode.
l Step 9 In enlarged image replay, select the AVI file you wish
to play using the Select or Select button. Then press
the button to play the movie. You can press the
button again to pause the movie.
l Step 10 At the same time, you can also delete the image,
press the Shutter button 2 times.
NTSCNTSC
To take the photo in TV mode follow the steps below.
NTSCNTSC
Taking Photos in TV Mode
5
lStep 1 Press the Mode/Power button until you see
the icon appears.
lStep 2 Press the Select button until you see the
icon appears.
lStep 3 Press the button, u
lStep 4 Press the button again when you complete
a video file
Note: If the video is u
lStep 5 Connect the camera to your computer via the USB cable.
lStep 6 Click on the Mega+2 Digital Camera icon by
the following. And the thumbnail viewer will now appear .
Start \ Programs\ Largan Digital Camera program
group \ Mega+2 Digital Camera
Shutter sing the optical finder to
compose images.
Shutter
.
nder 16 MB, you can record several
video files.
l Step 1 Make sure the batteries are properly inserted into the
camera.
l Step 2 Press Mode/Power button. The camera will beep.
l Step 3 Connect the camera to your television via the TV cable.
l Step 4 Press the Mode/Power button 4 times until
the icon" " appears in the menu.
l Step 5 Compose the picture and press the button.
Shutter
++
22
MegaMega
2.0
MEGAPIXEL
AVI icon
To use the preview feature follow the steps below.
l Step 1 Make sure the batteries are properly inserted into
the camera.
Using the Preview Feature in TV Mode
6
Erasing Photos from the Camera
3
To erase all of the photos:
lStep 1 Disconnect the camera from the USB cable.
lStep 2 Press the Mode/Power button 3 times until you
see the icon appear in the menu panel.
lStep 3 Press and hold the Shutter button down for
3 seconds. Notice how the menu panel displays zero (0) photos.
lStep 4 Press and hold on the Mode/Power button to turn
the camera off.
Note: When the camera is connected to the computer by
the USB cable, you can click on the button located at
the thumbnail viewer.
lStep 7 Left click on the image
browser icon.
lStep 8 The image browser will
appear.
lStep 9 Click on the AVI icon
located below the image thumbnail.
lStep 10 The image browser will
appear. Press the icon to
play the movie.
lStep 11 If you want to stop during
playback, press the icon or
press the icon to pause the
playback.
lStep 12 Press or icon
to view the other enlarged image
on the image browser.
Image
browser
icon
Loading...