Lapp USA SKINTOP FLEX Catalog Page
PG & Metric Thread
SKINTOP
Strain Relief Cable Glands
SKINTOP® FLEX
Spiral Strain Relief with PG & Metric Thread
®
SKINTOP® FLEX is a liquid-tight, spiral strain relief that oers additional
safety against overstress and conductor breakage. It is ideally suited for
hand held equipment, moving machinery, and robotics.
Approvals: PG*
Approvals: Metric*
Technical Data
Material:
- Body: Polyamide
- Bushing: CR
Locknuts: Included for ‘S’ part numbers
Temperature Range:
- PG: -20°C to +80°C
- Metric: -20°C to +100°C
Color: Black (RAL 9005), UV resistant
Gray (RAL 7001)
Protection: 70 PSI
- Seal: IP68, 5 bar
(Exceeds NEMA 6/6P pressure rating)
Application Advantage
• Superior bending protection for cable conservation
and functional reliability
• The heavy duty SKINTOP® design provides great
pullout strength and very reliable strain relief
• Superior integrated locking mechanism includes an
internal ratchet for vibration-proof protection
• Multi-trapezoidal thread requires just one twist to
tighten
• Generous high-quality neoprene bushing provides a
liquid-tight and dust-proof hermetic seal
Part Number
with Locknut
Black Gray Black Gray (inches) (mm) (inches) (inches) (inches)
SKINTOP® SL FLEX: Standard PG
S2307 S1307 53015800 53015600 PG 7 Recognized 0.098 - 0.256 2.5 - 6.5 0.591 2.442 0.315 100
S2309 S1309 53015810 53015610 PG 9 Recognized 0.137 - 0.315 3.5 - 8.0 0.748 2.895 0.315 100
S2311 S1311 53015820 53015620 PG 11 Recognized 0.157 - 0.394 4.0 - 10.0 0.866 3.388 0.315 100
S2313 S1313 53015830 53015630 PG 13 Listed 0.236 - 0.472 6.0 - 12.0 0.945 3.861 0.354 50
S2316 S1316 53015840 53015640 PG 16 Listed 0.354 - 0.551 9.0 - 14.0 1.063 4.393 0.394 25
S2321 S1321 53015850 53015650 PG 21 Listed 0.512 - 0.709 13.0 - 18.0 1.300 5.082 0.433 25
®
SKINTOP
SKINTOP® SLM FLEX: Standard Metric
Orders of 2000 pieces or more per item will be bulk packaged unless otherwise requested.
* If the end-use application consists of inserting the SKINTOP® cable gland through a non-threaded hole, then the use of a locknut is required per UL.
Photographs are not to scale and are not true representations of the products in question.
For current information go to our website. If not otherwise specied, all values relating to the product are nominal values.
SLR FLEX: Reducer PG
S2407 S1407 53015900 53015700 PG 7 Recognized 0.059 - 0.197 1.5 - 5.0 0.591 2.441 0.315 100
S2409 S1409 53015910 53015710 PG 9 Recognized 0.079 - 0.236 2.0 - 6.0 0.748 2.894 0.315 10 0
S 2411 S1 411 53015920 53015720 PG 11 Recognized 0.079 - 0.276 2.0 - 7.0 0.866 3.386 0.315 10 0
S241 3 S 141 3 53015930 53015730 PG 13 Listed 0.157 - 0.354 4.0 - 9.0 0.945 3.858 0.354 50
S241 6 S 141 6 53015940 53015740 PG 16 Listed 0.236 - 0.472 6.0 - 12.0 1.063 4.399 0.394 25
S2421 S1421 53015950 53015750 PG 21 Listed 0.354 - 0.630 9.0 - 16.0 1.299 5.079 0.433 25
S2707 S1707 53111700 53111600 M12 x 1.5 Recognized 0.137 - 0.275 3.5 - 7.0 0.591 2.521 0.315 100
S2709 S1709 5 3111710 5 311161 0 M16 x 1.5 Recognized 0.177 - 0.394 4.5 - 10.0 0.748 3.388 0.315 100
S2 713 S1713 5 3 1117 2 0 53111620 M20 x 1.5 Listed 0.275 - 0.512 7.0 - 13.0 0.985 3.979 0.315 50
S2 716 S1716 5 3 1117 3 0 53111630 M25 x 1.5 Listed 0.354 - 0.669 9.0 - 17.0 1 .18 2 4.925 0.354 25
S2 721 S 1721 53111 74 0 5 31116 4 0 M32 x 1.5 Listed 0.433 - 0.827 11.0 - 21.0 1. 418 5.870 0.394 25
Part Number
without Locknut*
Thread Type
& Size
UL Status
øF
Clamping Range
SW
Wrenching
Flats
C
Overall
Length
D
Thread
Length
800-774-3539 • www.lappusa.com • www.lappcanada.com • www.lappmexico.com
Standard
Pack Size
13
Loading...