FEBL610Q102-03
ML610Q102 Reference Board
User’s Manual
Issue Date: Feb 20, 2013
ML610Q102 Reference Board User’s Manual
NOTES
No copying or reproduc tion of thi s docum ent, in part or i n w hole, is perm itted without t he consent of LAPIS Sem iconductor C o., Ltd.
The content specified herein is subject to change for improvement without notice.
The content specif ie d here in is f or the pur pose of intr od ucing LA PIS Sem ic onductor ' s pr oducts ( herei naf ter " Products" ). If y ou wish
to use any suc h Product , plea se be sure to ref er to the s pecif ications , whic h can be obtaine d from LA PIS Semic onductor upon re quest.
Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and
operations of the Products. The peripheral condit ions must be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage
arising from any inaccuracy or mi sprint of such information, LAPIS Semiconductor shall bear no responsibility for such damage.
The technical information sp ecified herei n is intend ed only to show the typi cal fun ctio n s of and examples of ap pl icati on ci rcuits fo r
the Products. LA PIS Sem iconduc tor doe s not g rant y ou, ex plicitly o r im plicitly , any licens e to use or ex erc ise inte llectua l property or
other rights held by LAPIS Semiconductor and other parties. LAPIS Semiconductor shall bear no responsibility whatsoever for any
dispute arising from the use of such technical information.
The Products specified in th is document are intended to be used with general-us e electronic equipment or devices (su ch as audio
visual equipment, o ffice-automation equipment, communication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While LAPIS Semiconductor always makes efforts to enhance the quality and reliability of its Products, a Product may fail or
malfunction for a variety of reasons.
Please be sure to implement in your eq uipment using the Pro ducts safety measures to guard a g a inst th e possib ility of physical i njury,
fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe
designs. LAPIS Sem ic onduct or sha ll bear no res ponsi bility w hatsoe ve r for y our use of any Product ou tside of the presc ribed scop e or
not in accordance with the i nstruction manual.
The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high
level of reliability the f ailure or m alf unction of whic h m ay re sult in a dire ct t hreat to hum an lif e or cr eate a risk of hum an injury (such
as a medical instrument, transportati on equipment, aerospace machi nery, nuclear-reactor controller, fuel-co ntroller or other safety
device). LAPIS Semic onduc t or s h a ll bea r no res pons i bility in any way for use of any of the Produc ts f or the a bov e spe c ia l purp oses.
If a Product is intended to be used for any such special purpose, please contact a ROHM sales repres entative before purchasin g.
If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign
Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law.
Copyright 2013 LAPIS Semiconductor Co., Ltd.
1
ML610Q102 Reference Board User’s Manual
ML610Q102 Reference board is prepared by LAPIS SEMICONDUCTOR to have you study the operations of
ML610Q102.
The board is only minimu m necessary compone nts are mounted o n the board by LAPIS SEM ICONDUCTOR for brief u se
of ML610Q102.
By using the board with "uEASE on-chip debug emulator" (hereinafter referred to "uEASE") and "free sample U8
Development Tools CD-ROM" which is bundled in the package of uEASE not only Software development/debugging but
also writing Flash ROM in the devices are capable.
This board also works in stand alone mode with external power suppy without uEASE.
Before starting works wi th this board, read below carefully and understand notices.
1. The board features
Supports flash ROM programming and on-chip debugging (using RESET_N and TEST pins)
2. The board hardware specifications
Please refer to the reference schematics for detail on connections of each hardware parts.
Embedded microcontroller U1: ML610Q102
J1: Jumper for RESET_N switch ( 3pin pin-header and short pin )
J2: Jumper for VDD switch ( 3pin pin-header and short pin )
Embedded parts
Operating voltage +2.7V to +5.5V
Board size 30.00 x 40.00 mm
CNU1,2: Connector for Peripheral
CNUE: Connector for on-chip debug emulator ( 14pin connector )
C1 – C3: Capacitors for power supply
3. Parts layout
J2
CNU2
J1
<fig.1 Parts layout>
CNU1
2
ML610Q102 Reference Board User’s Manual
4. Notes on use
(1) The information contained herein can change without notice owing to product and/or technical improvements.
Before using the product, please make sure that the information being referred to is up-to-date.
(2) Before using this board, read carefully and understand the contents of the ML610Q102 user's manual and the
uEASE user's manual.
(3) The engineering sample of ML610Q 102 is mounte d on the boar d.
Therefore, please confirm the characteristic finally by using MP of ML610Q102 and customer's mass production
boards.
(4) When you use uEASE, please set J1 jumper to the uE side.
(5) When a power supply is given from the exterior, please be given by pin4 of CNU2 connector and set J2 jumper to
the USR side.
(6) When you set J2 jumper to the USR side and uEASE is connected, please turn ON the power supply of a board
before starting uEASE.
Moreover, please stop uEASE before turning off the power supply of a board.
(7) When J2 jumper is set to the uE side, the power supply capacity of uEASE. is +3.3V/100mA.
(8) This board has a conductivity pattern in the back, therefore it may short-circuits when it is used having put on the
existing conductive component.
5. Reference schematic:
The reference schematic of this reference board is shown below.
CNUE
9,11,14
uE
J2
USR
13
1
7
3
5
2,4,6,8,10,12
CNU1
1
2,5,8
3
4
6
7
9
10
USR
J1
uE
C1
0.1u
1
2
3
4
5
6
7
8
RESET_N
TES T
PB0
PB1
PB2
PB3
PA2
VPP
ML610Q102
PA0
PB7
VDD
VSS
PB6
PB5
PB4
PA1
16
15
14
13
12
11
10
9
C2 C3
0.01u 4.7u
CNU2
1
2
4
3,5,8
6
7
9
10
<fig.2 Reference schematic>
3
ML610Q102 Reference Board User’s Manual
6. Reference dimensions
The reference dimentions of this reference board is shown below.
Origin
40.64mm
1pin (X,Y)=(10.16,35.56)
CNU2
J2
U1
CNUE
J1
1pin (X,Y)=(10.16,2.54)
<fig.3 Reference dimensions>
CNU1
30.48mm
Y(mm)
X(mm)
4
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
ROHM Semiconductor:
ML610Q102 reference board
Loading...