Lanzar Car Audio OPTIX-10 User Manual

user’s manual

www.lanzar.com

OptiX-10

OptiX-10

10-Channel Active

Electronic Crossover Network

with Subwoofer Level Control

INTRODUCTION...

Congratulations on your purchase of a new Lanzar Opti signal processor. Opti mobile electronics are some of the most advanced
car audio products available. These quality audio products are designed and engineered to afford you years of uncompromising
musical service. Lanzar has utilized the latest electronic technologies in order to deliver a superb listening experience.

The X10 Active Crossover offers the listener the ability to enjoy the finest in mobile audio. The X10 unleashes the effortless,
natural and open quality of the real performance. Car audio systems which utilize passive crossovers feed the music through
chokes and capacitors, which creates a “bottleneck” through which the music must pass. Portions of the program material may
pass through at different speeds, creating distortion – some of the music doesn’t make it through at all!

With the Lanzar Opti X10 you’ll hear all the dynamics in the bass, and still hear delicacies like fingers sliding across guitar
strings. The X10 also allows the user to group amplifiers and separate speakers in discrete assemblages so they play as one
cohesive unit, in harmony with each other. The X10 becomes the music conductor in the system, balancing volume, assigning
the proper part of the music to a specific instrument, delaying some sounds so they reach your ear just as the rest of the music
does, with the sole purpose of creating the illusion that there is only the music.

table of contents

general features

precautions

features and specifications

system wiring

mounting and installation

noise check and system adjustment

troubleshooting

2
3
4-6
7-11
12-13
14
15

general features

10 Crossover Channels
Blue Light Illumination
4 Channel Inputs
Signal Pass-through for Additional Processors
Remote Bass Level Control
High Channels: Separate Front and Rear Frequency and Gain Controls
Mid Channels: Separate Front and Rear Frequency and Gain Controls
Sub Channels: Frequency and Gain Control
Selectable Q Settings for Front and Rear Channels
Subwoofer Stereo/Mono Switch
High Channel and Subwoofer Phase Inverters
Bass Boost Frequency and Level Control
Gold-Plated Connectors and Terminals

2

Precautions

To prevent short circuits, be sure to disconnect the negative battery ground lead before wiring the system up.

When you finish the installation, be sure to make one more check to be sure everything is done correctly.

Reinstate all car parts that were removed.

Reconnect the negative battery ground lead.

3

features and specifications

4