Q: What is the use of the variable low-pass filter?
A: Variable low-pass filter with adjustable frequencies from 50Hz to 150Hz for OPTI 1200HC and OPTI 2200HC and 50Hz to only 120Hz for OPTI 600X2HC and OPTI 400 X 4HC gives the flexibility in adjusting the transmitting frequency band upper point to subwoofers.
Q: Will the amplifier be able to power several speakers?
A: The OPTI 600X2HC and OPTI 400 X 4HC are able to power several speakers in accordance with the impedance of the speaker.
Q: What can I do in case of the amplifier becoming excessively hot?
A: Be sure to verify that there is enough ventilation around the amplifier, the minimum speaker impedance is correct and that there are no speaker shorts.
Q: How am I to connect the remote gain control?
A: The amplifier has a remote bass boost input that can be used in conjunction with a gain control that is then bolted onto or under the dashboard.
Q: Does the amplifier have any protection circuitry embedded?
A: Indeed, there is protection circuitry embedded in the amplifier that includes thermal overload, short circuits and other issues.
Q: In case the amplifier does not turn on, what do I need to do?
A: Make certain that the ground connection is properly installed, validate the remote DC terminal for the relevant voltage, check the battery on the + terminal, and replace all blown fuses. If the Protection LED is lit, switch the power off, and its provided turned back on for it.
User Manual
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
Page 16
Page 17
Page 18
Page 19
Page 20
Page 21
Page 22
Page 23
Page 24
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.