Lanzar VIBE X2 Owners Manual

www.lanzar.com

INTRODUCTION

FEATURES:

1

FUNCTIONS

1. SIGNAL INPUTS

To be connected to the output of the source unit.

2. LOW PASS SUBWOOFER OUTPUT TERMINALS

To be connected to the subwoofer channel amplifier left/right inputs.

3. HIGH PASS CHANNEL OUTPUT TERMINALS

To be connected to the channel amplifier left/right inputs.

4. FUSE

This crossover uses a 1-amp,blade-type fuses for protection from power surges or
a short circuit.

5. POWER INPUT TERMINAL (12V)

To be connected to the positive terminal of your vehicle battery or other constant
+12V source.

6. REMOTE TURN-ON INPUT TERMINAL (REMOTE)

To be connected to the remote control wire or antenna lead of the source unit for
remote ON/OFF.

7. GROUND INPUT TERMINAL

To be wired to the vehicle's chassis ground.

8. POWER INDICATOR

This indicator lights up when the internal switching power supply is activated and
the unit is operational.

2