Lanzar OPTIIFB1448 Installation Manual

SPECIFICATIONS

Model: OPTIIFB10448
FOUR POSITION MINI ANL FUSED DISTRIBUTION BLOCK

Blue Digital DC Voltage / Amperage Meter, Blue fuse status LED
1 * 0 & 1 * 4 GA INPUT AND 4 * 4/8 GA OUTPUT

Model: OPTIIFB102428
FOUR POSITION MINI ANL & ANL FUSED DISTRIBUTION BLOCK

Blue Digital DC Voltage / Amperage Meter, Blue fuse status LED
1 * 0 & 1 * 4 GA INPUT AND 2 *4 GA & 2 * 4/8 GA OUTPUT

Model: OPTIIFB1448
FOUR POSITION AGU FUSED DISTRIBUTION BLOCK

Blue Digital DC Voltage / Amperage Meter, Blue fuse status LED
1 * 0 & 1 * 4 GA INPUT AND 2 *4 GA & 4 * 8 GA OUTPUT

DETAILED FEATURES:
a) Chrome plated block conductor to provide the lowest inner resistance for large

current speed passing. the car audio system can get the best performance.

b) The blue displays are with Amperage (Amp) and DC Voltage meter features

that measurement value can arrive 1 AMP (A) and 0.1 DCV range. You can
choose the correct gauge power wire for your car audio system after refer the
amperage value of the meter. The Amp/power wire gauge compare list table,
please refer attached table in next page.

c) Blue LED appears the fuse status of fuse block/holder. If the fuse break, then

the fuse status LED will turn off to note the user. When the fuse break, the
buzz of PCB will issue the noise for 20~30 seconds. If you exchange the well
new fuse, then LED and buzz will comeback normal status.

d) Over voltage limit and low battery voltage limit warning. When the system

voltage peeks over 1 7.5~18 DCV (over voltage lim it s tatus) or LESS than 10
DCV (low-battery status). The buzzer on the PCB will issue an audible noise
warning.

POSITIVE
(OUTPUT)

POSITIVE
(INPUT)

- 1 -

POSITIVE
(INPUT)

POSITIVE
(OUTPUT)

- 2 -