Lanzar AQMP70BTS User Manual

1

AQMP70BTS

OWNER’S MANUAL

Mobile Audio System

 PLL Synthesizer St er eo Radio
 Automatic Memory St or ing
 USB &SD/MM C Ca r d Interf a c e
 Fold Down Detachable Panel
 Auxilia r y Input Func tion

 Bluetooth Hands-free function & A2DP (Advanced Audio

Distrib ut ion Profi le) St er eo Audio Transmiss ion

 Smartphone(Andro id and IOS sys t em) control

www.Lanzar.com

2

CONTENTS

Installation.................................................3

DIN Front-Mount (Method A) ...................3

Installing the unit....................................3

Removing the unit .................................4

D IN Re a r -Mount (Method B)....................5

Using the detachable f r ont panel ........6

SD/M M C oper at ion.. ............................... 11

Bluet oot h ope r at ion ............................... 12

Preparin g for operation ........................ 12

Pairing .................................................... 13

Connect .................................................. 13

T-menu ................................................... 13

Wi r i ng Connection ..................................7

ISO conn ect ion ..........................................7

Location of keys ......................................8

Basic operati on........................................9

Switching on/off the unit ...........................9

Faceplat e r elease ......................................9

Sound adjustment .....................................9

Loudness ....................................................9

Display.........................................................9

Equalization ................................................9

Reset f uncti on ............................................9

Mode sel ection...........................................9

System setting ...........................................9

Auxil iary in put.............................................10

Radio oper ation .......................................10

Select in g the frequ ency ban d ..............10

Select in g a stat ion .................................10

Aut om atic mem ory storing & program

scanning..................................................10

Scan.........................................................10

Station storing ........................................10

Making an outgoing c all ....................... 14

Tr ansfer th e call betw een mobile phone

and the unit ............................................ 14

Bluetooth audio (A2DP function) ........ 14

Remot e Cont r ol …….…………………..17

Specification ............................................ 18

T r oubl e shoot ing .................................... 19

USB play operat i on.................................10

Switching to USB mode........................10

Selecting files .........................................10

Pausing playing .....................................10

Pr eviewing all files.................................10

Repeat ing th e sam e file........................10

Playing all files in random ....................10

Select in g dir ect ory up/ down ................10

Selecti ng tracks .....................................11

Display I D3 inf ormation………………11

3

INSTALLATION

30

53mm

182mm

Notes:

 Choose the mounting location where

the unit will not interfere with the
n or m al drivin g fun ction of the dr iver.

 Before f inally install in g the unit, connect

the wiring temporarily and make sure it
is all connected up properly and the
un it and the system work properly.

 Use only the parts included with the

unit to ensure proper installation. The
use of unauthorized parts can cause
malfunctions.

 Consult with your nearest dealer if

instal lation requires the drilling of holes
or oth er modifications of the vehicl e.

 Ins tall the unit w here it does not g et in

the driver’s way and ca nnot injure the
passen ger if th er e is a sudden stop, l ike
an em ergen cy stop.

 If installation angel exceeds 30°from

hori zontal, the unit mig ht no t gi ve its
optimum perf ormance.

 A void ins tal ling t he unit whe r e it would

be su bj ect t o high temperatu r e, such as
from direct sunlight, or from hot air,
from the heater, or where it would be
subject to dust, dirt or excessive
vibration.

DI N FRONT/REAR-MOUNT

This unit can be properly installed eith er
from “Front” (conventional DIN Front-mount)
or “Rear” (DIN Rear-mount installation,
u t il izin g threaded scr ew hol es at the sides
of th e unit ch assis). For details, ref er to the
fol lowing illustrat ed inst all ation methods.

DIN F RONT-MOU NT (Method A)

Ins ta lla tion Op e n ing
This unit can be insta lled in any dashboard
h avin g an opening as shown below:

Installing the uni t
Be sure yo u test all connections first, and
then follow these steps to install th e unit .

1. Make sure the ignition is turned off, and
then disconnect the cable from the
v ehicl e battery ’s negat ive (-) terminal.

2. Disconnect the wire harness and the
antenna.

3. Press the release butto n on the front
panel and remove the control panel
(see the steps of “removing the front
panel”).

4. Lift the top of th e outer trim r in g th en pull
it out to remove it.

5. The two supplied keys release tabs
inside the unit’s sleeve so you can
remove it. In s ert th e keys as far as

4

INSTALLATION

Tabs

Screwdriver

Sleeve

Dashboard

Mounting Bolt

Spring Washer

Plain Washer

Tapping Screw

Hex Nut

Metal Strap

they will go (with the notches facing up)
into the appropriate slots at the middle
left a nd right sides of the unit. Then slide
the sleeve off th e back of th e unit.

Outer Trim Ring

Front Panel

L Key

6. Moun t the sl eev e by insert ing th e sleeve
into the openi ng of the dashboard and
bend open the tabs located aro und t he
sleeve with a screwdri ver. Not all tabs

Sleeve

R Key

back of th e unit in plac e. Use the
su ppl ied har dware (Hex Nut (M5mm)
an d S pr ing Washer) to attach one end of
the strap t o the mountin g bolt on th e back
of th e unit. If necessary , bend th e m et al
str ap t o fit your vehicl e’s mount ing ar ea.
Then use the s upplied hardware
(Tappin g Screw ( 5x25m m) and Plain
W asher) to attach th e other end of met al
str ap t o a solid met al part of the vehicl e
un der th e dashboar d. This strap also
h el ps ensure proper elec trical grounding
of th e unit.
Not e to in st all th e shor t threadin g

ter m in al of the mountin g bolt to the back
of th e unit and the oth er long threadin g
terminal to the dashboard.

will be able to make contact, so
examine which ones will be most
effective. Be nding ope n the appropri ate
tabs behind the dashboard to secure
the sleeve in place.

7. Reconnect the wire harness and the
an t enna and be careful not to pin ch any
wires or cables.

8. Slide the unit into the sleeve until it
locks into place.

9. To further secure the unit, use the
su ppl ied m etal strap to secu r e th e

10. Reconnect the cable to the vehicle
batt ery ’s negat iv e (-) terminal. Then
repl ace th e outer trim rin g and install th e
un it’s f r ont pan el (see the steps of
“installing the fr ont pan el ”).

Removi ng t he uni t

1. Make sure the ignition is turned off, the n

disconnect the cable from the vehicle
batt ery ’s negat iv e (-) terminal.

2. Remove the metal strap attached the

back of th e unit ( if attach ed).

3. Press th e r elease button to remove the

5

INSTALLATION

Dashboard or Console

Screw

Factory Radio
Mounting Bracket

Side View showing
Screw Holes marked
T, N

Screw

front panel.

4. Lift the top of the outer trim ring th en pull
it out to remove it.

5. Inse rt bo th of the s upplied ke ys into the
slots at the middle left and right sides of
the unit, then pull the unit out of the

To fasten the unit to the factory radio
mounting brackets .
Align the screw ho les on the b racket with
the screw holes on the unit, and then

dashboard.

DIN REAR-MOUN T ( Met hod B)

If your vehicle is a Nissan, Toyota, follow
these mounting instructions.
Use the scre w holes marked T ( Toyota), N
(N issan) located on both sides of th e unit to
fast en th e unit to th e f actory radio mou nt in g
bracket s su ppl ied w ith your v ehicle.

tigh t en the screws (5x5mm) on each side.
Note: the outer trim ring, sleeve and the
metal strap are not used for method B
installation.

6

USING THE DE TACHABLE F RONT PANE L

REM OVING T HE F RONT PANEL

Precaut ions when handli ng

1. Press the release button (

fr ont panel and pull o ff the f ron t p anel.

2. Keep front panel into the case.

) on the

1. Do not drop th e front panel.

2. Do not put pressure on the display or
c ontrol buttons when removing or
installing the front panel.

3. Do not touch the cont act s on the front
pan el or on the m ain unit body. It may
resul t in poor electrical contact .

4. If any dirt or foreign subst ances
adh er ed on th e cont acts, they c an be
removed with a clean and dry cl oth.

5. Do not expose th e front pan el to high
tem per atu r es or direct sun l ight in
anywhere.

6. Keep away any volatile agents (e.g.
benz ene, thinn er , or insecticides) fr om
touching the surface of the front panel

7. Do not attempt to disassemble the front

I NSTAL LING T HE FRONT P ANEL

To inst all the front pan el, insert th e panel

int o th e hous in g and make sure th e panel
is properly in stalled. Otherwise,
abn or m ality occur s on th e display or
some ke ys wi ll not f unction proper l y.

panel.