LANYA ELECTRONIC EM529 Users Manual

EM529 User’s Manual

User’s Manual ：

1．To switch on.when EM529 is in off state. Until the blue indicator light

turns on and flashes 3 times.

2．To switch off.when EM529 is in on state. Until the red indicator light

turns off and flashes 3 times.

3．Pair the headset with a compatible phone

The headset must be powered on before you begin to initiate the paring .

Press and hold the answer/end key for 7 seconds until blue and red light

flashes alternately. The headset is now in paring mode.

Activate the Bluetooth feature on the phone. And set the phone to search

for Bluetooth devices .Check the user guide of your phone for

instructions.

Select the headset(EM529) from the list of found devices .

When asked the PIN code,Please enter”0000” to pair and connect the

headset to your phone.In some phones you may need to make the

connection separately after pairing .See the user guide of your phone for

details.

4．Answer a call

When there is coming call.press the answer/end key. Or use the phone

key to answer the call.

5．End a call

After finishing the call .press the answer/end key .or use the phone key to

end the call .

6．Refuse a call

When there is a coming call,Press and hold the answer/end key for 3

seconds until you can hear beep sound from the headset.

7．Voice dialing

It is possible to make a call directly from the headset using voice

recognition. Press and hold the answer/end key for 3 seconds until you

can hear beep sound from the headset.(To use this voice dialing

function ,your mobile phone must provide this option and corresponding

voice samples must have been recorded.)

8．Redial

Double press the answer/end key and you can hear beep sound from

headset. Release the answer/end key and the headset will dial the last