LANYA ELECTRONIC BT09 Users Manual

Users Manual

1 Sketch map

2．Speaker Operation

function status before operate operation indicator light on

speaker

switch on switch off status long time press power

key for 3s

switch off switch on status long time press power

key for 3s

play/pause connecting status short time press

MULT key

VOL+ play status Long time press

VOL+/VOL-

VOL- play status short time press

VOL+/VOL-

connection no connect status short time press Mult

key

Light Switch on status short time press light

key

red light light

indicator light off

Blue light long time

Blue light long time

Blue light long time

Blue LED light long
time
Two side light will be
lighted

Low battery warning: when 6pcs 3A battery’s total voltage are 7.2V

(average every pcs lower than 1.2V), the red light will flash every 20s,

meantime will hear a sound “dudu”. Means need to change the battery.

Play/Pause: Press MULT key just speaker mute, the music won’t stop to

play.

If switch on the speaker at first, then switch on the adapter and 3.5mm

cable connect with adapter, the adapter and speaker will connect

automatic.

If the adapter switch off then switch on, it could connect speaker

automatic, however, if speaker switch off then switch on, it need to press

MULT key or speaker key to connect.

FCC WARNING

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.

NOTE 1: Any changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user's authority to operate the
equipment.