Lantronix Xpress-Pro SW 52012F, Xpress-Pro SW 92012F, Xpress-Pro SW 94012F, Xpress-Pro SW 52000, Xpress-Pro SW 92000 Supplementary Manual
...
XPress-Pro SW Series Hardened
Ethernet Switches
Enabling Communication for the Demanding
Industrial Environment
Part of the DeviceLinx™family of network-
enablement products, XPress-Pro™SW series
managed and unmanaged Ethernet switches are
designed to give you performance you can count
on in harsh industrial environments.
Whether they’re on the factory floor or in the
field, XPress-Pro switches will provide flawless
communication when you need it most.
Combined with our industrial device servers,
this complete line of rugged, dependable and
affordable switches delivers a robust industrial
device networking solution.
DEVICE NETWORKING
XPress-Pro SW Series Hardened Ethernet Switches
Din Rail 24VDC
Redundant power
supply
PWR1
AC
PWR2
Workstation
Alarm
1
XPress-Pro SW
94000
A
B
0
0
1
/
0
R
S
T
P
If the PWR1 fails, the Pow
Alarm
will be Act
PW
R
2 will backup autom
E
S
A
B
0
0
1
SCADA
E
S
0
1
100BASE
0
1
/
Server
E
S
A
B
0
er
ivated, and
at
PWR1
Conveyor Belt
ically.
AC
PWR2
XPress-Pro SW
94000
1
Workstations
Programmable
Logic Control
A
B
0
0
1
/
0
E
S
Auto Packing
Machine
10/100BASE Copper
100BASE Fiber
Backup
Path
XPress-Pro 8-port models feature redundant power inputs
and a relay for power failure alarms.
XPress-Pro Industrial
Ethernet Switches are DIN-rail
mountable and offer:
Compliant with IEC61000-6-2 EMC generic immunity standard
for the industrial environment
Full wire-speed forwarding rate
Alarms for power failure by relay output (8-port only)
Fiberoptic interfaces
XPress-Pro SW 94000 Series
The XPress-Pro SW 94000 is a managed Ethernet switch, allowing the user to log in and create virtual LANs,
configure ports, mirror ports and more. SW 94000 switches deliver the flexibility of eight 10/100 Ethernet
ports with an optional fiberoptic interface. XPress-Pro SW 94000 switches can be DIN-rail, shelf or wall
mounted, and come with dual redundant power inputs via a terminal block.
4K MAC addresses
256 KB buffer memory
Redundant 2A max,10 to 30 VDC power inputs
-34°to 74°C (-29°to 165°F) operating temperature range
Hardened aluminum case
Supports DIN-rail,panel,or rack-mounting installation
Complies with NEMA TS1 and TS2 environmental requirements
for traffic control equipment
IEEE802.1w RSTP and IEEE802.1D STP compatible
IP multicast filtering through IGMP snooping
Supports port-based VLAN and IEEE802.1Q VLAN tagging and GVRP
IEEE802.1p QOS classification based on port-based priority,VLAN priority
field in VLAN-tagged frame,DS/TOS field in IP packet,UDP/TCP logical ports
8-port-based trunking groups with up to 8 ports per group
Rate control
Packet filtering and port security:destination MAC and static MAC address
are not subject to aging;secure mode freezes MAC address learning
Port mirroring
Alarms for power failure by relay output
UL 1604:Class 1,Division 2 classified for use in hazardous locations
>
94000 Diagram
XPress-Pro SW 94000 Series
XPress-Pro SW 92000 Series
XPress-Pro SW 92000 switches offer eight 10/100 Ethernet ports and an optional fiberoptic interface.
They can be DIN-rail, shelf or wall mounted, and come with dual redundant power inputs to fit applications
requiring a tough, environmentally hardened Ethernet switch.
2048 MAC addresses
768 kilobit buffer memory
Redundant 2A max,10 to 48 VDC power inputs
-34°to 74°C (-29°to 165°F) operating temperature range
Hardened aluminum case
Supports DIN-rail,panel,or rack-mounting installation
Comply with NEMA TS1 and TS2 environmental requirements
for traffic control equipment
Alarms for power and port link failure by relay output
UL 1604:Class 1,Division 2 classified for use in
hazardous locations
XPress-Pro SW 92000 Series
>
92000 Diagram
XPress-Pro SW 52000 Series
The XPress-Pro SW 52000 compact, fast Ethernet switches are equipped with 5-port 10/100Base-TX or 4-port
10/100Base-TX plus a fiberoptic interface. By using standard auto-negotiation and the inclusion of auto-MDIX,
Lantronix delivers a cost-effective way of integrating legacy 10 Mbps networks with 100 Mbps fast Ethernet
networks.
SW 52000 TX ports auto-negotiate for 10/100 Mbps speed and auto detect full or half-duplex mode.
The fiber port on the SW 52012F accommodates multimode SC with a fiberoptic connection between two nodes
that can reach up to two kilometers. SW 52000 series switches can be DIN-rail mounted and are equipped with
terminal block power input to accommodate just about any application that requires an Ethernet switch.
2048 MAC addresses
384 kilobit buffer memory
.1A max,12 to 48 VDC power input
-10°to 60°C (14°to 140°F) operating temperature range
Industrial plastic case supports DIN-rail mounting
>
52000 Diagram
XPress-Pro SW 52000 Series
XPress-Pro SW Model: 52000 92000 94000
Designation 100Base-FX
Typical Distance 2 Km
Nominal Wavelength 1310 nm
Cable Type 62.5/125 mm
Connector SC
Optical Budget 15 dB
Serial Interface 5-port 10/100Base-TX or 4-port 10/100Base-TX 8-port 10/100Base-TX 8-port 10/100Base-TX, plus 1-port
Forward and Filtering Rate 14,880 pps for 10 Mbps 148,810 pps for 100 Mbps 14,880 pps for 10 Mbps
Address Table Size 2048 MAC addresses 2048 MAC addresses 4K MAC addresses
Latency Less than 5.1 µs Less than 7.1 µs Less than 9.6 µs
Reverse Polarity Protection n/a n/a Yes
Network Interface 10/100 Mbps full/half-duplex,auto negotiation, 10/100 Mbps full/half-duplex, auto negotiation, 10/100 Mbps full/half-duplex, auto negotiation,
LED Indicators Per Unit:Power Status Per Unit: Power Status (Power 1,Power 2) Per Unit:Power Status (Power 1, Power 2)
Management n/a n/a RS-232 console, Telnet, SNMP V1 & V2, RMON,
Alarm Contact n/a One relay output with current 1A @ 24 VDC One relay output with current 1A @ 24 VDC
Standards IEEE802.3 10Base-T,IEEE802.3u 100 Base-TX/100Base-FX, IEEE802.3x IEEE802.3 10Base-T,IEEE802.3u 100 Base-TX/100Base-FX, IEEE802.3x IEEE802.3 10Base-T,IEEE802.3u 100 Base-TX/100Base-FX
Power Input Voltage:12 to 48 VDC Input Voltage:10 to 48 VDC Input Voltage:10 to 30 VDC
Environmental Operating Temperature:-10° to 60° ° C (-14° to 140° F) Operating Temperature:-34° to 74° ° C (-29° to 165° F) Operating Temperature:-34° to 74° ° C (-29° to 165° F)
Protocols Supported n/a n/a IGMP,GVRP, SNMP V1/V2,RMON, TFTP
Packet Buffer Memory 384 kilobit 768 kilobit 256 KB
Packaging Plastic case with DIN-rail mounting Aluminum case with DIN-rail, or panel mounting Aluminum case with DIN-rail, panel or rack mounting
Dimensions: 25 mm W x 70 mm D x 110 mm H 50 mm W x 110 mm D x 136 mm H 50 mm W x 125 mm D x 135 mm H
Weight: 0.2 Kg (0.44 lbs.) 0.8 Kg (1.76 lb) 0.8 Kg (1.76 lb)
Processing Types Store-and-forward
Standards
Regulatory Approvals:
Emission Compliance FCC Part 15,Class A
ISO Manufactured in an ISO9001 facility
Safety UL 60950 UL 60950, EN 60950,IEC 60950, IEC 61000-6-2,UL 1604: Classified for ITE Equipment for use in hazardous locations:
CE Approval n/a EN55022 (CISPR22 Class A), EN55024 (CISPR24 Class A)
ESD Standards (IEC 61000-4-2) n/a Enclosure Contact:+ / - 4 KV; Criteria B,Enclosure Air: + / - 8 KV; Criteria B
Radiated FRI Standards (IEC 61000-4-3)
Burst Standards (IEC 61000-4-4) n/a Enclosure Ports: + / - 4 KV @ 2.5 KHz;Criteria B, DC Power Ports: + / - 4 KV; Criteria B, AC Power Ports:+ / - 4 KV;Criteria B
Surge Standards (IEC 61000-4-5) n/a Signal Ports: + / - 1 KV; Line-to-earth;Criteria B, DC Power Ports: + / - 0.5 KV;Line-to-earth; Criteria B
Induced RFI Standards (IEC 61000-4-6)
Magnetic Field Standards (IEC 61000-4-8)
Voltage Dip Standards (IEC 61000-4-11)
Environmental Test Compliance n/a (IEC 60068-2-6) Vibration Resistance:5G @ 150 Hz; Criterion 3 (Operation/Storage/Transport)
NEMA TS1/2 Environ. Requirements n/a Yes
for Traffic Control Equipment
Installation Type: DIN Rail (mounting kit is included) DIN Rail (mounting kit is included) DIN Rail (mounting kit is included)
plus 1-port 100Base-FX 100Base-FX (optional)
148,810 pps for 100 Mbps 14,880 pps for 10 Mbps 148,810 pps for 100 Mbps
auto MDI/MDIX auto MDI/MDIX auto MDI/MDIX
Per Port:10/100TX, 100FX: Link/Activity (Green),Speed ( Yellow)
Input Current:0.1A max. Input Current:1.5A max. Input Current:2A max.
Power Consumption:2.4W max. Power Consumption:24 VDC @ 0.55A, 18.48 W max. Power Consumption:24 VDC @ 0.77A, 18.48 W max.
Storage Temperature:-25° to 85° C (-13° to 185° F) Storage Temperature:-40° to 85° C (-40° to 185° F) Storage Tempe rature: -40 ° to 85 ° C (- 40° to 185° F)
Humidity: 10% to 90% relative humidity (non-condensing) Humidity: 10% to 95% relative humidity (non-condensing) Humidity: 10% to 95% relative humidity (non-condensing)
(0.99" W x 2.76" D x 4.33" H) (1.97" W x 4.33" D x 5.35" H) (1.97" W x 4.92" D x 5.31" H)
IEEE802.3 10Base-T,IEEE802.3u 100 Base-TX/100Base-FX, IEEE802.3x
n/a Enclosure Ports:10 V/m, 80 to 1000 MHz;Criteria A
n/a Signal Ports: 10V @ 0.15 - 80 MHz;Criteria A, DC Power Ports: 10V @ 0.15 - 80 MHz;Criteria A
n/a Enclosure Ports: 30 A/m @ 50,60 Hz; Criteria A
n/a AC Power Ports:30% Reduction for 0.5 period; Criteria B
Per Port:10/100TX, 100FX: Link/Activity (Green)
Speed (Yellow),Fault (Red)
Half-duplex back-pressure and IEEE802.3x full-duplex flow control
Class 1, Division 2 group A,B, C & D:Temp Code T4A; -25C° < Tamb < 74C°
AC Power Ports: 10V @ 0.15 - 80 MHz;Criteria A, Earth Ground Ports: 10V @ 0.15 - 80 MHz;Criteria A
Optional wall-mount kit,ordered separately (X9294PMKT-01) Optional wall-mount or rack-mount kit,ordered separately
, Per Port:10/100TX, 100FX: Link/Activity (Green),Speed (Yellow)
Web browser,TFTP
IEEE802.3x, IEEE802.1Q,IEEE802.1p, IEEE802.1w
AC Power Ports: + / - 2 KV;Line-to-earth; Criteria B
(IEC 60068-2-27) Shock:
• 5 G @ 11 ms (Half-Sine Shock Pulse; Operation)
• 50 G @ 11 ms (Half-Sine Shock Pulse; Storage/Transport)
(IEC 60068-2-32) Free Fall:1 M (3.281 ft.)
(X9294DRKT-01), (X9294PMKT-01)
XPress-Pro Industrial Power Supply
Product Description:
30W / 1.5A DIN-rail 24 VDC industrial power supply
Input:
85 to 264 VAC (47 to 63 Hz) or 120 to 370 VDC
Output:
36W, 24 VDC, 0 to 1.5A
Overvoltage Protection:
27.6 to 32.4 Volts
Overload Protection:
105 to 160% rated output power
Protection Type:
Constant current limiting, recovers automatically
Inrush Current:
15A/115 VAC or 30A/230 VAC
Environmental:
Operating Temperature: -20° to 60° C (-4° to 140° F)
Storage Temperature: -40° to 85° C (-40° to 185° F)
Working Humidity: 10% to 95% non-condensing
Storage Humidity: 20% to 90% non-condensing
Dimensions:
78 mm W x 56 mm D x 93 mm H ( 3.17" W x 2.2" D x 3.66" H)
Regulatory Approvals:
Safety: UL60950-1, TUV EN60950-1 approved, design refer to EN50178
EMI conduction & radiation: EN55011, EN55022 (CISPR22) Class B
EMS immunity: EN61000-4-2, 3, 4, 5, 6, 8, 11, ENV50204, EN55024,EN61000-6-2, EN61204-3 heavy industry level, criteria A
Ordering Information
Part Number Description
X52000001-01 XPress-Pro SW 52000; Industrial -10 -60°C 5-Port 10/100TX Ethernet Switch with DIN Rail
X52012011-01 XPress-Pro SW 52012F; Industrial -10 -60°C 4-Port 10/100TX, 1-Port 100BaseFX MM SC Connector Ethernet Switch with DIN Rail
X92000001-01 XPress-Pro SW 92000; hardened -34-74°C 8-Port 10/100TX Ethernet Switch with DIN Rail
X92012011-01 XPress-Pro SW 92012F; hardened -34-74°C 8-Port 10/100TX, 1-Port 100BaseFX MM SC Connector Ethernet Switch with DIN Rail
X94000001-01 XPress-Pro SW 94000; hardened manageable -34-74°C 8-Port 10/100TX Ethernet Switch with DIN Rail
X94012011-01 XPress-Pro SW 94012F; hardened manageable -34-74°C 8-Port 10/100TX, 1-Port 100BaseFX MM SC Connector Ethernet Switch with DIN Rail
X3024DR00-01 30 Watts 24VDC output,hardened DIN Rail power supply
Accessories:
X9294DRKT-01 19" Rack Mount Kit for 94000 series
X9294PMKT-01 Wall Mount Kit for 92000,94000 series
15353 Barranca Parkway | Irvine | CA 92618 | USA | Tel: 800.422.7055 | Fax: 949.450.7232 | www.lantronix.com
©2007, Lantronix, Inc. Lantronix is a registered trademark and XPress-Pro and DeviceLinx are trademarks of Lantronix, Inc. All other trademarks are the property of their respective owners.
Specifications subject to change without notice. All rights reserved. 910-524 01/08 PDF
Loading...