Lantronix XPP1004000-02R, XPP1002000-01R, XPP100200S-01R, XPP1002000-02R, XPP100200S-02R Integration Manual

xPort Pro

Embedded Device Server

Integration Guide

Part Number 900-557

Revision J August 2017

Copyright and Trademark

© 2017 Lantronix, Inc. All rights reserved. No part of the contents of this publication
may be transmitted or reproduced in any form or by any means without the written
permission of Lantronix.

Lantronix and xPort are registered trademarks of Lantronix, Inc. in the United States
and other countries. Evolution OS is registered trademark of Lantronix, Inc. in the
United States. DeviceInstaller is a trademark of Lantronix, Inc.

Windows and Internet Explorer are registered trademarks of Microsoft Corporation.
Mozilla and Firefox are registered trademarks of the Mozilla Foundation. Chrome is a

trademark of Google. Opera is a trademark of Opera Software ASA. Freescale is a
registered trademark of Freescale Semiconductor, Inc. Broadcom is a registered
trademark of Broadcom Corporation. All other trademarks and trade names are the
property of their respective holders.

Warranty

For details on the Lantronix warranty policy, please go to our Web site at

www.lantronix.com/support/warranty

Contacts

Lantronix, Inc. Corporate Headquarters

.

7535 Irvine Center Drive
Suite 100
Irvine, CA 92618, USA

Toll Free: 800-526-8766
Phone: [phone]
Fax: [phone]

Technical Support

Online: www.lantronix.com/support

Sales Offices

For a current list of our domestic and international sales offices, go to the Lantronix
web site at www.lantronix.com/about/contact

Disclaimer and Revisions

Operation of this equipment in a residential area is likely to cause interference, in
which case the user, at his or her own expense, will be required to take whatever
measures may be required to correct the interference.

Note: This product has been designed to comply with the limits for a Class B digital

device pursuant to Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy, and if not
installed and used in accordance with this guide, may cause harmful interference to
radio communications.

.

Changes or modifications to this device not explicitly approved by Lantronix will void
the user's authority to operate this device.

Note: With the purchase of Lantronix® xPort® Pro embedded device server, the

OEM agrees to an OEM firmware license agreement that grants the OEM a non­exclusive, royalty-free firmware license to use and distribute the binary firmware

xPort® Pro Embedded Device Server Integration Guide 2

image provided, only to the extent necessary to use the xPort Pro hardware. For

Date

Rev.

Comments

September 2009

A

Initial Draft

December 2010

B

Updated Lantronix address/contact information.

March 2011

C

Updated SDRAM number information.

April 2011

D

Updated part number information.

September 2011

E

Updated compliance information.

April 2012

F

Updated Pin 4 state and part number information.

August 2012

G

Updated recommended operating condition and part number
information.

June 2016

H

Updated to include the xPort Pro Lx6 part number and unit of
measurement information.

August 2017

J

Updated part number SKU information.

further details, please see the xPort Pro OEM firmware license agreement.

Revision History

xPort® Pro Embedded Device Server Integration Guide 3

Table of Contents

Copyright and Trademark ______________________________________________ 2
Disclaimer and Revisions ______________________________________________ 2
Revision History _____________________________________________________ 3
List of Figures _______________________________________________________ 5
List of Tables _______________________________________________________ 5

1. Introduction 6

About the Integration Guide ____________________________________________ 6
Additional Documentation______________________________________________ 6

2. Description and Specifications 7

The xPort Pro Features _______________________________________________ 7
xPort Pro Block Diagram ______________________________________________ 8
PCB Interface _______________________________________________________ 9
Ethernet Interface ___________________________________________________ 10
LEDs _____________________________________________________________ 10
Dimensions ________________________________________________________ 11
Recommended PCB Layout ___________________________________________ 12
Product Information Label ____________________________________________ 13
Electrical Specifications ______________________________________________ 13
Functional Specifications _____________________________________________ 14

A: xPort Pro 485 Connection Diagram 16

B: Compliance Information 17

RoHS, REACH and WEEE Compliance Statement _________________________ 17

xPort® Pro Embedded Device Server Integration Guide 4

List of Figures

Figure 2-1. Side View of the xPort Pro ____________________________________ 8

Figure 2-2. xPort Pro Block Diagram _____________________________________ 8
Figure 2-3. xPort Pro LEDs ___________________________________________ 10

Figure 2-4. Front View _______________________________________________ 11

Figure 2-5. Bottom View ______________________________________________ 11

Figure 2-6. Side View ________________________________________________ 11

Figure 2-7. PCB Layout ______________________________________________ 12

Figure 2-8. Product Label _____________________________________________ 13

List of Tables

Table 2-1 xPort Pro Part Numbers ______________________________________ 7
Table 2-2 PCB Interface Signals ________________________________________ 9
Table 2-3 Ethernet Interface Signals (Industry Standards) ___________________ 10
Table 2-4 Absolute Maximum Ratings __________________________________ 13
Table 2-5 Recommended Operating Conditions ___________________________ 13
Table 2-6 Technical Specifications _____________________________________ 14

xPort® Pro Embedded Device Server Integration Guide 5

Document

Description

1. Introduction

About the Integration Guide

This guide provides the information needed to integrate the Lantronix Port® Pro
embedded device server into a customer printed circuit board. This manual is
intended for engineers responsible for integrating the xPort Pro into their product.

Note: This document covers xPort Pro Embedded Device Server versions

XPP1004000-02R, XPP1002000-01R, XPP100200S-01R, XPP1002000-02R,
XPP100200S-02R, XPP1003000-01R, XPP100300S-01R, XPP1003000-04R and
XPP100300S-04R.

Additional Documentation

Visit the Lantronix web site at www.lantronix.com/support/documentation for the
latest documentation and the following additional documentation.

xPort Pro Embedded
Device Server User Guide

xPort Pro Lx6 Embedded
Device Server User Guide

xPort Embedded Device
Server Universal Demo
Board Quick Start

xPort Embedded Device
Server Universal Demo
Board User Guide

DeviceInstaller User
Guide

Com Port Redirector User
Guide

Provides information needed to configure, use,
and update the xPort Pro firmware.

Provides information needed to configure, use,
and update the xPort Pro Lx6 firmware.

Provides the steps for getting the xPort Pro up
and running.

Provides information needed to use the xPort Pro
on the demo board.

Provides instructions for using the Windows­based utility to configure the xPort Pro and other
Lantronix device servers.

Provides information on using the Windows­based utility to create a virtual com port.

xPort® Pro Embedded Device Server Integration Guide 6