Lantech IPES-0005B Series, IES-0005B, IPES-0008B Series, IES-0008B User Manual

IPES/IES-0005B/0008B Series

5/8 10/100TX (w/8/5 PoE at/af) Industrial Un-Managed Switch

User Manual

Aug. 2016

Recommendation for Shielded network cables

STP cables have additional shielding material that is used to reduce external interference.
The shield also reduces the emission at any point in the path of the cable. Our
recommendation is to deploy an STP network cable in demanding electrical environments.
Examples of demanding indoor environments are where the network cable is located in
parallel with electrical mains supply cables or where large inductive loads such as motors
or contactors are in close vicinity to the camera or its cable. It is also mandatory to use an
STP cable where the power device (like IP camera) is used outdoors or where the network
cable is routed outdoors.

Important Notice

Lantech Communications Global, Inc. reserves the right to modify the
equipment, its specification or this manual without prior notice, in the interest
of improving performance, reliability, or servicing. At the time of publication
all data is correct for the operation of the equipment at the voltage and/or
temperature referred to. Performance data indicates typical values related to
the particular product.

No part of this documentation or information supplied may be divulged to any
third party without the express written consent of Lantech Communications
Global Inc. Products offered may contain software which is proprietary to
Lantech Communications Global Inc. The offer or supply of these products
and services does not include or infer any transfer of ownership.

Interference Issues

This Equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
commercial or industrial installation. This equipment generates, uses, and
can radiate radio frequency energy. It may cause harmful interference to
radio communications if the equipment is not installed and used in
accordance with the instructions.

FCC Warning

This Equipment has been tested and found to comply with the limits for a
Class-A digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy. It may cause harmful interference to radio
communications if the equipment is not installed and used in accordance
with the instructions. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

 Consult the dealer or an experienced radio/TV technician for help.

CE Mark Warning

This is a Class-A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take
adequate measures.

Content

Chapter 1 Introduction ............................................. 5

Specification ............................................................. 5

Chapter 2 Hardware Description ............................ 7

2.1 Physical Dimension ........................................ 7

2.2 Package Content:........................................... 8

2.3 IP Protection ................................................... 9

2.4 LED Indicators.............................................. 12

Chapter 3 Hardware Installation ........................... 13

5

Chapter 1 Introduction

Lantech IPES/IES-0005B/0008B Series is a high performance IP41 industrial switch with
8/5 x10/100TX (w/8/5 PoE at/af injectors - IPES model) by M12 connectors which
provides L2 wire speed and advanced security function for connecting PD network.

Specification

For latest product specifications, please refer to Lantech official site.

IES/IPES-0005B series

Hardware Specification

IEEE
Standard

IEEE802.3 10BASE-T Ethernet
IEEE802.3u 100BASE-T Ethernet
IEEE802.3x Flow Control and Back Pressure
IEEE802.3at/af Power over Ethernet

Transfer
Rate

14,880pps for Ethernet port
148,800pps for Fast Ethernet port

Mac
Address

8K MAC address table

Connector

10/100T: 5 x M12, 4-pole D-coded, Female with auto MDI/MDI-X function
Power connector: 1 x M12, 5-pole A-coded, Male

Protocol

CSMA/CD

LED

Per unit: Power 1 (Green), Power 2 (Green),
Ethernet: Link/Activity (Green)

PoE Pin
Assignme
nt

RJ-45 port # 1~#5 support IEEE 802.3af/at End-point, Alternative A mode. Per port provides 15.4W/30W ability.
Positive (VCC+): RJ-45 pin 1,2.
Negative (VCC-): RJ-45 pin 3,6.

Power
Supply

Dual input

9.5~56VDC for PoE feeding (12V model)

50.4~90VDC for PoE feeding (72V model)

Power
Consumpti
on

10W for 12/24/48VDC

13.5W for 72V

Power
Budget

80W for 12V input
120W for 24V input

80W for 72V Input

Operating
Humidity

5% to 95% (Non-condensing)

Operating
Temperatu
re

-40°C ~ 75°C (-40°F ~ 167°F)

Storage
Temperatu
re

-40°C ~ 85°C (-40°F ~ 185°F)

Case
Dimension

Aluminum case, IP-41
135mm(W)x165mm(H)x62mm(D)

Weight

700g

Installation

Din Rail**, Wall Mount Design

EMC

FCC Class A,
CE EN61000-4-2 (ESD),
CE EN61000-4-3 (RS),
CE EN-61000-4-4 (EFT),
CE EN61000-4-5 (Surge),
CE EN61000-4-6 (CS),
CE EN61000-4-8 (Magnetic Field),
CE EN61000-6-2,