
Industrial Entry Switches
IIIIEEEESSSS----0005T
0005T
0005T0005T
5-Port 10/100TX Slim Type Industrial Switch
(Relay Contact with Alarm System)
DNV Type Approval for Ships, Craft and Off-shore Platforms
UL Class I Division II for Group A,B,C and D hazardous location
Wide-range redundant power with polarity reverse protection
Provides surge & ESD protection
OVERVIEW
OVERVIEW
OVERVIEWOVERVIEW
The Lantech IES-0005T is a slim type 5-Port 10/100TX
Industrial Switch. It is able to use AC power adapter with wide
DC input range and can be installed easily with DIN rail or wall
mount kit.
The IES-0005T is designed to meet the demands of industrial
environments, comes packaged in a robust IP 30 housing and
has been tested extensively to meet Industrial EMI and EMC
standards. With UL Class I Division II approval, the IES-0005T
can be implemented in hazardous or explosive condition without
accelerating the potential damage. The ESD, surge, and power
polarity reverse protections, making IES-0005T work well
without interruption.
The Lantech IES-0005T is the best to use in Industrial
automation, Transportation, Semi-conductor factory, Heavy
Industrial factory and other factory assembly lines. Furthermore,
UL Class I Division II safety certification makes IES-0005T your
best choice to be installed in inflammable environment where
the liquid, gas and vapor etc might present the hazardous
condition which generally to be find in mining, oil & gas,
chemical, processing automation areas.
Lantech DNV-Type Approval IES-0005T-DNV model meets with
the most critical test criteria in DNV Type test directives
consisting of MED (Marine Equipment Directive), EMC
(Electromagnetic Compatibility Directive) and LVD (Low Voltage
Directive) in which vibration, high voltage, compass safe
distance, salt mist tests, humidity etc are conducted to ensure
the switch sustaining the harsh on-board environments often
founded in Ships, Crafts and Offshore platforms.
FEATURES
FEATURES & BENEFITS
FEATURESFEATURES
5-port 10/100TX Slim Type industrial switch
Conforms to IEEE 802.3 10Base-T, 802.3u
100Base-TX/100Base-FX
802.3u 100Base-TX/100Base-FX
Flow control on full-duplex
Back pressure on half-duplex
RJ-45 port support auto MDI/MDI-X Function
Store-and-forward switching architecture
Wide-range redundant power design
& BENEFITS
& BENEFITS & BENEFITS
Power polarity reverse function to work under wrong
Relay alarm output for system events
DIN rail and wall mount design
UL Class I Division II for Group A,B,C and D hazardous
Provides surge protection 3000 VDC for power line
Supports 6000 VDC Ethernet ESD protection
DIMENSION
DIMENSIONSSSS
DIMENSIONDIMENSION
(unit=mm)
(unit=mm)
(unit=mm) (unit=mm)
polarity power connection
location
Datasheet Version 1.0
www.lantechcom.eu | info@lantechcom.eu

Industrial Entry Switches
SPECIFICATION
SPECIFICATION
SPECIFICATIONSPECIFICATION
Hardware Specification
Standards IEEE 802.3 10Base-T Ethernet
Switch Architecture Back-plane (Switching Fabric): 1.0Gbps
Transfer Rate 14,880pps for Ethernet port
Memory Buffer 384Kbits(IES-0005T), 448Kbits(IES-0005T/E)
Packet Buffer 1Mbits
Mac Address 2K MAC address table
Connectors 10/100TX: 5 x RJ-45 with auto MDI/MDI-X function
Network Cable 10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable
Protocol CSMA/CD
LED Per unit:
Operating Humidity 5% ~ 95% (Non-condensing)
Operating
Temperature
Storage
Temperature
Reserve polarity
protection
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE802.3x Flow Control and Back-pressure
Packet throughput ability (Full-Duplex):
2.38Mpps @64bytes
148,800pps for Fast Ethernet port
EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5 cable
EIA/TIA-568 100-ohm (100m)
Power 1 (Green),
Power 2 (Green),
Fault (Red)
Per port:
Link/Active (Green),
Full duplex/Collision (Yellow)
-20°C~60°C / -4°F~140°F (Standard model)
-40°C~75°C / -40°F~167°F (-E model)
-40°C~85°C / -40°F~185°F
Present
Overload current
protection
Power Supply 24VDC (9~48VDC), 18VAC (12~36VAC),Redundant
Power
Consumption
Case Dimension Metal case. IP-30, 30 (W) x 95 (D) x 140 (H) mm
Weight 1349 g
EMI & EMS FCC Class A,
Safety UL, cUL, CE/EN60950-1
Stability Testing IEC60068-2-32 (Free fall)
MTBF 412590 hrs
Installation DIN Rail and Wall Mount Design
Warranty 5 years
Present
power with polarity reverse protect function and
removable terminal block
2.93 Watts
CE EN61000-4-2 (ESD),
CE EN61000-4-3 (RS),
CE EN61000-4-4 (EFT),
CE EN61000-4-5 (Surge),
CE EN61000-4-6 (CS),
CE EN61000-4-8,
CE EN61000-4-11,
CE EN61000-4-12,
CE EN61000-6-2,
CE EN61000-6-4
UL Class I Division II for Group A,B,C and D
hazardous location
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)
ORDERING INFOMATION
ORDERING INFOMATION
ORDERING INFOMATIONORDERING INFOMATION
IES-0005T…………....….….......P/N: 8350-630
5 10/100TX Industrial Switch, Standard Operating Temperature (-20°C~60°C)
IES-0005T-E………...….............P/N: 8350-632
5 10/100TX Industrial Switch, Wide Operating Temperature (-40°C~75°C)
IES-0005T-DNV..…....….….......P/N: 8350-630DNV
5 10/100TX Industrial Switch, Standard Operating Temperature (-20°C~60°C); DNV Type Approved
OPTIONAL ACCESSORIES
OPTIONAL ACCESSORIES
OPTIONAL ACCESSORIESOPTIONAL ACCESSORIES
DIN Rail Power
AD1048-24FS
AD1024-24F
AD1240-48S
AD1120-48F
24VDC, 2A, Wide AC Input, Convection Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
24VDC, 1A, Wide AC Input, Convection Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
48VDC, 5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
48VDC, 2.5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C ~50°C
Lantech Communications Europe GmbH
www.lantechcom.eu / www.lantechcom.tw
The revise authority rights of product specifications belong to Lantech Communications Global Inc.
Lantech may make changes to specification and product descriptions at anytime, without notice.
© 2009 Copyright Lantech Communications Global Inc. all rights reserved.
info@lantechcom.eu
Datasheet Version 1.0
www.lantechcom.eu | info@lantechcom.eu