LANPARTY nF3 Ultra-D User Guide
System Board User’s Manual
Carte Mère Manuel Pour Utilisateur
System-Platine Benutzerhandbuch
Manual del Usuario de Placas Base
Руководство ПользователяРуководство Пользователя
Руководство Пользователя
Руководство ПользователяРуководство Пользователя
935-NF3UD1-000
85010532
1
Quick Setup
Quick Setup Guide
Copyright
This publication contains information that is protected by copyright. No part of it
may be reproduced in any form or by any means or used to make any
transformation/adaptation without the prior written permission from the copyright
holders. This publication is provided for informational purposes only. The
manufacturer makes no representations or warranties with respect to the
Guide
contents or use of this manual and specifically disclaims any express or implied
warranties of merchantability or fitness for any particular purpose. The user will
assume the entire risk of the use or the results of the use of this document.
Further, the manufacturer reserves the right to revise this publication and make
changes to its contents at any time, without obligation to notify any person or
entity of such revisions or changes. © 2005. All Rights Reserved.
Trademarks
Product names or trademarks appearing in this manual are for identification
purpose only and are the properties of the respective owners.
Caution
To avoid damage to the system, use the correct AC input voltage range
To reduce the risk of electric shock, unplug the power cord before removing the
system chassis cover for installation or servicing. After installation or servicing,
cover the system chassis before plugging the power cord.
Battery: 1. Danger of explosion if battery incorrectly replaced. 2. Replace only
with the same or equivalent type recommend
used batteries according to the battery manufacturer’s
Notice
The system board and accessories in the package may not come similar to the
information stated in this manual. This may differ in accordance to the sales region
or models in which it was sold. For more information about the standard
package in your region, please contact your dealer or sales representative.
FCC and DOC Statement on Class B
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference when the
equipment is operated in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to
• Consult the dealer or an experienced radio TV technician for help.
Notice:
1. The changes or modifications not expressly approved by the party
2. Shielded interface cables must be used in order to comply with the emission
..
.
..
by the manufacturer. 3. Dispose of
instructions.
which the receiver is connected.
responsible for compliance could void the user's authority to operate the
equipment.
limits.
2
Table of Contents
Quick Setup Guide
1
Chapter 1
Quick Setup Guide.............................................
Chapter 2
English......................................................................
Chapter 3
Français....................................................................
Chapter 4
Deutsch...............................................................................
Chapter 5
Español............................................................................
Chapter 6
Русский.......................................................................
16
20
23
27
31
4
Guide
Quick Setup
The user’s manual in the provided CD contains detailed information about the system board. If, in some
cases, some information doesn’t match those shown in this manual, this manual should always be regarded as the most updated version.
Le manuel d’utilisateur dans le CD muni contient renseignement détaillé au sujet de carte de système. Si,
en quelque cas, quelque renseignement n’appareille de ce que dit dans ce manuel, ce manuel doit
toujours être considéré comme la plus nouvelle version.
Das Benutzerhandbuch in der angebotenen CD enthält detaillierte Informationen über die Hauptplatine.
Wenn in manchen Fällen manche Informationen nicht denjenigen Informationen dargestellt in diesem
Handbuch entsprechen, soll dieses Handbuch als die meist aktualisierte Ausgabe gelten.
El uso explicativo contene información detalle sobre la sistema board en el CD preparativo. Si en algún
caso, la información no es igual con el uso explicativo, necesita ver el uso explicativo, esque es más
nuevo.
В руководстве пользователя на предоставляемом CD диске содержится подробная
информация о материнской плате. Иногда напечатанное руководство может не
совпадать руководством на CD, так как последнее наиболее часто обновляется и
является самым свежим.
3
1
Quick Setup Guide
Chapter 1 - Quick Setup Guide
System Board Layout
Guide
Quick Setup
4
System Memory
Quick Setup Guide
DDR 4 Channel B
DDR 2 Channel A
DDR 3 Channel B
DDR 1 Channel A
1
Guide
Quick Setup
Single Channel
Dual Channel
Important:
If you are installing more than one double rank DDR400, the
maximum DRAM speed will automatically be limited to the speed of
a DDR333. However, the BIOS provides the option of manually
adjusting the speed to DDR400 by selecting “200” in the “Max
Memclock (Mhz)” field (Genie BIOS Setting submenu, DRAM
Configuration section) of the BIOS.
• DIMMs are on the same channel.
• DIMMs in a channel can be identical or
completely different. However, we highly
recommend using identical DIMMs.
• Not all slots need to be populated.
• DIMMs of the same memory configura-
tion are on different channels.
5
1
Quick Setup Guide
Jumpers
Clear CMOS Data
Guide
Quick Setup
BIOS Write Protect
JP2
1-2 On: Normal
X
(default)
312312
2-3 On:
Clear CMOS Data
12
Off:
BIOS Not Write
Protected
J13
BIOS Write
X
Protected
12
On:
6
Rear Panel I/O Ports
Quick Setup Guide
1
PS/2
Mouse
PS/2
K/B
Parallel
S/PDIF-out
I/O Connectors
S/PDIF
S/PDIF-in
S/PDIF-out
SPDIF out
Key
GND
+5V
15
SPDIF in
COMS/PDIF-in
W
W
1394_1
USB 1-2 USB 3-4
J3
LAN
Line-in
Line-out
Mic-in
Guide
Quick Setup
Note:
DO NOT use RCA S/PDIF and optical S/PDIF at the same time.
7
1
Guide
Quick Setup Guide
IEEE 1394
Quick Setup
+12V (fused)
Universal Serial Bus Ports
USB 2
USB 1
USB 4
USB 3
1394_1
10 9
Ground
TPB- TPB+
Ground
TPA-
1394_2
W
W
W
Key
+12V (fused)
Ground
TPA+
12
W
X
N. C.
Ground
+Data
VCC
-Data
2
1
10
9
USB 5-6
VCC
USB 7-8
-Data
+Data
Key
Ground
8
Audio (Rear Audio and Front Audio)
Quick Setup Guide
1
Front audio
Light Blue
Lime
Pink
Line-in
Line-out
Mic-in
2
1
Rear audio
AuD_Vcc
AuD_R_Return
GND
Key
Mic
Mic Power
AuD_R_Out
2-channel
Line-in
Line-out
Mic-in
W
AuD_L_Return
10
W
9
N. C.
AuD_L_Out
4-channel
Rear R/L
Front R/L
Mic-in
Guide
Quick Setup
6-channel
Rear R/L
Front R/L
Center/Subwoofer
9
1
Quick Setup Guide
DRAM Power LED and Standby Power LED
Guide
Quick Setup
DRAM Power LED
Standby Power LED
Important:
When the DRAM Power LED lit red, it indicates that power is
present on the DDR sockets. Power-off the PC then unplug the
power cord prior to installing any memory modules. Failure to do so
will cause severe damage to the motherboard and components.
10
Floppy Disk Drive Connector
34
X
33
21
Quick Setup Guide
Serial ATA Connectors
SATA 4 (J11)
SATA 3 (J10)
7
SATA 1 (J21)
SATA 2 (J20)
Important:
Before creating RAID, make sure you have installed the Serial/Parallel
ATA drives and connected the data cables otherwise you won’t be
able to enter the NVIDIA RAID BIOS utility.
IDE Disk Drive Connector
RXP
GND
RXN
GND
TXP
TXN
1
Guide
Quick Setup
1
GND
SEC IDE
PRI IDE
40
39
21
SEC IDE
40
39
21
PRI IDE
11
Loading...