Lanner electronic FW-7870 User Manual

FW-7870 Series

19” 1U Intel Pentium 4 Socket T Rackmount

Network Security Platform

User’s Manual

Copyright and Disclaimers

© Copyright 2004 - Lanner Electronics Inc.
All Rights Reserved

The contents in this publication have been thoroughly checked and considered accurate. The
publisher and manufacturer of this product, Lanner Electronics, is not responsible for any
violation of patents or other rights of third parties resulting from its use. Neither does Lanner
Electronics assume any responsibility for any inaccuracies contained in this manual, nor make
any commitment to keep the information in this document up-to-date.

Lanner reserves the right to make improvements to this document and/or this product at any
given time without notice.

No part of this document may be reproduced, stored in a retrieval system, or transmitted in any
form or by any means (electronic, mechanical, photocopying, recording, or otherwise, without
the formal consent from Lanner.

Trademark Acknowledgments

All products and/or brand names stated in this publication are the trademarks of their rightful
and associated companies.

Radio Frequency Emissions Notice

This equipment has been tested and found to comply with the digital device limits pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when operate in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area may cause harmful interference, in which case the user will
be required to correct the interference at his expense.

ii

Safety Instructions

The following information relates to the safety of installation and maintenance personnel. Read
all instructions before attempting to unpack, install or operate this equipment, especially before
connecting the power adapter.

Please keep the following in mind as you unpack and install this equipment:

 Always follow basic safety precautions to reduce the risk of fire, electrical shock and

injury to persons.

 Do not apply power into FW-7870 before installation or when disconnecting this

product from its original system setup.

 To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this

product near water.

 Locate a safe and dry location to place this product. Keep it away from wet

surfaces/surroundings.

 Never push an object of any kind into this product through openings or empty slots, as

you may damage parts.

 Do not attach the power supply cabling to building surfaces. Do not allow anything to

rest on the power cabling or allow it to be abused by persons walking on it.

 Distance your working area from moist floors, ungrounded power extension cables, and

unavailable safety grounds.

 Avoid installation of this product during a lighting storm.
 Damages caused by electrostatic discharge may result in total or intermittent system

failures. To minimize the possibility of ESD damage, an anti-static strap is highly
recommended.

 When cleaning or servicing this unit, avoid using highly toxic or aerosol cleaners. Use a

clean damp cloth when wiping its surfaces.

 Do not place this device in a tight and sealed location. Place the unit where it can access

sufficient airflow to its vent holes (openings along its sides). Never block or cover these
openings.

 Do not disassemble this product on your own.

iii

Getting Technical Assistance

Should you encounter questions or problems with your FW-7870, Lanner Electronics is ready
to assist you within the guidelines of our product support programs. First, check the electronic
product documentation for assistance. If you still cannot find the solution to your problem,
contact Lanner sales team with the following information handy:

 FW-7870 model name
 Part number
 Local network configuration details
 The abnormal behavior and/or error messages reported by your network system
 Your questions, or a description of the problem you are experiencing

Call, fax, or e-mail Lanner Electronics for technical support.

Phone: [phone]

Fax: [phone]

E-mail: [e-mail]

About this Manual

This target audience of this manual includes users, administrators and technicians. This
publication is a useful reference when installing, configuring, operating and managing the
FW-7870. This breakdown and short descriptions of this manual’s contents are as follows:

 Chapter 1 – Introduction provides an overview of the FW-7870 19” 1U

Rackmount network security appliance, including its related features,
application usage and technical specifications list. The chapter also
guides users through the pre and post installation process by listing safety
tips plus an overall detailed description of the control board and system
and their vital components.

 Chapter 2 – Introduce Hardware Installation
 Chapter 3 – Award BIOS Setup
 Appendix A –summarizes the specification of the power supply
 Appendix B –Watchdog Timer Introduction
 Appendix C –Console Redirection
 Appendix D– LCD Module and Key Pad

iv

Table of Contents

Copyright and Disclaimers....................................................................................................ii

Trademark Acknowledgments...............................................................................................ii

Radio Frequency Emissions Notice..................................................................... ii

Safety Instructions............................................................................................... iii

Getting Technical Assistance.............................................................................. iv

About this Manual................................................................................................ iv

Table of Contents................................................................................................ v

C h a p t e r 1.........................................................................................................................1

Getting Started 1

1.1 Introduction.................................................................................................. 1

1.1.1 Features...............................................................................................................................1

1.2 Technical Specifications.............................................................................. 2

1.3 Packing Contents........................................................................................ 3

1.4 MB-X76 System Board................................................................................4

1.4.1 Board Layout........................................................................................................................4

1.4.2 Jumper Settings and I/O Connector.....................................................................................5

1.4.3 Connector Pin Assignments.................................................................................................5

CMOS1:Clear CMOS Data ............................................................................... 5

CMOS1:Clear CMOS Data ............................................................................... 5

PS4M1:4 Pin Power Connectr.......................................................................... 5

PS8P1:8-Pin Power Connector (Xeon-8P Male ) .............................................. 5

PSC1:24 Pin ATX Power Connector ................................................................. 6

COMA1: RS-232 Serial Port #1 Connector (D-Sub) ........................................ 6

FAN1-5 : 3 Pin FAN Connector) ...................................................................... 6

PLRS1:Power LED,HD LED,Reset,Speaker Connector(11 Pin 2.54mm) ........ 6

PSW1:For ATX Power Button........................................................................... 6

KPA1：LCM Keypad ....................................................................................... 6

IRDA1:IRDA1 Connector)............................................................................... 6

PKMB1: PS/2 Keyboard & Mouse Connector (2x4 Header 2.54mm )............. 6

IDEB1 : IDE Interface Connector ( 40Pin 2.54mm Pitch Header )................... 7

LANB1-8 :Type 2( RJ-45 with LED ) ............................................................... 7

PCIB1:124-pin Mini PCI Sockets ..................................................................... 7

1.5 FW-7870 19” 1U Rackmount Firewall Mechanisms.................................... 8

1.5.1 Face Panel...........................................................................................................................8

1.5.3 Rear View.............................................................................................................................10

C h a p t e r 2.......................................................................................................................11

FW-7870 Hardware Installation Guide..............................................................................11

2.1 Hardware Installation Guide........................................................................ 11

Chapter 3..............................................................................................................................17

Award BIOS Setup..............................................................................................................17

3.1 BIOS Setup ................................................................................................. 17

Starting Setup....................................................................................................................................17

Using Setup.......................................................................................................................................17

Navigating through the menu bar......................................................................................................18

Getting Help.......................................................................................................................................18

3.2 Main Menu.................................................................................................... 19

3.3 Standard CMOS Features........................................................................... 20

3.4 Advanced BIOS Features............................................................................ 22

v

3.5 Advanced Chipset Features........................................................................ 24

3.6 Integrated Peripherals................................................................................. 26

3.7 Power Management Setup.......................................................................... 30

3.8 PnP/PCI Configuration ................................................................................ 32

3.9 PC Health Status......................................................................................... 33

3.10 Frequency / Voltage Control ...................................................................... 34

CPU Clock Ratio : This item allows you to select the CPU Host / PCI Clock...... 34

3.11 Load Optimized Defaults........................................................................... 34

3.12 Supervisor/User Password Setting............................................................ 34

3.13 Save and Exit Setup.................................................................................. 35

3.14 Exit Without Saving .................................................................................... 37

Appendix A...........................................................................................................................38

Appendix B ..........................................................................................................................39

Appendix C ........................................................................................................................386

Appendix D..........................................................................................................................48

Terms and Conditions 41
Warranty Policy 44
RMA Service 44

vi

1.1 Introduction

C h a p t e r 1

Getting Started

The FW-7870 is a 1U rackmount network security solution targeting the Enterprise market.
The FW-7870 supports Socket T for Intel Pentium 4 processor with 533/800 MHz FSB. It is
designed with an Intel 915GV as its northbridge and ICH6(i82801FB) as its southbridge.; All
Gigabit ports to be connected from the Southbridge through the ICH6(i82801FB) hub
controller’s PCI-express and PCI ports, ensuring maximum throughput and performance. For
extra flexibility and scalability, the FW-7870 has a Mini PCI slot, users can expand their
specifications and performance by simply adding add-on cards to the slot. FW-7870 has two
built-in DDR SDRAM DIMM sockets onboard, enough for even the most intensive network
security applications. The FW-7870 is a powerful and flexible unit that can meet the vast and
various hardware requirement and performance needs of System Integrators, OEM customers
and software developers.

1.1.1 Features

Listed below are the key features of FW-7870.

 Supports 3.5” SATA HDD
 Supports Socket T(LGA775) for Intel Pentium 4 processor. Up to 3.6 GHz.
 Supports two DDR DIMM socket (184-pin) up to 2GB DDR SDRAM.

Figure 1 – FW-7870 Outlook

 Supports 4 Gigabit Ethernet ports by PCI-express interface with Marvell 8053,

with 4 Gigabit Ethernet ports by PCI interface with Marvell 8001.

 Supports Compact Flash, Mini PCI.
 Support Serial(RS-232), USB 2.0 on front panel.
 19” 1U Rackmount network security appliance

1

1.2 Technical Specifications

Model Name FW-7870

SBC
SBC
CPU

Chipset

BIOS

Memory

Network interface

SSD

I/O Interface

Expansion Slot

RTC

Power

Form Factor

Operating Temperature

Storage Temperature

MB-X76A

Socket T(LGA 775) for Intel Pentium 4 Processor

Intel 915GV/Intel i82801FB

Award BIOS

Two 184 pin DDR DIMM

4 ports PCI-E by Marvell 8053 Gigabit Ethernet

4 ports PCI by Marvell 8001 Gigabit Ethernet

one CompactFlash TypeII Socket

One DB-9 RS-232 connector(Front panel)

One USB 2.0 connector (Front panel)

One Mini-PCI slot

One PCI extension slot in back panel

Internal RTC with LI battery

1U Power Supply with input Voltage : 100VAC-240VAC

and Frequency :47Hz-63Hz

Mechanical/ Environmental

19” 1U Rackmount

o

0

C – 40 oC

o

-20

C – 70 oC

Humidity

Chassis Material

Dimension

Net Weight

Certification

Software support

Linux 6.5 and above, Windows 2000/2003/ XP

5% - 95% RH, non-condersing

Steel

mm

KGS

CE, FCC CLASS A

2

1.3 Packing Contents

Carefully unpack your package and make sure that you have the following items.

 FW-7870 Network security Platform
 Console cable
 1.8 meters long cross-over Ethernet cable
 1.8 meters long straight-through Ethernet cable
 Power cable
 Screw Set
 CPU Cooler * 1
 Slid & Bracket Set

If you find anything missing or damaged, promptly contact your dealer for assistance.

3

1.4 MB-X76 System Board

MB-X76 is the system board bundled with the FW-7870 Network security platform. The
succeeding sections list all MB-X76 related jumper settings and connector pin assignments.

1.4.1 Board Layout

Figure 3 – MB-X76 Jumpers and Connectors

4

1.4.2 Jumper Settings and I/O Connector

The onboard jumper settings and I/O connector of MB-X76 are custom-tailored to fit the
FW-7870 functionality. Changing the jumper settings may result in system malfunction or
unforeseen damages.

Jumper Settings and I/O Connector Summary for MB-X76

JUMPER FUNCTION

CMOS1 Clear CMOS Data

PKMB1 PS/2 keyboard & mouse connector

USBF1 USB port 1 & port 2 connector

CRT1 VGA connector

PSP1 4 pin power connector

FAN1, 2, 3

LUSBCOM1

PSC1

FDCA1

1.4.3 Connector Pin Assignments

CMOS1:Clear CMOS Data

CMOS1 Description

1-2 Normal (Default)

2-3 Clear CMOS

PS4P1:4-Pin Power Connector (P4-4P Male )

Pin No. Description

1
2

3
4

GND

GND

+12V

+12V

5

PSC1:24 Pin ATX Power Connector

Pin No. Description Pin No. Description

1
2
3
4
5
6
7
8

9
10
11
12

+3.3V

+3.3V

Ground

+5V

Ground

+5V

Ground

Power Good

Stand-By 5V

+12V

+12V

+3.3V

13
14
15
16
17
18
19
20
21
22
23
24

+3.3V

-12V

Ground

PSON-

Ground

Ground

Ground

NC

+5V

+5V

+5V

Ground

FAN1-3 : 3 Pin FAN Connector)

Pin No. Description

1
2
3

Ground

+12V

FAN Sta tus

PKMB1: PS/2 Keyboard & Mouse Connector (2x4 Header 2.54mm )

Pin No. Description

1 KBCLK
2 Ground
3 NC
4 KBDATA
5 NC
6 MSDATA
7 MSCLK
8 VCC

6

USBF1：USB Port #1 & #2 Connector 2x5 Pin 2.54mm

Pin No. Descption Pin No. Description

1 USB_VCC 2 Grond
3 Key 4 USBD1+
5 USBD0- 6 USBD1-
7 USBD0+ 8 Key
9 Ground 10 USB_VCC

7

r

1.5 FW-7880 19” 1U Rackmount Firewall Mechanisms

This section of the manual describes the mechanical and device nomenclature of FW-7880.

1.5.1 Face Panel

LCM Kepad

Status HDD

ConsoleConsole

Powe

Figure 5 – FW-7870 Face Panel

Face Panel LED Status and Behavior

The following table lists and explains the behavior of each LED on the FW-7870 front panel.

LED Color Status Description

PWR

HDD

Status

Ethernet Ports

Green On When FW-7870 power is switched ON

N/A Off No power connected

Yellow On Hard disk under access

N/A Off No Data access

Green On When system under access

NA Off No power access

Orange

Green/

Orange

On The Ethernet cable connect to RJ-45

Flash Action

Off 10M

Green On 100M

Orange On 1G

8

 Console Port: via the console port cable, this connector attaches FW-7870 to

the host PC.

 LCM & Keypad Please reference the Appendix B

9

1.5.3 Rear View

 Power Switch: Click the Power Switch , and the system will be power on.

Figure 6 – FW-7870 Rear View

Power Switch

Faulty or improper use of the power adaptor may cause permanent damage to the
power supply and the FW-7870. Plug the adaptor to an electrical wall outlet that
matches its specifications.

10