Lanner NCM-IGM401A, NCM-IGM403A, NCM-IGM201B, NCM-IGM401B, NCM-IGM403B Quick Installation Manual

Lanner Network NIC Module – Wide Type

Quick Installation Guide

Rev 1.0 September 10th, 2015

Revision History

This document contains proprietary information of Lanner Electronics Inc. –and is not to be

disclosed or used except in accordance with applicable agreements.

Copyright © 2015. All Rights Reserved.

Copyright© 2015 Lanner Electronics Inc. All rights reserved. The information in this document

is proprietary and confidential to Lanner Electronics Inc. No part of this document may be

reproduced in any form or by any means or used to make any derivative work (such as

translation, transformation, or adaptation) without the express written consent of Lanner

Electronics Inc. Lanner Electronics Inc. reserves the right to revise this document and to make

changes in content from time to time without obligatio n on the part of La nner Electronics Inc. to

provide notification of such revision or chan ge.

The information in this document is furnished for informational use only, is subject to change

without notice, and should not be constr ued as a commitm ent by Lanner Electroni cs Inc. Lanner

Electronics Inc. assumes no responsibility or liability for any errors or inaccuracies that may

appear in this document or any software that may be provided in association with this document.

Rev Date Descriptions

1.0 September 10, 2015 Official release