LANNENGSHITONG ELECTRONICS AWC1036 User Manual

User Manual
Material 80G woodfree paper
Process: 1c/1c

Wireless

Charging Pad and Hub

User Manual and
Safety Instructions

Wireless Pad Features

Qi
Wireless
Surface

LED Charge
Indicator

Technical Specifications

Model: AWC1036
Input: 27W 9V / 3.0A DC
Output: 10W Qi / 7.5W / 5W
Compatibility: Apple, Android, other devices
with wireless charging
Charge Indicator: White/amber LED indicator
Dimensions: 4 x 4 x 0.53 inches

Weight: 5.3 oz.
Your wireless pad is designed to provide

optimal power delivery for your wireless device:
 10W Qi certified fast charging for
Samsung Note9, S9+, S9, Note8, S8+, S8,
S7 Edge, S7, S6 Edge, S7, S6 Edge, S6, Note5,
LG G6, LGV30, Sony Xperia XZ2

• 7.5W Apple wireless charging for
iPhone X, iPhone X Max, iPhone X,
iPhone X, iPhone 8, iPhone 8 Plus

• 5W charging for other compatible
wireless charging devices

DC
Power In

USB-A
Output

k=100

Warranty

At Ubio Labs we are dedicated to
designing and manufacturing products
with superior performance and 100%
customer satisfaction. All of our products
come with a 1 year limited warranty
from date of purchase.

At Ubio Labs, we are always improving
our products’ features and functionality,
we reserve the right to change
specifications at any time without notice.

Important Safety Instructions

WARNING - When using this product, basic
precautions should always be followed,
including the following:
a) Read all manufacturers instructions before
using this product.
b) To reduce the risk of injury, close supervision
is necessary when the product is used near
children.
c) Do not put fingers or hands into the product.
d) Do not expose wireless pad to moisture,
rain, or snow.
e) Use of a power supply or charger not
recommended or sold by wireless pad
manufacturer may result in a risk of fire or
injury to persons.
f) Do not use the wireless pad in excess of its
output rating. Overloaded outputs above rating
may result in a risk of fire or injury to persons.

g) Do not disassemble the wireless pad. Take
it to a qualified service person when service or
repairs are required. Incorrect reassembly may
result in a risk of fire or injury to persons.
h) Do not expose the wireless pad to fire or
excessive temperature. Exposure to fire or
temperature above 122°F may cause explosion.
The wireless pad’s working temperature is
≤104°F.
i) Have service performed by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the product is
maintained.

NOTE: This equipment has been tested and
found to comply with the limits for a wireless
power charger, pursuant to Part 18 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate

ISED Compliance Statement
This device contains licence-exempt transmitter(s)
/receiver(s) that comply with Innovation, Science
and Economic Development Canada’s
licence-exempt RSS(s). Operation is subject to the
following two conditions:(1)This device may not
cause interference.(2)This device must accept any
interference, including interference that may cause
undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu
dans le présent appareil est conforme aux CNR
d’Innovation, Sciences et Développement économique
Canada applicables aux appareils radio exempts
de licence. L’exploitation est autorisée aux deux
conditions suivantes :(1)L’appareil ne doit pas
produire de brouillage; (2)L’appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage
est susceptible d’en compromettre le fonctionnement.
RF Exposure Compliance Statement
This equipment complies with FCC/IC radiation exposure
limits set forth for an uncontrolled environment.
This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
Cet équipement est conforme aux limites d'exposition aux
radiations FCC/IC établies pour un environnement non
contrôlé. Cet équipement doit être installé et utilisé avec
une distance minimale de 20 cm entre le radiateur et votre corps.

Wall Adapter Features

Folding
Wall Prongs

6 Ft. Cable

Technical Specifications

Model: CHG1085
Input: AC 110-240V, 50-60 Hz
Output: 27W 9V / 3A DC-DC
Dimensions: 2.28 x 2.28 x 1.06inches
Weight: 3.17 oz.

DO NOT RETURN TO
THE STORE

Our customer service team is here to help.

www.ubiolabs.com
[e-mail]
1-866-642-4428
(Monday - Friday 9am - 4pm PST)
2821 Northup Way, Suite 250
Bellevue, WA 98004

radio frequency energy and, if not installed and
used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encouraged to
try to correct the interference by one or more of
the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the
equipment and receiver.

- Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.

- Consult the dealer or an experienced radio/TV
technician for help.

CAUTION: Changes or modifications not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate the product. This equipment complies
with FCC radiation exposure limits set forth for
an uncontrolled environment. This equipment
should be installed and operated with minimum
distance 20cm between the radiator and your
body. This transmitter must not be co-located or
operating in conjunction with any other antenna
or transmitter.

SAVE THESE INSTRUCTIONS