Langogo Technology SUMMIT User Manual

S PEC

Product Name:

Product Size: 120 * 60.5 * 13mm

Product Color: Black

Product Weight: 163g

Touch Screen: 4-inch Touch Screen

540 *1080P Retina Display

Processor: MT6739 Quad-core

Storage: 32GB

Microphone: Four Noise-cancelling Microphone

Speaker: Hi-Fi Speaker

Battery: 3250mAh

Operating Temperature: -5°C---

Operating Humidity: <70%

Charging Time: 4 Hours (5V 2A Cha rg er)

Handheld Translation And Recording Device

40°C

Q UICK GUIDE

1. How To Use The Translation Function

Press the
button on
the right
side and

speak

hold to

One-button Translation:

It will automatically recognize between the two selected
languages and translate into another one.

Release to
hear the
translation
result

2. More Information

Visit www.langogo.ai/instructions.pdf for more instructions.

LEARN MORE

Thanks for using Langogo. Please visit
www.langogo.ai for more product information.

SUPPORT

Please contact [e-mail] for more support.

DISCLAIMER

*We a ssume n o respon sibility for an y damage or loss
resulting f rom your failure to comply with i nstructions
for use.

IMPORTANT

1.Please upgrade the system directly through the device

settings.

2.Do not use the de vice in outdoor environment during a

thunderstorm.

3.Please keep this device out of children’s reach.

4.Please note with the warning signs and comply with driving

regulations and laws when using this device.

5.Please use the original battery, accessories and parts that

come in the box.

6.Please take good care of the device to avoid any collision or

damage. If damage is found, please immediately stop operation

and contact the retailer for repair, otherwise it may result in

injury such as electric shock.

7.Please keep the device dry. Do not touch it with wet hands.

Keep liquids away from the device.

8.Do not use this device in places, such as petro stations or

cabins, etc., where wireless devices like mobile phones, are

prohibited with warning signs.

9.Please charge the battery in well-ventilated areas and away

from ammable and explosive materials.

10.Please keep away from any ignition source, such as heating

systems, heaters, ovens or open ames, etc. Avoid sun

exposure.

11.Do not attempt to repair or disassemble the device.

12.Please use the original USB charging cable that comes in the

box and refer to the charging speci cations for charging.

13.The device must be charged in a ventilated environment of

-40 ℃~ + 55 ℃, and must use the quali ed charger provided by

the regular manufacturer. The use of an unapproved charger

may be dangerous and will violate the approval and warranty

terms of this device.

14.This product is not equipped with an adapter, adapter

should meet the following requirements:

(1) The adapter shall have a national compulsory product

certi cation.

(2) The output speci cation of the adapter should be DC 5V-1A.

(3) The output interface of the adapter is a Type-C USB

interface.

If the adapter does not meet the requirements above, following

problems may cause:

1)The device cannot be charged;

2)The device has some faults, such as generate heat, crash,

unable to turn on, etc.

3)Battery life is shortened, battery generate heat, explosion,

etc.;

STATEMENT

FCC Declaration of Conformity

FCC ID: 2AQLY-SUMMIT

This device subjects to the FCC rule ANSI C63.4 and the Part

15 of the FCC rules.

Ensure the following two requirements have been met for

operations:

1.This device does not cause harmful interference;

2.This device can resist interference from other sources,

including what may lead to unintended operations.

Check FCC ID:

”sgnitteS“ kcilC :enO petS

”tuobA“ kcilC :owT petS

DI CCF weiv ot ”rotalugeR“ kcilC :eerhT petS

CE Statement

This product complies with the council RTTE Directive

99/5/EC.

The CE marking indicates this product is complied with all

applicable Directives.

FCC Statement

Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This
equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and
receiver.

-- Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.

-- Consult the dealer or an experienced radio/TV
technician for help
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions

(1)this device may not cause harmful interference, and
(2)this device must accept any interference received,

including interference that may cause undesired
operation.

This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum
distance 10mm between the radiator & your body.

CE Statement

Herby,Jiangxi Hongyaoda Communication Co., Ltd.declares
that this Handheld Translation And Recording
Device，Summit is in compliance with the essential
requirements and other relevant provisions of Directive
2014/53/EU.
In accordance with Article 10(2) and Article 10(10), this
product allowed to be used in all EU member states. Use
the Handheld Translation And Recording Device in the
environment with the temperature between -5℃ and 40℃
Use careful with the earphone maybe possible excessive
sound pressure from earphones and headphones can cause
hearing loss.

Risk of explosion if battery is replaced by an incorrect
type. Dispose of used batteries according to the
instructions.
The product shall only be connected to a USB interface of
version USB2.0
SAR: The device complies with RF specifications when the
device used at 5mm from your body.
Operation Frequency:

For 2.4G WIFI:
2412MHz~2472MHz (802.11b/802.11g/802.11n(HT20))
2422MHz~2462MHz (802.11n(HT40))
For BT/BLE:
2402MHz~2480MHz
For GPS: 1.57542GHz
For GSM:
E-GSM 900/GPRS 900/EGPRS 900:
TX: 880-915MHz; RX: 925-960 MHz
E-GSM 1800/GPRS 1800/EGPRS 1800:
TX: 1710-1785 MHz; RX: 1805-1880 MHz
For WCDMA:
UTRA Band I: TX:1920MHz~1980MHz;

UTRA Band VIII: TX: 880MHz~915MHz;

LTE Band 1: (UL)1920MHz~1980MHz,

LTE Band 3: (UL)1710MHz~1785MHz,

(DL)1805MHz~1880MHz
LTE Band 7: (UL)2500MHz~2570MHz,

LTE Band 8: (UL)880MHz~915MHz,

LTE Band 20: (UL)832MHz~862MHz,

LTE Band 28: (UL)703MHz~733MHz,

RX: 2110-2170MHz

RX: 925-960MHz

(DL)2110MHz~2170MHz

(DL)2620MHz~2690MHz

(DL)925MHz~960MHz

(DL)791MHz~821MHz

(DL)758MHz~788MHz

LTE Band 38: (UL)2570MHz~2620MHz,
(DL)2570MHz~2620MHz
LTE Band 40: (UL)2300MHz~2400MHz,

Max output power:
BT: 0.0011W BLE: 0.0011W WIFI: 0.0212W
E-GSM 900/GPRS 900/EGPRS 900: 1.9953W
E-GSM 1800/GPRS 1800/EGPRS 1800: 0.955W
UTRA Band I: 0.1945W
UTRA Band VIII: 0.1622W
LTE Band 1: 0.2333W
LTE Band 3: 0.2218W
LTE Band 7: 0.1977W
LTE Band 8: 0.246W
LTE Band 20: 0.2193W
LTE Band 28: 0.2089W
LTE Band 38: 0.2089W
LTE Band 40: 0.2138W

Manufacturer：Jiangxi Hongyaoda Communication Co., Ltd.

Address：No.69, North Huangjin Avenue, Ganzhou Economic
and Technological Development Zone, Ganzhou City, Jiangxi
Province,China
Tel: [phone]-8021
Fax: N/A
E-mail: [e-mail]

(DL)2300MHz~2400MHz