Lang Manufacturing PBE24 Installation Manual

Installation, Operation & Maintenance

Model: PBE12 & PBE24

Star Manufacturing International 10 Sunnen Drive St. Louis, MO 63143
Part Number: 2M-Z9993 Phone: [phone], Fax: [phone]
Rev. C WWW.STAR-MFG.COM October 23, 2007

.

SAFETY SYMBOL

Using any part other than genuine Star factory supplied parts relieves the
manufacturer of all liability.

Star reserves the right to change specifi cations and product design without
notice. Such revisions do not entitle the buyer to corresponding changes,
improvements, additions or replacements for previously purchased
equipment.

Due to periodic changes in designs, methods, procedures, policies and
regulations, the specifi cations contained in this sheet are subject to change
without notice. While Star Manufacturing exercises good faith efforts to provide
information that is accurate, we are not responsible for errors or omissions
in information provided or conclusions reached as a result of using the
specifi cations. By using the information provided, the user assumes all risks in
connection with such use.

These symbols are intended to alert the user to the presence of
important operating and maintenance instructions in the manual
accompanying the appliance.

RETAIN THIS MANUAL FOR FUTURE REFERENCE

NOTICE

MAINTENANCE AND REPAIRS

Contact your local authorized service agent for service or required maintenance. Please record the model
number, serial number, voltage and purchase date in the area below and have it ready when you call to

ensure faster service.

Model No.

Serial No.

Voltage

Purchase Date

Authorized Service Agent

Reference the listing provided with the unit

or

for an updated listing go to:

Website: www.star-mfg.com
E-mail [e-mail]
Telephone: [phone] Local [phone]

The Star Service Help Desk

Business 8:00 am to 4:30 p.m. Central Standard Time
Hours:

Telephone: [phone] Local [phone]

Fax: [phone] Local [phone]

E-mail [e-mail]

[e-mail]
[e-mail]

Website: www.star-mfg.com

Mailing Address: Star Manufacturing International Inc.

10 Sunnen Drive
St. Louis, MO 63143
U.S.A

2

TABLE OF CONTENTS

CHAPTER PAGE

READ FIRST......................................................................................................4

EQUIPMENT DESCRIPTION ..........................................................................6

UNPACKING.....................................................................................................7

INSTALLATION ...............................................................................................8

INITIAL START UP..........................................................................................10

OPERATION......................................................................................................11

CLEANING & MAINTENANCE PROCEDURES..........................................13

WIRING DIAGRAM PBE12 .............................................................................14

WIRING DIAGRAM PBE24 .............................................................................15

PBE12 EXPLODED VIEW & PARTS LIST.....................................................16-17

PBE24 EXPLODED VIEW & PARTS LIST.....................................................18-19

Rev. - 2006

3

IMPORTANT READ FIRST IMPORTANT

CAUTION: THE GRIDDLE PBE12 WEIGHS 70 LBS (32 KG). THE

PBE24 WEIGHS 130 LBS (59 KG). FOR SAFE
HANDLING, INSTALLER SHOULD OBTAIN HELP AS
NEEDED OR EMPLOY APPROPRIATE MATERIALS­HANDLING EQUIPMENT (SUCH AS A FORKLIFT,
DOLLY OR PALLET JACK) TO REMOVE THE UNIT
FROM THE PACKAGING AND MOVE IT TO THE
PLACE OF INSTALLATION.

CAUTION: ANY STAND, COUNTER OR OTHER DEVICE ON

WHICH THE GRIDDLE WILL BE LOCATED MUST BE
DESIGNED TO SUPPORT THE WEIGHT OF THE
GRIDDLE.

CAUTION: SHIPPING STRAPS ARE UNDER TENSION AND CAN

SNAP BACK WHEN CUT.

DANGER: THIS APPLIANCE MUST BE GROUNDED AT THE

TERMINAL PROVIDED. FAILURE TO GROUND THE
APPLIANCE COULD RESULT IN ELECTROCUTION
AND DEATH.

WARNING: INSTALLATION OF THE UNIT MUST BE DONE BY

PERSONNEL QUALIFIED TO WORK WITH
ELECTRICITY. IMPROPER INSTALLATION CAN
CAUSE INJURY TO PERSONNEL AND/OR DAMAGE
TO EQUIPMENT. UNIT MUST BE INSTALLED IN
ACCORDANCE WITH ALL APPLICABLE CODES.

NOTICE: The data plate is located on the back of each griddle.

The griddle voltage, wattage, serial number, wire size
and clearance specifications are on the data plate.
This information should be carefully read and
understood before proceeding with the installation.

NOTICE: The installation of any components such as a vent

hood, grease extractors or fire extinguisher systems
must conform to their applicable National, State and
locally recognized installation standards.

NOTICE: During the first few hours of operation you may

notice a small amount of smoke and a faint odor from
the smoke. This is normal for a new griddle and will
disappear after the first few hours of use.

CAUTION: ALWAYS KEEP THE AREA NEAR THE APPLIANCE

FREE FROM COMBUSTIBLE MATERIALS.

CAUTION: KEEP FLOOR IN FRONT OF EQUIPMENT CLEAN

AND DRY. IF SPILLS OCCUR, CLEAN IMMEDIATELY
TO AVOID THE DANGER OF SLIPS OR FALLS.

Rev. - 2006

4

IMPORTANT READ FIRST IMPORTANT

WARNING: KEEP WATER AND SOLUTIONS OUT OF CONTROLS.

NEVER SPRAY OR HOSE CONTROL CONSOLE,
ELECTRICAL CONNECTIONS, ETC.

CAUTION: MOST CLEANERS ARE HARMFUL TO THE SKIN, EYES,

MUCOUS MEMBRANES AND CLOTHING.
PRECAUTIONS SHOULD BE TAKEN TO WEAR RUBBER
GLOVES, GOGGLES OR FACE SHIELD AND
PROTECTIVE CLOTHING. CAREFULLY READ THE
WARNING AND FOLLOW THE DIRECTIONS ON THE
LABEL OF THE CLEANER TO BE USED.

WARNING: ALWAYS HOLD THE UPPER GRILL OPEN WHILE

CLEANING TO PREVENT INJURY IN CASE OF GRILL
CLOSING.

CAUTION:

DO NOT USE ICE OR WATER TO CLEAN THE COOKING

SURFACE WHILE THE GRIDDLE IS HOT. THE GRILL IS
MADE OF CAST IRON AND MAY CRACK FROM A
RAPID TEMPERATURE CHANGE.

Rev. - 2006 5

EQUIPMENT DESCRIPTION

Pane Bella, Single Grill (PBE12)

• Power: The PBE12 operates on 120, 208 or 240 volts. Each grill is supplied with

the appropriate cord and plug built in.

• Counter space required: 13.3 in wide (33.7 cm) and 14.0 in deep (35.6 cm).

• Weight: The grill weighs 70 lbs. (32 kg).

Pane Bella, Double Grill (PBE24)

• Power: The PBE24 operates on 208 or 240 volts. Each grill is supplied with the

appropriate cord and plug built in.

• Counter space required: 24 in wide (61 cm) and 14.0 in deep (35.6 cm).

• Weight: The grill weighs 130 lbs. (59 kg).

Rev. - 2006 6