Lang Manufacturing 36S-HS Installation Manual

36S-HS HIGH SHELF

INSTALLATION INSTRUCTIONS

NON - PRE-DRILLED RANGES

If the range that the Hi Shelf is to be installed on has been
pre-drilled by the factory

Pre-drilled Ranges

If the range has not been pr e- dr illed, continue with this
section

Place the High Shelf on top of t he r ange so that the back
of the range is flush with the back of the High Shelf.

Mark the five holes in through the flange in the High Shelf
onto the top of the rang e.

Mark the six holes through the sides of the High Shelf
onto the side of the range.

,

proceed to the next section -

.

Remove the High Shelf fr om t he range.
Drill all eleven holes using a # 27 drill bit.
Place the High Shelf back on top of the range and install

all sheet metal screws.

PRE-DRILLED RANGES

Place the High Shelf on top of t he range so that the holes in the High Shelf line up with
the holes in the range and the backs are flush.

Install five 10-24 x 1/2 Truss Head Machine Screws through the holes in the back flange
of the High Shelf int o t he top of the range.

Install three 10 x 1/2 Sheet Metal Screws through
side of the range.

each

side of the High Shelf int o the

Lang Manufacturing Company 6500 Merrill Creek Parkway Everett, WA 98203
Phone: [phone] Fax: [phone]