Lang Manufacturing 224ZSD User Manual

LANG MANUFACTURING • 10 SUNNEN DR. ST. LOUIS, MO 63143

PHONE: [phone] • FAX: [phone] • www.langworld.com

Item No.

Project

Quantity

CONSTRUCTION FEATURES

• 1” thick precision machined, polished steel cooking surface

• Continuously bottom welded 5-1/2” high rear & side splash
shields

• Full front 3-1/2” wide X 1” deep stainless steel grease trough
with…

• One or two [48”, 60” & 72” models] drops provided to one or
two grease drawers

• Double wall base construction

• Aluminized burner system spaced every 12”

• Heat shield provided below burners

• 4” adjustable legs provided [Stand option available]

PERFORMANCE FEATURES

• Thick griddle plate reduces hot & cold spots and retains heat

• Highly polished surface and continuously welded splash and
grease trough speed cleanup

• Electronic spark ignition, double wall construction and heats
shields increase operating efficiency

• Double wall construction and heat shells reduce side, back and
bottom clearances

CONTROL PACKAGE [Specify One]

❏ ACCU-TEMP™ Thermostat Controls [-T]

• Snap-action thermostats

• Independent temperature control every 12”

• Electronic ignition, griddle-ON switch

• 200˚ and 550˚F temperature control range

❏ SELECTRONIC™ Solid State Controls [-S]

• Area sensitive Resistance Temperature Detector system

• RTD probe reacts to a 1˚F temperature change

• Control for every 12” of cook surface

• 175˚ to 450˚F temperature control

SHORT/BID SPECIFICATION

Griddle shall be a LANG Manufa cturing Model __ [specify width:
24”, 36” , 48” , 60” or 72”]___ with: ❏ ACCU-TEMP Snap-action

Thermostat Controls [ZTD], ❏ ACCU-TEMP Snap-action
Thermostat Controls with chrome plate [ZTDC], ❏ SELECTRONIC
Solid State Controls [ZSD] or ❏ SELECTRONIC Solid State
Controls with chrome plate [ZSDC], gas heated aluminized burn­er system, with bottom baffles and direct spark electronic igni­tion; 1” thick polished cooking surface; 5-1/2” high side and back
splash and full front 1” deep x 3-1/2” wide grease trough; double
wall base construction; and all the features listed and the options/
accessories checked:

STANDARD PRODUCT WARRANTY

• Three year parts & labor

• 5 year guarantee on chrome plated surfaces when ordered

Sheet No. LSP-CSGD (rev. 06/14)

FOCUS OPTION

Custom Grooving [Specified in 12”
increments, from left to right. 24”
maximum, from either side.]

Model Unit Width Approx.Surface Area Burners Approx. BTU Input*

❏ 224[ZTD/ZSD] 24” 720 sq. in. 2 70,000

❏ 236[ZTD/ZSD] 36” 1080 sq. in. 3 105,000

❏ 248[ZTD/ZSD] 48” 1440 sq. in. 4 140,000

❏ 260[ZTD/ZSD] 60” 1800 sq. in. 5 175,000

❏ 272[ZTD/ZSD] 72” 2160 sq. in. 6 210,000

SIZING AND PERFORMANCE GUIDE

* For both natural and propane gas

Model 236ZTD

ChefSeries™Gas, Counter Model Griddles, Extended Depth Models: [224,236,248,260,272][ZTD/ZSD/ZTDC/ZSDC]

LANG MANUFACTURING • 10 SUNNEN DR. ST. LOUIS, MO 63143

PHONE: [phone] • FAX: [phone] • www.langworld.com

Due to continuous improvements, specifications subject to change without notice.

ChefSeries™Gas, Counter Model Griddles, Extended Depth Models: [224,236,248,260,272][ZTD/ZSD/ZTDC/ZSDC]

OPTIONS & ACCESSORIES

❏ Custom Grooving [Specified in 12” increments, from left to right.

24” maximum, from either side.]

❏ Stainless steel tubular-leg stand with adjustable feet

❏ Stainless steel tubular-leg stand with casters & shelf
❏ Clamshell“ two sided cooking
❏ Chrome plated griddle surface

INSTALLATION REQUIREMENTS

• G Specify: ❏ natural gas or ❏ propane gas: via 3/4” NPT connection

• Gas pressure regulator provided

• Specify elevation if project is over 2000 feet.

• E 115V, 1-Phase, 50/60 Hz, 2-AMP electrical connection

• Cord & plug is provided

• Installation under approved vent hood required.
[All connections from rear. See below for location and delivery requirements]

Model 224ZTD* shown
(Connections vary by model. Generally centered at rear.)
[Top View/Plan]

CAD SYMBOLS & PRICING

Model

Height x Width x Depth Clearance from

Weight

Freight

(Not including legs)

combustible surfa ce

Actual Shipping

Class

224Z[TD/SD]

16.5” x 24.0” x 37.25” 400 lbs. 440 lbs.
85

420mm x 610mm x 943mm 181 kg 199 kg

236ZT[TD/SD]

16.5” x 36.0” x 37.25” 530 lbs. 565 lbs.
85

420mm x 914mm x 943mm Sides: 4” 240 kg 256 kg

248ZT[TD/SD]

16.5” x 48.0” x 37.25” Back: 4” 680 lbs. 730 lbs.
85

420mm x 1219mm x 943mm Bottom: 4” 308 kg 331 kg

260ZT[TD/SD]

16.5” x 60” x 37.25” 820 lbs. 870 lbs.
85

420mm x 1524mm x 943mm 372 kg 395 kg

272ZT[TD/SD]

16.5” x 72.0” x 37.25” 960 lbs. 1020 lbs.
85

420mm x 1830mm x 943mm 435 kg 463 kg

Model

E Electrical Requirements

G Gas Requi reme nts

Voltage Total kW Phase Amps/Line

(3/4” NPT)

224Z[TD/SD] 70,000 BTU/hr
236Z[TD/SD] 105,000 BTU/hr
248Z[TD/SD] 115V/60Hz 0.5 1 2.0 140,000 BTU/hr
260Z[TD/SD] 175,000 BTU/hr
272Z[TD/SD] 210,000 BTU/hr

All Models
[Right Side View]

Model 224ZTD (Width varies with model)
[Front View/Elevation]

Sheet No. LSP-CSGD (rev. 06/14)