Lang Manufacturing 150F-MN User Manual

LANG MANUFACTURING • 10 SUNNEN DR. ST. LOUIS, MO 63143

PHONE: [phone] • FAX: [phone] • www.langworld.com

Item No.
Project
Quantity

US Navy, High Capacity Floor Model Fryer Model: 150F-MN

MARINE CONSTRUCTION FEATURES

Fryer manufactured to MilSpec S-F-695G, including:

• One piece heavy duty 430 Series stainless steel exterior, with No. 4 finish

• Enclosed cabinet base with door

• 14” deep stainless steel fry kettle

• Smother cover standard

• 22-kW [total] rod type low watt density heating elements

• Two frying baskets with manual basket lift system

• Front mounted oil drain ball valve

• Quick disconnect oil drain extension standard

• Optional 6” legs with height-adjustable deck mounting flanges

PERFORMANCE FEATURES

• 125 lbs./hr frozen fries production in space saving 15” wide unit

• 14” deep kettle provides 2” of freeboard at 15˚ ship’s roll

• Low watt density heating elements provide even heating and extend
shortening life

• Heating elements hinge up and out of kettle for easy cleaning

• Enclosed cabinet base provides additional storage

• Unit is fully serviceable from front

CONTROL PACKAGE

• Power ON-OFF switch

• Negative bias overtemp thermostat

• Navy-approved test switch

• POWER, HEAT & OVER-TEMP indicator lights

The only fryer to meet BOTH milspec S-F-695G and SOLAS requirements*

*SOLAS (Safety of Lives At Sea): A redundant control and extra safety meas­ures to prevent oil temperatures from exceeding safe limits.

MARINE SHORT/BID SPECIFICATION

Fryer shall be a LANG Manufacturing Model 150F -MN, a 15”
wide floor model electric heated unit with 22-kW power input; 50­lb. shortening capacity and 125 lbs./hr frozen fries production
capacity; two half size baskets with manual basket lifts; all
stainless steel cabinet base and 14” extra-deep fry tank with
smother cover; negative bias overtemp thermostat, Navy­approved test switch. Meets SOLAS requirements.*

MARINE PRODUCT WARRANTY

One year, parts & labor. (Labor in U.S. only)

Sheet No. LMSP-F2 (rev. 11/12)

Model 150F-MN shown with optional legs

Power Input 22-kW

Shortening Capacity 50 lbs.

Preheat Time [to 350˚F] 7 minutes

Frozen Fries Production 125 lbs./hr

PERFORMANCE GUIDE

Milspec

S-F-695G

MarineSeries

LANG MANUFACTURING • 10 SUNNEN DR. ST. LOUIS, MO 63143

PHONE: [phone] • FAX: [phone] • www.langworld.com

© 2004 Lang Manufacturing Company Printed in U.S.A. 3/06-M-12796

Due to continuous improvements, specifications subject to change without notice.

MARINE INSTALLATION REQUIREMENTS

• Approved for military shipboard installations only

• E Single 440V, 3-Phase electrical connection

• Installation under approved vent hood required.

• Optional 6” legs with height-adjustable deck mounting flanges
[Power connection from rear. See below]

Sheet No. LMSP-F2 (rev. 11/12)

US Navy, High Capacity Floor Model Fryer Model: 150F-MN

[Front View/Elevation] [Right Side View] [Top View/Plan]

Model

Height x Width x Depth Cleara nce from

Weight

Freight

(Including legs)

combustible surfa ce

Actual Shipping

Class

150F-MN

40.5” x 15.0” x 34.5” Sides: 0” 130 lbs. 180 lbs.
85

1029mm x 381mm x 876mm Back: 0” 59 kg 82 kg

Model Volts AC - Hz Total kW Amps - Three Pha se Amps - Single Phase

150F-MN 440 - 50/60 22.0 43.3 N/A

Shown with
optional legs