Lang Manufacturing 136SDI Installation Manual

IL1388

SELECTRONIC

DROP-IN

ELECTRIC GRIDDLE

136SDI, 148SDI, 160SDI

Installation and

Operation

Instructions

2M-W355 Rev. C 11/10/08

160SDI

These symbols are intended to alert the user to the presence of important operating and maintenance instructions in the manual accompanying the appliance.

FOR YOUR SAFTEY

DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND LIQUIDS IN

THE VICINTIY OF THIS OR ANY OTHER APPLIANCE.

POST IN PROMINENT LOCATION

INSTRUCTIONS TO BE FOLLOWED IN THE EVENT USER SMELLS GAS. THIS

INFORMATION SHALL BE OBTAINED BY CONSULTING YOUR LOCAL GAS SUPPLIER.

AS A MINIMUM, TURN OFF THE GAS AND CALL YOUR GAS COMPANY AND YOUR

AUTHORIZED SERVICE AGENT. EVACUATE ALL PERSONNEL FROM THE AREA.

WARNING

IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR MAINTENANCE

CAN CAUSE PROPERTY DAMAGE, INJURY OR DEATH. READ THE INSTALLATION,

OPERATION & MAINTENANCE INSTRUCTIONS THOROUGHLY BEFORE INSTALLING OR

SERVICING THIS EQUIPMENT.

WARNING

RISK OF FIRE OR ELECTRIC SHOCK

DO NOT OPEN

WARNING, TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE

CONTROL PANEL. NO USER-SERVICABLE PARTS INSIDE. REPAIRS SHOULD BE DONE BY AUTHORIZED SERVICE PERSONNEL ONLY.

NOTICE

Using any part other than genuine Lang factory supplied parts relieves the manufacturer of all liability.

Lang reserves the right to change specications and product design without notice. Such

revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.

Due to periodic changes in designs, methods, procedures, policies and regulations,

the specications contained in this sheet are subject to change without notice. While Lang exercises good faith efforts to provide information that is accurate, we are not

responsible for errors or omissions in information provided or conclusions reached as a

result of using the specications. By using the information provided, the user assumes all risks in connection with such use.

MAINTENANCE AND REPAIRS

Contact your local dealer for service or required maintenance. Please record the model number, serial

number, voltage and purchase & Installation Information in the area below and have it ready when you

call to ensure a faster service.

SAFETY SYMBOL

Model No.:

Serial No.:

Voltage:

1-Phase

or 3 Phase:

Purchased From:

Location:

Purchase

Date:

Installed Date:

PROBLEMS, QUESTIONS or CONCERNS

Before you proceed consult you authorized Lang service agent directory

Call the Lang Technical Service & Parts Department at 314-678-6315.

TABLE OF CONTENTS

Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Equipment Description Unpacking Installation

Prepare the Cabinet . . . . . . . . . . . . . . . . . . . . . . . . 7

Install Griddle into the Cabinet . . . . . . . . . . . . . . . . . . 8

Electrical Connection . . . . . . . . . . . . . . . . . . . . . . . 8

Initial Start-Up

Pre-Power On . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Power On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Seasoning Cooking Surface . . . . . . . . . . . . . . . . . . . . 9

Operation

General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Suggested Times and Temperatures . . . . . . . . . . . . . . . 10

Maintenance

Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Carbon Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . 11

Troubleshooting

Symptoms / Possible Causes . . . . . . . . . . . . . . . . . . . 12

Possible Causes / Test . . . . . . . . . . . . . . . . . . . . . . 13

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

. . . . . . . . . . . . . . . . . . . . . . . . 5

Wiring Diagram

208/240VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

480VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Exploded View & Parts List . . . . . . . . . . . . . . . . . . . . . 16 - 18

NOTICE ServiceonthisoranyotherLangappliancemustbeperformedbyqualied

personnel only. Consult your Lang Authorized Service Agent Directory. You can call our toll free number 314-678-6315 or visit our web site WWW.STAR-MFG.COM for the service agent nearest you.

28. 5"

723mm

11 .1" /281mm

7.6" /19 4mm

2.5" /64mm

2.8" /70 mm MIN.

6.5"/16 5 mm

11 .1" /281mm

74. 4" /1890mm

62. 4" /1586mm

50. 4" /1281mm

38. 4" /976mm

26. 4" /672mm

26.8 "

679 mm

WIDTH VARIES

BY MOD E L

WIDTH & POSITION

VARY BY MODEL

28.5 "/723mm

IL1572

EQUIPMENT SPECIFICATIONS

Model

136SDI

148SDI

160SDI

Top-Rough Opening Controls-Opening

Width Depth Height Width Actual Shipping

36.8” 26.8” 6.5” 30.8”

933mm 679mm 165mm 781mm 120 kg 186 kg

48.8” 26.8” 6.5” 37.3” 368 lbs. 525 lbs.

1238mm 679mm 165mm 946mm 167 kg 239 kg

60.8” 26.8” 6.5” 43.8” 589 lbs. 665 lbs.

1543mm 679mm 165mm 1111mm 268 kg 302 kg

Clearance from

combustible surface

Sides: 2”, Back: 2”

Weight

263 lbs. 410 lbs.

Freight

Class

MODEL VOLTS AC Hz. PH 136SDI 208/240 60 1/3 18 87 2 50 50 50 6 136SDI-480V 480 60 3 18 22 22 22 12 148SDI 208/240 60 1/3 24 116 1 75 75 50 3 148SDI-480V 480 60 3 24 33 33 22 8

TOT.A 1PH. SPLY L1 L2 L3 SUPPLY

TOT.

1PH. SPLY L1 L2 L3 SPLY

160SDI 208/240 60 1/3 12 58 2 50 29 29 6 18 87 2 50 50 50 6 160SDI-480V 480 60 3 12 22 13 13 12 18 22 22 22 12

EQUIPMENT DESCRIPTION

1” Griddle Surface

Gutter

Grease Drawer

Section Temp Dial

Main Power Switch

Power

Connection

Box

IL1570

Electric Drop-In Griddle

The griddle dimensions are 26” (66cm) Deep, 5 3/8” (13.65cm) High, and width is dependent on model number.

The griddle surface is constructed of 1” thick highly polished steel to ensure even heat throughout the griddle. This reduces hot and cold spots and improves recovery time.

Controls

Each twelve-inch section has its own easy to use solid-state temperature controls with a temperature range from 175°F (79°C) to 450°F (232°C) in 25° increments.

Each twelve-inch section has a set of 6 kW elements for high efciency, quick recovery and outstanding

performance.

NOTICE The data plate is on the right side of the griddle. The oven voltage,

wattage,serialnumber,wiresize,andclearancespecicationsare

on the data plate. This information should be carefully read and understood before proceeding with the installation.

UNPACKING

Receiving the Griddle

Upon receipt, check for freight damage, both visible and concealed. Visible damage should be noted on the freight bill at the time of delivery and signed by the carrier’s agent. Concealed loss or damage means loss or damage, which does not become apparent until the merchandise has been unpacked.

If concealed loss or damage is discovered upon unpacking, make a written request for inspection by the carrier’s agent within 15 days of delivery. All packing material should be kept for inspection. Do not return damaged merchandise to Star Manufacturing International. File your claim with the carrier.

Location

Prior to un-crating, move the griddle as near its intended location as practical. The crating will help protect the unit from the physical damage normally associated with moving it through hallways and doorways.

Un-crating

The griddle will arrive completely assembled inside a wood frame covered by a cardboard box and strapped to a skid.

Remove the cardboard cover, cut the straps and remove the wood frame.

THE UNIT IS EXTREMELY HEAVY. FOR SAFE HANDLING,

INSTALLER SHOULD OBTAIN HELP AS NEEDED, OR EMPLOY

CAUTION

APPROPRIATE MATERIALS HANDLING EQUIPMENT (SUCH AS A FORKLIFT, DOLLY, OR PALLET JACK) TO REMOVE THE UNIT FROM THE SKID AND MOVE IT TO THE PLACE OF INSTALLATION.

ANY STAND, COUNTER OR OTHER DEVICE ON WHICH OVEN

WILL BE LOCATED MUST BE DESIGNED TO SUPPORT THE WEIGHT OF THE GRIDDLE.

SHIPPING STRAPS ARE UNDER TENSION AND CAN SNAP BACK

WHEN CUT.

+ 14 hidden pages