Lang Manufacturing 124ZS User Manual

LANG MANUFACTURING • 10 SUNNEN DR. ST. LOUIS, MO 63143

PHONE: [phone] • FAX: [phone] • www.langworld.com

Item No.

Project

Quantity

ChefSeries™ Electric, Counter Model Griddles Models: 124,136,148,160,172 [ZT/ZS/ZTC/ZSC]

CONSTRUCTION FEATURES

• 1” thick precision machined, polished steel cooking surface

• Continuously bottom welded 5-1/2” high rear & side splash
shields

• Full front 3-1/2” wide X 1” deep stainless steel grease trough

• 8 quart capacity grease drawer, with removable fully enclosed
sleeve

• All stainless steel base cabinet construction

• 4” adjustable legs provided [Stand option available]

PERFORMANCE FEATURES

• Thick griddle plate reduces hot & cold spots and retains heat

• Highly polished surface and continuously welded splash and
grease trough speed cleanup

• Heating elements Incoloy sheathed for long life

• Elements are pressure clamped to bottom of griddle plate for
more even heating

• Recessed control panel protects control knobs

• Accurate temperature control

CONTROL PACKAGE [Specify One]

❏ ACCU-TEMP™ Thermostat Controls [-T]

• Snap-action thermostats

• Independent temperature control every 12”

• Electronic ignition, griddle-ON switch

• 200˚ and 550˚F temperature control range

❏ SELECTRONIC™ Solid State Controls [-S]

• Area sensitive Resistance Temperature Detector system

• RTD probe reacts to a 1˚F temperature change

• Control for every 12” of cook surface

• 175˚ to 450˚F temperature control

SHORT/BID SPECIFICATION

Griddle shall be a LANG Manufa cturing Model 124, 136, 148,
160, 172___ ❏ ACCU-TEMP Snap-action Thermostat Controls
[ZT], ❏ ACCU-TEMP Snap-action Thermostat Controls with

chrome plate [ZTC], ❏ SELECTRONIC Solid State Controls [ZS]
or ❏ SELECTRONIC Solid State Controls with chrome plate [ZSC]
for every 12” of griddle width; 6-kW per foot of Incoloy sheathed
heating elements, pressure clamped to plate bottom; 1” thick pol­ished cooking surface, with 5-1/2” high side and back splash and
full front 1” deep X 3-1/2” wide grease trough; and all the fea­tures listed and the options/accessories checked:

STANDARD PRODUCT WARRANTY

• Three year parts & labor

• 5 year guarantee on chrome plated surfaces when ordered

Model Width Surface Area Controls kW Input*

❏ 124 24” 552 sq. in. 2 12-kW

❏ 136 36” 828 sq. in. 3 18-kW

❏ 148 48” 1104 sq. in. 4 24-kW

❏ 160 60” 1380 sq. in. 5 30-kW**

❏ 172 72” 1656 sq. in. 6 36-kW**

SIZING AND PERFORMANCE GUIDE

Sheet No. LSP-GDZ (rev. 06/14)

* 6-kW per foot of griddle
** Total power input, two power connections required

FOCUS OPTIONS

Custom Grooving [Specified in 12”
increments, from left to right. 24”
maximum, from either side.]

Chrome griddle plate surface also
available

Model 148ZT Shown with optional

CSE12AG flare reduction shield

CHROME MODELS ONLY

LANG MANUFACTURING • 10 SUNNEN DR. ST. LOUIS, MO 63143

PHONE: [phone] • FAX: [phone] • www.langworld.com

Due to continuous improvements, specifications subject to change without notice.

OPTIONS & ACCESSORIES

❏ Custom Grooving [Specified in 12” increments, from left to right.

24” maximum, from either side.]

❏ Top-welded – adds a continuous weld around inside splash perimeter

❏ Stainless steel tubular-leg stand with undershelf & adjustable feet
❏ Stainless steel tubular-leg stand with undershelf & casters
❏ Chrome griddle plate surface

INSTALLATION REQUIREMENTS

• E 208V, 3-phase, field convertible to 240V or 1-phase; or 408V, 3-phase
power connection

• E1 E2 Two electric connections required for 60 & for 72” wide units

• Installation under approved vent hood required.
[Connections from rear. See other below for location and power requirements]

Sheet No. LSP-GDZ (rev. 06/14)

All models All Models All Models

[Front View/Elevation] [Right Side View] [Top View/Plan]

Width varies with model 160, 172 require 2 E connections

ChefSeries™ Electric, Counter Model Griddles Models: 124,136,148,160,172 [ZT/ZS/ZTC/ZSC]

CAD SYMBOLS & PRICING

Model

Height x Width x Depth Clearance from

Weight

Freight

(Not including legs)

combustible surfa ce

Actual Shipping

Class

124Z[T/S]

16.57” x 24.0” x 29.67” 243 lbs. 280 lbs.
85

421mm x 610mm x 754mm 110 kg 127 kg

136Z[T/S]

16.57” x 36.0” x 29.67” 368 lbs. 410 lbs.
85

421mm x 914mm x 754mm Sides: 2” 167 kg 186 kg

148Z[T/S]

16.57” x 48.0” x 29.67” Back: 2” 483 lbs. 515 lbs.
85

421mm x 1219mm x 754mm 220 kg 234 kg

160Z[T/S]

16.57” x 60.0” x 29.67” 621 lbs. 665 lbs.
85

421mm x 1524mm x 754mm 282 kg 302 kg

172Z[T/S]

16.57” x 72.0” x 29.67” 724 lbs. 800 lbs.
85

421mm x 1830mm x 754mm 329 kg 364 kg

Model Total kW

Maximum AMP Per Line

208V/3-Phase 240V/3-Pha se 408V/3-Pha se 208V/1-Phase 240V/1-Phase

124Z[T/S] 12.0 50.0 43.3 21.7 57.7 50.0
136Z[T/S] 18.0 50.0 43.3 21.7 86.5 75.0
148Z[T/S] 24.0 75.0 65.0 32.5 115.2 100.0
160Z[T/S] 30.0 [12/18]* 50.0 43.3 21.7 86.5 75.0
172Z[T/S] 36.0 [18/18]* 50.0 43.3 21.7 86.5 75.0

* Load split for the two power connections required.