Lang Manufacturing 124T-M Service Manual

S6161-LR-FSE-010
0910-LP-527-3200

OPERATION AND SERVICE MANUAL

FOR

SHIPBOARD ELECTRIC DROP-IN GRIDDLE

MODEL NUMBERS:

136TDI-VG, 148TDI-VG, 172TDI-VG,

LANG MANUFACTURING

DIVISION OF STAR MANUFACTURING INTERNATIONAL

10 SUNNEN DRIVE

ST. LOUIS, MO, 63143

DISTRIBUTION STATEMENT

THIS PUBLICATION IS REQUIRED FOR OFFICIAL USE OR FOR
ADMINISTRATIVE OR OPERATIONAL PURPOSES. DISTRIBUTION IS LIMITED
TO U.S. GOVERNMENT AGENCIES ONLY. OTHER REQUESTS FOR THIS
DOCUMENT MUST BE REFERRED TO COMMANDER, NAVAL SEA SYSTEMS
COMMAND, SEA 09, WASHINGTON, DC 20362

SUPERCEDURE NOTICE

CANCELS AND SUPERCEDES S6161-LR-FSE-010

DATED MARCH 2002

AND ALL CHANGES THERETO

Star Manufacturing International 10 Sunnen Drive, St. Louis, MO 63143
Part No. 2M-W357 Phone: [phone], Fax: [phone]
Rev. - www.Star-mfg.com

April, 24, 2007

1

MANUAL SUPPLEMENT FOR MARINE EQUIPMENT

THIS EQUIPMENT IS APPROVED FOR INSTALLATION ONLY ON
VESSELS GREATER THAN 65 FEET IN LENGTH IN
ACCORDANCE WITH USCG REGULATIONS IN TITLE 46 CFR 110-

113.

ANY WIRING USED IN THE INSTALLATION OF THIS APPLIANCE
MUST BE STRANDED COPPER.

2

0910-LP-572-3200

APRIL 2007

IDENTIFYING TECHNICAL PUBLICATION SHEET

1. IDENTIFICATION DATA:

2. PURPOSE: THIS TECHNICAL PUBLICATION IS ISSUED FOR THE PURPOSE

OF IDENTIFYING AN AUTHORIZED TECHNICAL MANUAL FOR NAVY USE
AND FOR PROVIDING SUPPLEMENTAL TECHNICAL INFORMATION.
A. MANUFACTURER: STAR MFG. INTERNATIONAL.
B. CONTRACT NUMBER: _________________________________________
C. EQUIPMENT: GRIDDLE, SELF HEATING, ELECTRIC
D. REQUISITION NUMBER: NOT REFERENCED
E. NATIONAL STOCK NUMBER (NSN): ____________________________
F. TITLE: MAINTENANCE MANUAL FOR GRIDDLE, SELF HEATING,

ELECTRIC

G. DATE OF PUBLICATION: APRIL 2007
H. PREPARING ACTIVITY: DEFENSE GENERAL SUPPLY CENTER
I. APPLICABLE TMCR NUMBER: 860172
J. EXTENT OF PROPOSED SUPPLEMENTAL DATA (10% MAXIMUM): 1%
K. LIST OF TECHNICAL MANUAL FOR THIS EQUIPMENT PROCURED

UNDER ANOTHER CONTACT:

3. ADDITIONAL COPIES: ADDITIONAL COPIES ARE AVAILABLE FROM:

NAVAL PUBLICATION AND FORMS CENTER

5801 TABOR AVENUE

PHILADELPHIA, PA 19120-5099

4. COVER: THE TECHNICAL MANUAL OUTSIDE COVER SHALL CONTAIN

THE FOLLOWING STATEMENTS:

PUBLISHED BY DIRECTION OF COMMANDER, NAVAL SEA SYSTEMS
COMMAND

3

S6161-LR-FSE-010

0910-LP-527-3200

APPROVAL AND PROCUREMENT RECORD

APPROVAL DATA FOR: GRIDDLE, SELF-HEATING, ELECTRIC

TITLE OF MANUAL: MAINTENANCE MANUAL FOR: GRIDDLE,

SELF-HEATING, ELECTRIC

APPROVAL AUTHORITY: NAVAL SHIP SYSTEMS ENGINEERING STATION

CONTRACT NUMBER NSN # OF UNITS APL/CID

DLA441-92-M-2844 7310-01-359-2844 6 LG72MDI

DLA441-92-M-Y175 7310-01-359-2845 13 LG36MDI

DLA400-86-D-0090 7310-01-104-1214 14 LG48M

REMARKS:

DATE: MARCH 2002

CERTIFICATION:

IT IS HEREBY CERTIFIED THAT THE TECHNICAL MANUAL PROVIDED
UNDER CONTRACT NUMBER DLA441-92-M-2844, DLA441-92-M-Y175, DLA400­86-D-0090 FOR LANG LG72MDI, LG36MDI, AND LG48M HAS BEEN APPROVED
BY THE APPROVAL DATA SHOWN ABOVE:

______________________________

DIRECTOR, GOV’T CONTRACTS

LANG MANUFACTURING COMPANY

FSCM / CAGE #: 34931

4

CHANGE RECORD

Change no. Date Title and/or Brief Description

Signature of

Validating Officer

5

TABLE OF CONTENTS

CHAPTER PAGE

1. TABLE OF CONTENTS ...............................................................................6

2. LIST OF ILLUSTRATIONS.......................................................................... 7

3. READ FIRST .................................................................................................8

4. SPECIFICATIONS ........................................................................................11

5. EQUIPMENT DESCRIPTION ...................................................................... 14

6. INSTALLATION ........................................................................................... 16

7. OPERATION.................................................................................................. 18

8. MAINTENANCE & TROUBLESHOOTING PROCEDURES .................... 19

9. PARTS LIST .................................................................................................. 24

10. WIRING DIAGRAMS................................................................................... 26

11. WARRANTY................................................................................................. 28

6

LIST OF ILLUSTRATIONS

FIGURE # TITLE OF ILLUSTRATION PAGE #

1 Specification Sheets 11 to 20

2 MDI-36 Cut Out 21

3 MDI-48 Cut Out 22

4 MDI-72 Cut Out 23

5 Leg Pad Layout 27

6 Sensor Location (Calibration) 31

7 Wiring Diagram 208/240V 34

8 Wiring Diagram 480V 35

7

IMPORTANT READ FIRST IMPORTANT

CAUTION: THE GRIDDLE IS EXTREMELY HEAVY. FOR SAFE

HANDLING, INSTALLER SHOULD OBTAIN HELP AS
NEEDED, OR EMPLOY APPROPRIATE MATERIALS
HANDLING EQUIPMENT (SUCH AS A FORKLIFT,
DOLLY, OR PALLET JACK) TO REMOVE THE UNIT
FROM THE SKID AND MOVE IT TO THE PLACE OF
INSTALLATION.

CAUTION: ANY STAND, COUNTER OR OTHER DEVICE ON

WHICH GRIDDLE WILL BE LOCATED MUST BE
DESIGNED TO SUPPORT THE WEIGHT OF THE
GRIDDLE(S).

CAUTION: SHIPPING STRAPS ARE UNDER TENSION AND CAN

SNAP BACK WHEN CUT.

DANGER: THIS APPLIANCE MUST BE GROUNDED AT THE

TERMINAL PROVIDED. FAILURE TO GROUND THE
APPLIANCE COULD RESULT IN ELECTROCUTION
AND DEATH.

WARNING: INSTALLATION OF THE UNIT MUST BE DONE BY

PERSONNEL QUALIFIED TO WORK WITH
ELECTRICITY. IMPROPER INSTALLATION CAN
CAUSE INJURY TO PERSONNEL AND/OR DAMAGE
TO EQUIPMENT. UNIT MUST BE INSTALLED IN
ACCORDANCE WITH ALL APPLICABLE CODES.

NOTICE: The data plate is located next to the grease drawer,

behind access panel. The griddle voltage, wattage,
serial number, wire size, and clearance specifications
are on the data plate. This information should be
carefully read and understood before proceeding
with the installation.

NOTICE: The installation of any components such as a vent

hood, grease extractors, fire extinguisher systems,
must conform to their applicable National, State and
locally recognized installation standards.

NOTICE: During the first few hours of operation you may

notice a small amount of smoke coming off the
griddle surface, and a faint odor from the smoke.
This is normal for a new griddle and will disappear
after the first few hours of use.

CAUTION: ALWAYS KEEP THE AREA NEAR THE APPLIANCE

FREE FROM COMBUSTIBLE MATERIALS.

CAUTION: KEEP FLOOR IN FRONT OF EQUIPMENT CLEAN

AND DRY. IF SPILLS OCCUR, CLEAN IMMEDIATELY,
TO AVOID THE DANGER OF SLIPS OR FALLS.

8