Page 1
TI-BOOST manual
Notes
* The TI-BOOST is a true bypass pedal.
* Unplug any instrument when not in use.
* When storing the unit for long periods of time,
disconnect the battery
* To access/change the battery remove the base
of the pedal.
* You may hear some loss of level and unwanted
distortion when the battery begins to run down
Specication
for further information and examples of Tony Iommi’s
actual settings, plus additional applications visit
www.blackcountrycustoms.co.uk
Page 2
TI-BOOST MANUAL
Page 3
TI-BOOST manual
We are very proud of our association with Tony Iommi
and to have him commission us with his only authorised
signature pedal is a real honour.
The pedal functions in a similar way to that of Tony’s
Iommi’s legendary modied Range master – giving you
a signicant bass cut and mid boost. We’ve included a
little more gain and more selectable EQ options to make
it more appealing to players looking to nd their own
signature sounds.
1
2
3
4
5
6
7
8
Page 4
Drive: Controls the amount of drive within the signal
1
and will take you from clean through bluesy crunch
to lead.
2
Low: Shapes the overall low frequency response of
the pedal.
Output: Connect this jack to the input of your amp.
3
Volume: Controls the output level of the pedal.
4
Allows you to hit the front end of an amp harder and
generate amp distortion and sustain. Can also be
used to attenutate the amplier.
Mid: A 3 position custom voiced MID boost switch.
5
Down position - LO mid boost, Middle - at, Up - hi
end boost.
6
High: Shapes the overall High frequency response
of the pedal.
Input: Connect this jack to the output of your
7
instrument.
8
9VDC: Input for external 9V external D.C. power
supply.
Loading...