Land Pride Z60, Z72 User Manual

Steering Lever Extension Kit

Accu-Z Riding Mower Z52, Z60 & Z72 Series

Before You Start

When you see this symbol, the subsequent
instructions and warnings are serious - follow

!

without exception. Your life and the lives of
others depend on it!

IMPORTANT: Before you begin, read these
instructions and check to be sure all parts and tools
are accounted for. Please retain these installation
instructions for future reference and parts ordering
information.

Your Land Pride Steering Lever Extension Kit is
exclusively designed for your Land Pride Accu-Z Riding
Mower. Please read these installation instructions and
your Accu-Z Operator’s Manual thoroughly before
beginning. Especially read information relating to safety
concerns. Also included in the Operator’s Manual is
important information on operation, adjustment,
troubleshooting, and maintenance for this attachment
(some manual sections do not apply to all accessories).

A separate Parts Manual for replacement parts can be
purchasedfromyourdealer oravailable freeof chargeat
www.landpride.com. Have model and serial numbers
handy when placing an order.

Manual Part Numbers:

• Operator’sManual . . . . . . . . . . . . . . . . . 356-005M

• Parts Manual . . . . . . . . . . . . . . . . . . . . . 356-005P

General Information

These assembly instructions apply to the following
Accessory listed below:

356-039A STEERING LEVER EXTENSION KIT

Refer to Figure 1:

2. Disassemble steer ing levers (#2) from the steering

Refer to Figure 2:

3. Attach the existing right hand steering lever (#2) and

4. Torque nuts to 35 ft. lbs.

5. Repeat steps 3 & 4 to attach the left hand steering

Manual No. 356-040M

arm mounts (#1). Keepsteering leversandmounting
hardware for reattachment.

Steering Lever Disassembly

Figure 1

new extension bracket (#7) to the steer ing arm
mount (#1) with two existing 3/8"-16 x 1 GR5 hex
head cap screws (#4) and 3/8" flat washers (#3) and
one new 3/8"-16 x 1" GR 5 hex head cap screw (#5),
two 3/8" flat washers (#6) and 3/8" hex nut (#8) as
shown.

lever.

Tools required:

•

Safety Glasses

• Work Gloves

• Two 9/16"box end and/or open end wrenches

Assembly Instructions

Use the detailed listing on the back as a checklist to
inventory parts received for your Steering Lever
Extension Kit. Please contact your local Land Pride
dealer for any missing hardware.

Initial Preparations

1. Park your Riding Mower on a flat surface, move
steering levers to park, turn off engine and remove
ignition key.

© Copyright 2006 Printed

2/13/06

Steering Lever Extension Assembly

Figure 2

1

Listing of Parts

Kit No. 356-039A STEERING LEVER EXTENSION KIT

Qty. Part No. Part Description

2 356-029D STEERING LEVER EXTENSIONS
1 356-040M STEERING LEVER EXT. KIT PAGE
2 802-017C HHCS 3/8-16X1 GR5
2 803-014C NUT HEX 3/8-16 PLT
4 804-012C WASHER FLAT 3/8 SAE PLT

Land Pride

Corporate Office: P.O. Box 5060

Salina, Kansas 67402-5060 USA

www.landpride.com

2

Manual No. 356-040M 2/13/06

■