Land Pride SP20 User Manual

Another helpful tool

in seedbed preparation.

Landscapers, nurseries and general contractors find our
20 and 30 Series Pulverizers ideal for leveling and
seedbed preparation.

Land Pride Soil Pulverizers aggressively rip into crusted
soils with reversible scarifier shanks. The full width
pulverizing roller features 3/8” x 1 1/4” heat treated steel
spikes with replaceable wear sleeves. The down pressure
springs keep the roller in constant contact with the soil
and the leveling H-beam redistributes freshly loosened
soil for an even seedbed.

SP20 SERIES

25 - 35 HP — 60” 72”

• Cat. 1 hitch

www.landpride.com

• Single steel spiked roller with replaceable heat
treated sleeves

24

• Heavy wall round tubing on roller

• Self-aligning cast 1” bearings with double lip seals

• 10” Frame beam

• 1” Diameter shaft in roller

SOIL PULVERIZER

3/8” Steel spikes are welded to
the roller’s surface and feature
replaceable wear sleeves.

Which Pulverizer is right for you

MAXIMUM HORSEPOWER

20 30

SERIES SERIES

35 HP 50 HP

?

Aggressive Scarifier Shanks

10 1/2” x 2” x 1/2” Scarifier shanks
aggressively rip crusted soils, enabling the
steel spiked roller to break down the soil to
a perfect consistency ready for planting.

Not All Pulverizers Are Created Equal!

Steel Spikes — Be sure to look for wear sleeves which extend the life of your roller.
Are the steel spikes easily replaced? Ours are!

Spring Loaded Roller — The spring loaded roller keeps the roller “pushing” towards
the ground for constant pulverizing action. Our springs are set at 32 lb./inch!

Scarifier Shanks — Too wide and they bulldoze, too narrow and they bend or break.
Just right when they are Land Pride! Ours are also reversible for twice the wear life.

SP30 SERIES

30 - 50 HP — 72” 84”

The 30 Series Pulverizer is available with
single or double spiked rollers to break
up tough soil conditions. The second
roller can also be easily added later with
no wasted parts.

• Cat. 1 hitch

• Formed plate A-frame

• Heavy-duty clevis type lower hitch

• Single or double steel spiked roller

• Replaceable heat treated sleeves

• 3/8” steel spikes

• Self-aligning cast 1” bearings
with double lip seals

• 12” H-beam frame

• 1” Diameter shaft in roller

Model/Series
Hitch
H-Beam (mm)
A-Frame (mm)
Working Width (cm)
Weight - with single roller lb. (kg)
Max. Engine HP
Front to Back Length - single roller (cm)
Front to Back Length - double roller (cm)
Height (cm)
No. of Scarifier Shanks
Size of Scarifier Shanks

Shank Spacing (mm)
No. of Spikes - single roller
No. of Spikes - double roller
Spiked Roller Tube Diameter (mm)

Spike Material (mm)
Springs - Front Roller (kg/cm)
Springs - Rear Roller (kg/cm)

Maximum HP Rating based on 2WD specifications.

Soil Pulverizer Specifications

20 Series

Cat. 1

10" (254)

1 /2" x 2 1/2" Flat Bar (12.7 x 63.5)

60" (152) 72" (182)

491 (223) 561 (255)

35 HP
24" (60.9)
32" (81.3)

36 1/2" (92.7)

21 25

10 1/2" x 2" x 1/2" Reversible or,

10 1/2" x 1/2" x 1/2" Reversible

2 13/16" (71.44)

86 103

N/A N/A

5 9/16" O.D. (141.2)

3/8" x 1-1/4" (9.5 x 28.5) Steel, replaceable heat treated sleeves

32 lbs./inch (14.5/2.54)

N/A

25

30 Series

Cat. 1

12" (304.8)

3/8" Plate (9.5)

72" (182) 84" (213)

671 (305) 721 (328)

50 HP
27 1/4" (69.2)
35 1/4" (89.5)
36 1/2" (92.7)

25 29

10 1/2" x 2" x 1/2" Reversible or,

10 1/2" x 1/2" x 1/2" Reversible

2 13/16" (71.44)

103 116
206 232

6 5/8" O.D. (168.2)

(opt. 2nd roller 5 9/16" (141.2)

32 lbs./inch (14.5/2.54)

15 lbs/inch (6.8/2.54)

* See dealer for complete warranty information.

Models may or may not include options.
Design and specifications subject to change without notice.