Land Pride RTR10 Series Features And Benefits

Features and Benefits

Rotary Tillers, Reverse Tine Rotation

RTR10 Series

Features Benefits

American made Many tillers are imported. American made means better parts availability.
Reverse tilling action Reverse action ‘sucks’ tiller into ground, does not walk on top of hard ground like

forward rotation tillers can.

Tractor HP rang e 17-25 HP
Gearbox Warranty 5 Years on housing, seals, & bearings. shows our confidence in the product.
Working widths 42”, 50”, 58” to meet specific customer needs.
6 1/2” Digging depth For deep soil penetration.
Plate steel upper hitch Plate steel is stronger than flat bar type hitch.
Clevis lower hitch Provides additional strength and easy one person hook-up.
Hitch offset capability Offset by moving lower hitch points and gearbox mount to cover right tire track.
Offset Dimensions 42” Width

50” Width
58” Width

Fits Land Pride Quick-Hitch Allows for quick and easy one person hook-up.

Adjustable parking stand Allows for easy hook-up and storage.
Adjustable skid shoes Control depth with seven adjustments.
Formed and reinforced rear

deflector
Front deflector Front deflector is flexible to take the beating from rocks or debris.
4 ‘C’ shaped heat-treated

tines per flange
Solid rotor shaft 1 3/4” Solid steel rotor shaft for strength.
15” Rotor swing diameter For deep tilling and turning the soil over faster.
Double lip seal on rotor bearing Double lip seal helps keep the dirt out and the grease in.
Fully shielded shear pin or

slip-clutch driveline
#80 Drive chain enclosed in oil

bath
Stamped chain cover Stamped forming gives the chain cover strength.

16” - 26” Std. 13” - 29” Max. Right 23” - 19” Max. Left
25” - 25” Std. 18” - 32” Max. Right 32” - 18” Max. Left
29” - 29” Std. 22” - 36” Max. Right 36” - 22” Max. Left

(Offset cannot be used with Quick-Hitch.)

Keeps dirt in and leaves a level finish. Forming gives deflector additional strength.
Adjustable deflector allows for var ious finish results.

‘C’ Shaped tines require less HP to move through the ground.

Protects the gearbox and rotor shaft upon hitting obstructions. Slip-clutch saves
having to replace shear-pins.

Heavy drive chain stretches less, and oil bath keeps wear to a minimum.

Designs, specifications, features and information are subject to change without notice.

16/23/10

311-431F continued on next page

83

Features and Benefits

Rotary Tillers, Reverse Tine Rotation

RTR15 Series

Features Benefits

American made Many tillers are imported. American made means better parts availability.
Reverse tilling action Reverse action ‘sucks’ tiller into ground, does not walk on top of hard ground like

forward rotation tillers can.

Tractor HP Rang e 17 - 50 HP; Dependent upon width and Series of tiller.
Gearbox Warranty 5 Years on housings, seals, bearings. Shows our confidence in the product.
Working widths 50”, 58”, 66” & 74” To meet specific customers needs.
6 1/2” Digging depth For deep soil penetration.
Plate steel upper hitch Plate steel is stronger than flat bar type hitch.
Clevis lower hitch Provides additional strength and easy one person hook-up.
Hitch sideshift capabilities Sideshift tiller to cover right tire track. Gearbox slides with tiller.
Sideshift dimensions 50” Width

58” Width
66” Width
74” Width

Fits Land Pride Quick-Hitch Allows for quick & easy one person hook-up. Offset cannot be used with Quick-Hitch.
Adjustable Parking stand Allows for easy hook-up and storage.
Adjustable skid shoes Control depth with various settings.
Formed and reinforced

rear deflector
Front deflector Front deflector is flexible to take the beating from rocks or debris.
4 ‘C’ Shaped heat-treated

tines per flange
RTR1550 & RTR1558

1 3/4” Solid steel rotor shaft

25” - 25” Std. 12” - 38” Max. Right 31” - 19” Max. Left
29” - 29” Std. 12” - 46” Max. Right 35” - 23” Max. Left
33” - 33” Std. 12” - 54” Max. Right 39” - 27” Max. Left
37” - 37” Std 16” - 58” Max. Right 43” - 31” Max. Left

Forming gives deflector additional strength. Adjustable deflector allows for various
finish results.

‘C’ Shaped tines require less HP to move through the ground.

Solid steel shaft for strength.

RTR1566 & RTR1574
2” Solid steel rotor shaft

15” Rotor swing diameter For deep tilling and turning the soil over faster.
Double lip seal on rotor bearing Double lip seal helps keep the dirt out and the grease in.
Cat. 3 heavy-duty fully shielded

shear pin or slip-clutch driveline
#80 Drive chain

enclosed in oil bath
Stamped chain cover Stamped forming gives the chain cover strength.

Designs, specifications, features and information are subject to change without notice.

Protects gearbox and rotor shaft upon hitting obstructions. Slip-clutch saveshaving to
replace shear-pins.

Heavy drive chain stretches less, and oil bath keeps wear to a minimum.

6/23/10

311-431F end

84