Land Pride RTR1058 User Manual
Specifications & Capacities
Rotary Tillers
RTR10 Series
Model RTR1042 RTR1050 RTR1058
Recommended Tractor PTO HP 17 to 25 Horsepower (25 hp maximum)
Weight 403 lbs. 430 lbs. 474 lbs.
Tilling Width 42" 50" 58"
Overall Width 47 5/16" 55 5/16" 63 5/16"
3-Point Hitch Type Category l, Adjustable Lower Hitch Clevis with Plated Pins
Fits Land Pride Quick-Hitch
Offset Capabilities Yes, Cannot offset with Quick-Hitch
Sideshift Dimensions Centered
Shifted Right
Shifted Left
Number of Tines per Flange 4
Tine Construction Alloy steel heat treated “C” shaped blades
Skid Shoes Adjustable
Storage Stands Adjustable
Rear Deflector Adjustable profile stamped rear deflector
Front Deflector Rubber
Driveline Category II
Gearbox 25 HP input at 540rpm 1.92:1 ratio
Gearbox Lubrication & Oil Capacity 2 Pints of SAE 80-90W EP oil
Drive Chain #80 Roller chain - Fully enclosed in oil bath with drain & fill plugs
Drive Chain Lubrication Shell Alvania EP 00 or equivalent
Sprockets Case hardened teeth, splined bores
Rotor Swing Diameter 15"
Rotor Shaft Speed 225 rpm at 540 rpm PTO
16” - 26”
13” - 29”
23” - 19”
25” - 25”
18” - 32”
32” - 18”
Off-Center Shear bolt - standard
Slip Clutch - optional
Cast iron housing, straight bevel gears
29” - 29”
22” - 36”
36” - 22”
Designs, specifications, features and information are subject to change without notice.
138
311-431S continue on next page
26796
5/10/11
Specifications & Capacities
Rotary Tillers
RTR15 Series
Model RTR1550 RTR1558 RTR1566 RTR1574
Recommended Tractor PTO HP 17-35 HP 20-40 HP 25-50 HP
Weight 455 lbs. 489 lbs. 523 lbs. 557 lbs.
Tilling Width 50" 58" 66” 74”
Overall Width 56 1/4" 64 1/4" 72 1/4” 80 1/4”
3-Point Hitch Type Category l, Adjustable Lower Hitch Clevis with Plated Pins
Fits Land Pride Quick Hitch
Sideshift Capabilities Yes, (Note: Sideshift capability is limited to adjustment of lower left clevis hitch)
Sideshift Dimensions Centered
Shifted Right
Shifted Left
Number of Flanges 6789
Number of Tines per Flange 4
Tine Construction Alloy steel heat treated “C” shaped blades
Skid Shoes Adjustable
Storage Stands Adjustable
Rear Deflector Adjustable profile stamped rear deflector
Front Deflector Rubber
Driveline Category IIl Heavy Duty
Gearbox 50 HP input at 540 rpm 1.92:1 ratio
Gearbox Lubrication & Oil Capacity 2 Pints of SAE 80-90W EP oil
Drive Chain #80 Roller chain - Fully enclosed in oil bath with drain & fill plugs
Drive Chain Lubrication Shell Alvania EP 00 or equivalent
Sprockets Case hardened teeth, splined bores
Rotor Swing Diameter 15"
Rotor Shaft Speed 211 rpm at 540 rpm PTO
25” - 25”
12” - 38”
31” - 19”
29” - 29”
12” - 46”
35” - 23”
Off-Center Shear bolt - standard
Slip Clutch - optional
Cast iron housing, straight bevel gears
33” - 33”
12” - 54”
39” - 27”
37” - 37”
12” - 58”
43” - 31”
Designs, specifications, features and information are subject to change without notice.
139
311-431S end
26798
5/10/11
Loading...