Land Pride RTA25 User Manual

Features and Benefits

Rotary Tillers, Standard Tine Rotation

RTA25 & RTA35 Series

Features Benefits

Working widths (RTA25 = 62” & 70”) And (RTA35 = 76”) To meet specific customer needs
Tractor HP Rang e (RTA25 = 25 - 55 HP) And (RTA35 = 35 - 75 HP)
Fits Land Pride

Quick-Hitch
Offset capability Offset 5” by moving lower hitch points to cover r ight tire track.
Parking stand Allows for easy hook-up and storage.
Stamped top hitch Stamped plate adds additional strength to hitch.
Hitch bolted to

inside of support
8” Digging depth For extra deep soil penetration and cultivation.
Four or six tines per flange Six tines go through the ground better than four.
Rotor swing diameter (RTA25 = 17”) And (RTA35 = 19”) For deep tilling action and turning the soil over faster.
Double lip seal on rotor

bearings
#100 Drive chain

enclosed in oil bath
Stamped chain cover Stamped forming adds additional strength.
Adjustable skid shoes Control depth with various settings.
Wear shield or left skid shoe Shield protects lower portion of chain cover from wearing due to dragging in the soil.
Cat. 3 driveline with

shear bolt or slip-clutch
Rear gate down pressure

springs (optional)
Formed rear deflector with

springs

Allows for quick and easy one person hook-up. Offset can not be used with Quick-Hitch.

Force is applied downward on top hitch, by bolting hitch to inside of support. Keeps hitch
from ‘spreading’ outward.

Double lip seal helps keep the dirt out and the grease in.

Heavy-duty drive chain reduces stretching, oil keeps constant lubrication and holds wear
to a minimum.

Heavy driveline for rough conditions. Shear-bolt or slip-clutch protects other drive train
components. Slip-clutch saves having to replace shear bolts.

Forces the rear gate down to level even better. Easy-to-adjust chain tightener Cast iron
chain tightener is a simple bolt adjustment to keep constant tension on the chain.

Forming gives deflector additional strength. Springs allow deflector to '‘bounce'’ when
obstructions are hit.

Designs, specifications, features and information are subject to change without notice.

311-254F

70 311-254F04/17/07