Land Pride RTA2072 User Manual
Specifications & Capacities
Rotary Tillers
RTA20 Series
RTA2064 RTA2072
Recommended Tractor PTO HP 23-50 Horsepower (50 hp maximum)
Weight 689 lbs. 734 lbs.
Tilling Width 64" 72"
Overall Width 70 13/16" 77 7/8"
3-Point Hitch Type Category I, Adjustable Lower Hitch Clevis with Plated Pins
Fits land Pride Quick-Hitch
Sideshift Capabilities 14"
Note: Limited sideshift capabilities with Land Pride Quick-Hitch
Number of Flanges 8
Number of Tines per Flange 6
Tine Construction Alloy steel heat treated “C” shaped blades
Skid Shoes Adjustable
Storage Stands Adjustable
Rear Deflector Adjustable profile stamped rear deflector
Driveline ASAE Category III Heavy Duty
Off-Center Shear bolt - standard
Slip Clutch - optional
Gearbox 50 HP Input at 540 rpm 1.46:1 Ratio
Cast Iron Housing, Straight Bevel Gears
Gearbox Lubrication Capacity & Type 2.2 Pints of SAE80-90W EP oil
Drive Chain #80 Roller chain - Fully enclosed in oil bath with drain & fill plugs
Drive chain lubricant Shell Alvania EP 00 or equivalent
Sprockets Splined Bores
Rotor Swing Diameter 17"
Rotor Shaft Speed 220 rpm at 540 rpm PTO
18"
9
40 5/8"
RTA2072 = 77 7/8"
RTA2064 = 70 13/16"
Designs, specifications, features and information are subject to change without notice.
150
311-328S continue on next page
33 3/4"
26799
6/11/12
Specifications & Capacities
Rotary Tillers
RTR20 Series
RTR2064 RTR2072
Recommended Tractor PTO HP 23-50 Horsepower (50 hp maximum)
Weight 748 lbs. 795 lbs.
Tilling Width 64" 72"
Overall Width 70 13/16" 77 7/8"
3-Point Hitch Type Category I, Adjustable Lower Hitch Clevis with Plated Pins
Fits land Pride Quick-Hitch
Sideshift Capabilities 14"
Note: Limited sideshift capabilities with Land Pride Quick-Hitch
Number of Flanges 8
Number of Tines per Flange 6
Tine Construction Alloy steel heat treated “C” shaped blades
Skid Shoes Adjustable
Storage Stands Adjustable
Rear Deflector Adjustable profile stamped rear deflector
Driveline ASAE Category III Heavy Duty
Off-Center Shear bolt - standard
Slip Clutch - optional
Gearbox 50 HP Input at 540 rpm 1.46:1 Ratio
Cast Iron Housing, Straight Bevel Gears
Gearbox Lubrication Capacity & Type 2.2 Pints of SAE80-90W EP oil
Drive Chain #80 Roller chain - Fully enclosed in oil bath with drain & fill plugs
Drive chain lubricant Shell Alvania EP 00 or equivalent
Sprockets Splined Bores
Rotor Swing Diameter 17"
Rotor Shaft Speed 220 rpm at 540 rpm PTO
18"
9
40 5/8"
RTR2072 = 77 7/8"
RTR2064 = 70 13/16"
Designs, specifications, features and information are subject to change without notice.
151
33 3/4"
33 3/4"
311-328S end
26799
6/11/12
Loading...