Land Pride RTA1050 User Manual
Specifications & Capacities
Rotary Tillers
RTA10 Series
RTA1042 RTA1050 RTA1058
Recommended Tractor PTO HP 17 to 25 Horsepower (25 HP maximum)
Weight 358 lbs. 385 lbs. 415 lbs.
Tilling Width 42" 50" 58"
Overall Width 47 1/4" 55 1/4" 63 1/4"
3-Point Hitch Type Category l, Adjustable Lower Hitch Clevis with Plated Pins
Fits Land Pride Quick-Hitch
Offset Capabilities Yes, Cannot offset with Quick-Hitch
Sideshift Dimensions Centered
Shifted Right
Shifted Left
Number of flanges 567
Number of Tines per Flange 4
Tine Construction Alloy steel heat treated “C” shaped blades
Skid Shoes Adjustable
Storage Stands Adjustable
Rear Deflector Adjustable profile stamped rear deflector
Driveline Category II
Gearbox Construction 25 HP input at 540rpm 1.5:1 ratio
Lubrication Gear Lube 80-90W EP
Capacity 2 pints
Drive Chain #80 Roller chain - Fully enclosed in oil bath with drain & fill plugs
Drive Chain Lubrication Shell Alvania EP 00 or equivalent
Sprockets Case hardened teeth, splined bores
Rotor Swing Diameter 15"
Rotor Shaft Speed 225 rpm at 540 rpm PTO
16” - 26”
16” - 26”
23” - 19”
25” - 25”
18” - 32”
32” - 18”
Off-Center Shear bolt - standard
Slip Clutch - optional
Cast iron housing, straight bevel gears
29” - 29”
22” - 36”
36” - 22”
Designs, specifications, features and information are subject to change without notice.
136
311-252S continue on next page
26982
5/10/11
Specifications & Capacities
Rotary Tillers
RTA15 Series
RTA1550 RTA1558 RTA1566 RTA1574
Recommended Tractor PTO HP 17 to 35 HP 20-40 HP 25-50 HP
Weight 412 lbs. 444 lbs. 476 lbs. 508 lbs.
Tilling Width 50" 58" 66” 74”
Overall Width 56 1/4" 64 1/4" 72 1/4” 80 1/4”
Hitch Type Category l, Adjustable Lower Hitch Clevis with Plated Pins
Fits Land Pride Quick Hitch
Sideshift Capabilities Yes, Works with Land Pride Quick-Hitch
Sideshift Dimensions Centered
Shifted Right
Shifted Left
Number of Flanges 6789
Number of Tines per Flange 4
Tine Construction Alloy steel heat treated “C” shaped blades
Skid Shoes Adjustable
Storage Stands Adjustable
Rear Deflector Adjustable profile stamped rear deflector
Driveline Category IIl Heavy Duty
Gearbox Construction 50 HP input at 540 rpm 1.92:1 ratio
Lubrication Gear Lube 80-90W EP
Capacity 2 pints
Drive Chain #80 roller chain - Fully enclosed in oil bath with drain & fill plugs
Drive Chain Lubrication Shell Alvania EP 00 or equivalent
Sprockets Case hardened teeth, splined bores
Rotor Swing Diameter 15"
Rotor Shaft Speed 211 rpm at 540 rpm PTO
25” - 25”
12” - 38”
31” - 19”
29” - 29”
12” - 46”
35” - 23”
Off-Center Shear bolt - standard
Friction Clutch - optional
Cast iron housing, straight bevel gears
33” - 33”
12” - 54”
39” - 27”
37” - 37”
16” - 58”
43” - 31”
Designs, specifications, features and information are subject to change without notice.
137
311-252S end
26983
5/10/11
Loading...