Land Pride RTA10 User Manual

Rotary Tillers,
Standard Tine Rotation

Features and Benefits

Rotary Tillers, Standard Tine Rotation

RTA10 Series

Features Benefits

Working widths 42”, 50”, 58” to meet a wide range of abdications and needs.
Gearbox Warranty 5 Years on housing, gears, seals, and bearings. shows our confidence in the product.
Tractor HP range 17-25 HP
Fits Land Pride

Quick-Hitch
Formed and reinforced rear

deflector
Clevis hitch Provides additional strength and easy one person hook-up.
Adjustable lower hitches Offset unit to cover right tire track.
Skid shoes Control depth with seven adjustments.
6 1/2” Digging depth For deep soil penetration.
Adjustable Parking stand Easy hook-up and storage.
Plate steel hitch Plate steel is stronger than flat bar type hitch
4 ‘C’ shaped tines per flange ‘C’ Shaped tines require less HP to move through the ground.
Solid rotor shaft 1 3/4” Solid steel rotor shaft for strength.
15” Rotor swing diameter For deep tilling and turning the soil over faster.
#80 Drive chain enclosed in oil bath Heavy drive chain stretches less, and oil bath keeps wear to a minimum.
Stamped chain cover Stamped forming gives the chain cover strength.
Fully shielded shear pin or slip-

clutch driveline
American made Many tillers are imported. American made means better parts availability.
Double lip seal on rotor bearing Double lip seal helps keep the dirt out and the grease in.

42” width 16”-26” std. 13”-29” Maximum Right 23”-19” Maximum Left

Offset Dimensions 50” width 25”-25” std. 18”-32” Maximum Right 32”-18” Maximum Left

58” width 29”-29” std. 22”-36” Maximum Right 36”-22” Maximum Left

Allows for quick and easy one person hook-up. Does not offset with Quick-Hitch.

Keeps dirt in and leaves a level finish. Forming gives deflector additional strength.
Adjustable deflector allows for various finish results.

Protects the gearbox and rotor shaft upon hitting obstructions. Slip-clutch saveshaving
to replace shear-pins.

Designs, specifications, features and information are subject to change without notice.

4/08/08

311-252F continued on next page

66

Features and Benefits

Rotary Tillers, Standard Tine Rotation

RTA15 Series

Features Benefits

Working widths 50”, 58” to meet specific customer needs.
Tractor HP range 17 - 35 HP
Gearbox warranty 5 Year on housing, gears, seals and bearings. Shows our confidence in the product.
Fits Land Pride Quick-Hitch Allows for quick and easy one person hook-up. Cannot be used with sideshift.
Sideshift capabilities Sideshift tiller to cover right tire track. Gearbox slides with tiller.
Sideshift dimensions 50” 25-25 Std.; 12-38 Max. right; 31-19 Max. left
Sideshift dimensions 58” 29-29 Std.; 12-46 Max. right; 35-12 Max. left
Formed and reinforced

rear deflector
Clevis hitch Provides additional strength and easy one person hook-up.
Skid Shoes Control depth with various settings.
6 1/2” Digging depth For deep soil penetration.
Adjustable Parking Stand Easy hook-up and storage.
Plate steel hitch Plate steel is stronger than flat bar type hitch.
4 ‘C’ Shaped heat-treated

tines per flange
Solid rotor shaft 1 3/4” Solid steel shaft for strength.
Cat. 3 Driveline Cat. 3 Driveline with heavy-duty shear-bolt or slip-clutch
15” Rotor swing diameter For deep tilling and turning the soil over faster.
Double lip seal on rotor bearing Double lip seal helps keep the dirt out and the grease in.
#80 Drive chain

enclosed in oil bath
Stamped chain cover Stamped forming gives the chain cover strength.
Fully shielded shear pin

or slip-clutch driveline

Forming gives deflector additional strength. Adjustabledeflectorallowsfor various finish
results.

‘C’ Shaped tines require less HP to move through the ground.

Heavy drive chain stretches less, and oil bath keeps wear to a minimum.

Protects the gearbox and rotor shaft upon hitting obstructions. Slip-clutch saves having
to replace shear-pins.

Designs, specifications, features and information are subject to change without notice.

4/08/08

311-252F end

67