Land Pride RCR2684, RCR2560, RCR2572, RCR2584 User Manual

Table of Contents Part Number Index

Rotary Cutter

RCR2560, RCR2572, RCR2584 & RCR2684

13453

312-459P

Parts Manual

Read the Operator's manual entirely. When
you see this symbol, the subsequent
instructions and warnings are serious - follow
without exception. Your life and the lives of
others depend on it!

© Copyright 2009 Printed 02/12/09

Cover photo may show optional equipment not
supplied with standard unit.

Table of Contents Part Number Index

Table of Contents

Section 1: Introduction.................................................4

Using This Manual...............................................................4

Manual Replacement Information.......................................4

Manual Revisions................................................................4

Touch-up Paint....................................................................4

Hardware Legend................................................................5

Replacement Hardware......................................................5

Serial Numbers...................................................................5

Part Number Service Coding..............................................5

Section 2: Decks............................................................6

Check Chain........................................................................6

Check Chain........................................................................8

Deck..................................................................................10

Deck..................................................................................14

Driveline & Bearing Support..............................................16

Hitch 3-Point Quick S/N 584254-......................................18

Hitch 3-Point Quick S/N 584255+......................................20

Hitch A-Frame S/N 584254-..............................................22

Hydraulic Lift.....................................................................24

Rear Axle..........................................................................26

Tailwheel...........................................................................28

Tailwheel Dual...................................................................30

Tailwheel Single................................................................32

Tongue..............................................................................34

Section 3: Guards........................................................36

Guard Front Chain.............................................................36

Guard Front Rubber..........................................................38

Guard Front Safety Chain.................................................40

Guard Front Safety Rubber...............................................42

Guard Rear Chain.............................................................44

Guard Rear Safety Chain..................................................46

Section 4: Drivelines...................................................48

Driveline (826-146C) EC New Shields..............................48

Driveline (826-146C) EC Old Shields................................50

Driveline (826-147C) EC New Shields..............................52

Driveline (826-147C) EC Old Shields................................54

Driveline Fixed Shaft (826-151C) EC New Shielding........56

Driveline Fixed Shaft (826-151C) EC Old Shielding..........58

Driveline Jackshaft (826-152C) EC New Shielding...........60

Driveline Jackshaft (826-152C) EC Old Shielding.............62

Driveline Lift Type Cutter (826-150C) EC New Shielding...64

Driveline Lift Type Cutter (826-150C) EC Old Shielding.....66

Driveline Slip Clutch (1466030).........................................68

Driveline Slip Clutch (1466030).........................................70

Section 5: Gearboxes..................................................72

Gearbox (826-035C) ITG (S/N 160730 to 191029)...........72

Gearbox (826-035C) OMNI (S/N 160729-).......................74

Gearbox (826-035C) OMNI (S/N 191030+)......................76

Gearbox (826-038C) OMNI...............................................78

Gearbox (826-377C) Comer.............................................80

Section 6: Hydraulics..................................................82

Hydraulic Cylinder (810-200C) Midway.............................82

Hydraulic Cylinder (810-200C) Red Lion..........................84

Section 7: Labels.........................................................86

Label Placement...............................................................86

Label Placement...............................................................88

Part Number Index.......................................................90

© Copyright 2009. All rights reserved.

Land Pride provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual,
Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land
Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect
the product in the future. The illustrations in this manual are not intended for safe and proper assembly or disassembly of equipment. The illustrations are intended for
ordering parts only.

All other brands and product names are trademarks or registered trademarks of their respective holders.

2 RCR2560, RCR2572, RCR2584 & RCR2684 Rotary Cutter 312-459P 02/12/09

Land Pride is registered trademark.

Printed in the United States of America.

Table of Contents Part Number Index

C

Check Chain...................................................................6

Check Chain...................................................................8

D

Deck.............................................................................10

Deck.............................................................................14

Driveline & Bearing Support.........................................16

Driveline (826-146C) EC New Shields.........................48

Driveline (826-146C) EC Old Shields...........................50

Driveline (826-147C) EC New Shields.........................52

Driveline (826-147C) EC Old Shields...........................54

Driveline Fixed Shaft (826-151C) EC New Shielding....56

Driveline Fixed Shaft (826-151C) EC Old Shielding.....58

Driveline Jackshaft (826-152C) EC New Shielding......60

Driveline Jackshaft (826-152C) EC Old Shielding........62

Driveline Lift Type Cutter (826-150C) EC New

Shielding................................................................64

Driveline Lift Type Cutter (826-150C) EC Old

Shielding................................................................66

Driveline Slip Clutch (1466030)....................................68

Driveline Slip Clutch (1466030)....................................70

Alphabetized Table of Contents

G

Gearbox (826-035C) ITG (S/N 160730 to 191029)......72

Gearbox (826-035C) OMNI (S/N 160729-)..................74

Gearbox (826-035C) OMNI (S/N 191030+).................76

Gearbox (826-038C) OMNI..........................................78

Gearbox (826-377C) Comer.........................................80

Guard Front Chain........................................................36

Guard Front Rubber.....................................................38

Guard Front Safety Chain.............................................40

Guard Front Safety Rubber..........................................42

Guard Rear Chain........................................................44

Guard Rear Safety Chain.............................................46

H

Hitch 3-Point Quick S/N 584254-..................................18

Hitch 3-Point Quick S/N 584255+.................................20

Hitch A-Frame S/N 584254-.........................................22

Hydraulic Cylinder (810-200C) Midway........................82

Hydraulic Cylinder (810-200C) Red Lion......................84

Hydraulic Lift.................................................................24

L

Label Placement..........................................................86

Label Placement..........................................................88

R

Rear Axle.....................................................................26

T

Tailwheel......................................................................28

Tailwheel Dual..............................................................30

Tailwheel Single...........................................................32

Tongue.........................................................................34

02/12/09 RCR2560, RCR2572, RCR2584 & RCR2684 Rotary Cutter 312-459P 3

Table of Contents Part Number Index

4 RCR2560, RCR2572, RCR2584 & RCR2684 Rotary Cutter 312-459P 02/12/09

Table of Contents Part Number Index

02/12/09 RCR2560, RCR2572, RCR2584 & RCR2684 Rotary Cutter 312-459P 5

Land Pride Section 2: Decks

Table of Contents Part Number Index

Check Chain

Applies to RCR2560, RCR2572

13503

6 RCR2560, RCR2572, RCR2584 & RCR2684 Rotary Cutter 312-459P 02/12/09

Section 2: Decks Land Pride

Table of Contents Part Number Index

Check Chain

Applies to RCR2560, RCR2572

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg13503
CHECK CHAIN ASSY312-071A
CHECK CHAIN MT - TRACTOR312-136D1.
CHECK CHAIN WLDM'T312-062H2.
PLUG CAP 1 3/8 X 3/4817-057C3.
HHCS 3/4-10X1 1/2 GR5802-184C4.
WASHER LOCK SPRING 3/4 PLT804-023C5.
NUT HEX 3/4-10 PLT803-027C6.

02/12/09 RCR2560, RCR2572, RCR2584 & RCR2684 Rotary Cutter 312-459P 7

Land Pride Section 2: Decks

Table of Contents Part Number Index

Check Chain

Applies to RCR2584, RCR2684

14378

8 RCR2560, RCR2572, RCR2584 & RCR2684 Rotary Cutter 312-459P 02/12/09

Section 2: Decks Land Pride

Table of Contents Part Number Index

Check Chain

Applies to RCR2584, RCR2684

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg14378
CHECK CHAIN MT - TRACTOR312-136D1.
CHECK CHAIN WLDM'T312-062H2.
PLUG CAP 1 3/8 X 3/4817-057C3.
HHCS 3/4-10X1 1/2 GR5802-184C4.
WASHER LOCK SPRING 3/4 PLT804-023C5.
NUT HEX 3/4-10 PLT803-027C6.

02/12/09 RCR2560, RCR2572, RCR2584 & RCR2684 Rotary Cutter 312-459P 9

Land Pride Section 2: Decks

Table of Contents Part Number Index

Deck

Applies to RCR2560, RCR2572

15872

10 RCR2560, RCR2572, RCR2584 & RCR2684 Rotary Cutter 312-459P 02/12/09

Section 2: Decks Land Pride

Table of Contents Part Number Index

Deck

Applies to RCR2560, RCR2572

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg15872

(S/N 232953-)NUT WING 3/8-16 PLT803-231C1.
(S/N 232953-)SHIELD WELDMENT312-399H2.
(S/N 232953-)SHIELD MOUNT BRACKET WELDMENT312-400H3.
(S/N 232953-)WASHER LOCK SPRING 3/8 PLT804-013C4.

(S/N 232953-)HHCS 5/16-18X1 GR5802-159C5.
WASHER LOCK SPRING 5/16 PLT804-009C6.
GEARBOX RC61SS 1:1.46 INCREASE826-035C7.
NUT HEX FLG TOP LK 3/4-10 PLT803-299C8.

RCR2572BLADE BOLT ACCESS COVER312-611D9.

RCR2560BLADE BOLT ACCESS COVER312-647D9.

Rev 2; Use up stockNUT LOCK 5/8-11 PLT803-024C10.
Rev 1; Use up stockNUT HEX 5/8-11 PLT803-021C10.
Rev 1; Use up stockReplaced by 803-024CWASHER LOCK SPRING 5/8 PLT804-022C11.

Rev 1; Use up stockReplaced by 803-024CWASHER FLAT 5/8 SAE PLT804-021C12.
RCR2572HITCH STRAP312-608D13.
RCR2560HITCH STRAP312-646D13.

Rev. 2HHCS 5/8-11X1 1/2 GR5802-051C14.

Rev 1; Use up stockHHCS 5/8-11X1 3/4 GR5802-053C14.

NUT LOCK 3/8-16 PLT803-013C15.

(S/N 286260+)HHCS 3/4-10X2 GR5802-064C16.

Rev 2; Use up stock(S/N 286259-)HHCS 3/4-10X2 1/2 GR5802-212C16.

Rev 1; Use up stockHHCS 3/4-10X2 1/4 GR5802-065C16.

SKID SHOE312-602D17.
PLOW 3/8-16X1 1/4 GR5802-466C18.
NUT HEX TOP LOCK 1 1/8-12 PLT.803-170C19.
WASHER FLAT 1 HARD ASTMF436 PN804-147C20.

RCR257227 OVAL DISHPAN WELDMNT(OMNI)312-388H21.
RCR256015 ROUND DISHPAN WLDMNT(OMNI)312-404H21.
Standard (Quantity 2 per cutter)CUTTER BLADE 1/2 X 4 X 25 CCW820-137C22.

CUTTER BLADE 1/2X4X25 LL CCW820-193C22.

BLADE BOL 1 1/8-12X3 7/16 W/KY802-277C23.
WASHER FLAT 3/8 SAE PLT804-012C24.
NUT HEX SLOTTED 1-14803-095C25.
PIN COTTER 3/16 X 1 3/4 PLT805-017C26.
HHCS 3/4-10X2 GR5802-064C27.
PIN HITCH CAT. 2-1 FORGED805-163C28.

RCR2560 DECK WELDMENT312-402H29.

HITCH BRACE312-607D33.
PIN CLEVIS 3/4 X 3 1/2 PLT805-142C34.
PW PIVOT TUBE LONG122-076D35.
PIN HAIR COTTER .120 PLT805-143C36.
HHCS 3/4-10X6 GR5802-070C37.
SPACER TUBE 1 1/8 OD X 3 1/8312-610D38.
PIVOTINGUPPER HITCH312-609D39.

BUSHING 7/8ID X1 1/8OD,1 3/4LG827-010C41.

FLAT WASHER 1 SPECIAL804-070C43.
BLADE SPACER 20 GA.312-089D44.

Optional Low Lift Blade (Quantity 2
per cutter)

ShownRCR2572 DECK WELDMENT312-386H29.

RPBY 803-026CWASHER FLAT 3/4 SAE PLT804-025C30.
RPBY 803-026C (S/N 286259-)WASHER LOCK SPRING 3/4 PLT804-023C31.

Rev. 2(S/N 286260+)NUT LOCK 3/4-10 PL803-026C32.

Rev 1; Use up stock(S/N 286259-)NUT HEX 3/4-10 PLT803-027C32.

(S/N 220346-)GEARBOX SHAFT PROTECTOR817-050C40.

(S/N 232954-)WASHER FLAT 5/16 SAE PLT804-036C42.

(S/N 232954+)LARGE SHAFT CONE W ACCESS DOOR826-222C45.
(S/N 232954+)HHCS 5/16-18X3/4 GR5802-007C46.

02/12/09 RCR2560, RCR2572, RCR2584 & RCR2684 Rotary Cutter 312-459P 11

Land Pride Section 2: Decks

Table of Contents Part Number Index

Deck (continued)

Applies to RCR2560, RCR2572

RevisionCommentsPart DescriptionPart No.Ref.

(S/N 232954+)WASHER FLAT 5/16 USS PLT804-010C47.
WASHER FLAT 3/4 SAE PLT804-025C48.
MCCN ACCESS COVER38/1149.

(S/N 317416+)DRIVELINE HOOK HANGER W/HRDWR800-320C50.

RCR2572PTO CAT. 4 X 39.7 SLIP CLUTCH826-146C51.

RCR2560AX6 DRIVELINE WITH SLIP CLUTCH826-147C51.

12 RCR2560, RCR2572, RCR2584 & RCR2684 Rotary Cutter 312-459P 02/12/09

Section 2: Decks Land Pride

Table of Contents Part Number Index

Deck (continued)

Applies to RCR2560, RCR2572

This Page Intentionally Left Blank

02/12/09 RCR2560, RCR2572, RCR2584 & RCR2684 Rotary Cutter 312-459P 13

Land Pride Section 2: Decks

Table of Contents Part Number Index

Deck

Applies to RCR2584, RCR2684

15881

14 RCR2560, RCR2572, RCR2584 & RCR2684 Rotary Cutter 312-459P 02/12/09

Section 2: Decks Land Pride

Table of Contents Part Number Index

Deck

Applies to RCR2584, RCR2684

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg15881

(S/N 232953-)SHIELD WELDMENT312-399H1.
(S/N 232953-)WASHER FLAT 3/8 SAE PLT804-012C2.
(S/N 232953-)NUT WING 3/8-16 PLT803-231C3.
(S/N 232953-)WASHER LOCK SPRING 3/8 PLT804-013C4.
Used on Omni Gearbox onlyFLAT WASHER 1 SPECIAL804-070C5.
Used on Comer Gearbox onlyCO BLANK WASHER0.139.7101.005.

Rev. 1Comer Box (SN 381566+)GBOX RC25 1.38-6 1:1.21 STD.826-377C6.

GBOX 1.38-6 1:1.21 STD. ORANGE826-377C826.

Rev. 2Omni Box (SN 381565-)GEARBOX RC61SS 1:1.21 INCREASE826-038C6.

(S/N 232953-)HHCS 5/16-18X1 GR5802-159C7.

NUT HEX FLG TOP LK 3/4-10 PLT803-299C8.

(S/N 220346-)GEARBOX SHAFT PROTECTOR817-050C9.
(S/N 232953-)WASHER FLAT 5/16 SAE PLT804-036C10.

WASHER LOCK SPRING 5/16 PLT804-009C11.

(S/N 232953-)SHIELD MOUNT BRACKET WELDMENT312-400H12.
(S/N 584255+)RCR2684 DECK326-114H13.

RCR2684 DECK ORANGE326-114H8213.

(S/N 584254-)RCR2584 DECK WELDMENT312-419H13.
RCR25/2684 DECK WMT ORANGE312-419H8213.
NUT LOCK 3/8-16 PLT803-013C14.
PLOW 3/8-16X1 1/4 GR5802-466C15.
NUT HEX TOP LOCK 1 1/8-12 PLT.803-170C16.
WASHER FLAT 1 1/8 HARD ASTMF436 PN804-147C17.

Used with Omni or Comer Box27 DISHPAN WLDMT LG.HUB312-818H18.

Standard (Quantity 2 per cutter)CUTTER BLADE 1/2 X 4 X 31 CCW820-138C19.
CUTTER BLADE 1/2X4X31 LL CCW820-194C19.

BLADE BOL 1 1/8-12X3 7/16 W/KY802-277C20.

PIN COTTER 3/16 X 1 3/4 PLT805-017C22.

PIN LYNCH 7/16 X 1 3/4805-103C24.
ACCESS COVER PLATE312-812D25.
ACCESS COVER PLATE ORANGE312-812D8225.
RPBY 312-812D312-611D25.
SKID SHOE312-602D26.
SKID SHOE ORANGE312-602D8226.

BLADE SPACER 20 GA.312-089D28.

MCCN ACCESS COVER38/1132.

Optional Low Lift Blade (Quantity 2

per cutter)

Used on Omni Gearbox onlyNUT HEX SLOTTED 1-14803-095C21.

Used on Comer Gearbox onlyCO NUT, CASTLE M30 X 28.2.2.0055521.

(S/N 584255+)PIN HITCH CAT. II - III326-204D23.

(S/N 584254-)HITCH PIN300-236D23.

(S/N 558465+)HHCS 3/4-10X2 1/4 GR5802-065C27.

(S/N 558464-)HHCS 3/4-10X2 GR5802-064C27.

(S/N 232954+)LARGE SHAFT CONE W ACCESS DOOR826-222C29.

(S/N 232954+)HHCS 5/16-18X3/4 GR5802-007C30.

(S/N 232954+)WASHER FLAT 5/16 USS PLT804-010C31.

Used on RCR2684 S/N 538584+HHCS 1/4-20X1 GR5802-005C33.

Used on RCR2684 S/N 538584+MANUAL STORAGE CONTAINER816-504C34.

Used on RCR2684 S/N 538584+WASHER FLAT 1/4 SAE PLT804-007C35.

Used on RCR2684 S/N 538584+NUT HEX NYLOCK 1/4-20803-255C36.

3-Point MountPTO CAT. 4 X 43.7 SLIP CLUTCH826-150C37.

Pull TypePTO CAT. 4 X 20.5 FIXED 540826-151C38.

Pull TypePTO CAT. 4 X 49.21 JACKSHAFT826-152C39.

02/12/09 RCR2560, RCR2572, RCR2584 & RCR2684 Rotary Cutter 312-459P 15

Land Pride Section 2: Decks

Table of Contents Part Number Index

Driveline & Bearing Support

Applies to RCR2584, RCR2684

14040

16 RCR2560, RCR2572, RCR2584 & RCR2684 Rotary Cutter 312-459P 02/12/09

Section 2: Decks Land Pride

Table of Contents Part Number Index

Driveline & Bearing Support

Applies to RCR2584, RCR2684

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg14040
PTO CAT. 4 X 20.5 FIXED826-151C1.
NUT LOCK 3/8-16 PLT803-013C2.
FLANGETTE 72 MST PLATED822-099C3.
NUT LOCK 1/2-13 PLT803-019C4.
BEARING SUPPORT312-714D5.
PIPE 1/2 SCH. 40 X 4 15/16312-715D6.
BRG 1 3/8 B X 72MM OD W/COLLAR822-098C7.
RHSNB 3/8-16X1 GR5802-015C8.
PTO CAT. 4 X 49.21 JACKSHAFT826-152C9.
HHCS 1/2-13X7 GR5802-260C10.
HHCS 5/8-11X7 1/2 GR5802-146C11.
WASHER FLAT 5/8 SAE PLT804-021C12.
TUBE 1 OD X 9/16 LG. X 5/32WL312-716D13.
RPBY 312-681S312-422H14.
NUT HEX 5/8-11 PLT803-021C15.
WASHER LOCK SPRING 5/8 PLT804-022C16.

(S/N 292594-)WASHER FLAT 3/8 SAE PLT804-012C17.

(S/N 292595+)BEARING FLANGE312-999D18.

(S/N 292595+)BRG 1 3/8 B X 72MM OD W/COLLAR822-100C19.

(S/N 292595+)SNAP RING INT 2.835800-069C20.

(S/N 292595+)TUBE 1 OD X 11/16 LG. X 5/32w326-002D21.

(S/N 292595+)HHCS 5/8-11X7 1/2 GR5802-146C22.

(S/N 292595+)HHCS 1/2-13X7 GR5802-260C23.

(S/N 292595+)BEARING SUPPORT312-833D24.

Includes items 18, 19 & 20BEARING FLANGE ASSY.312-681S25.

02/12/09 RCR2560, RCR2572, RCR2584 & RCR2684 Rotary Cutter 312-459P 17

Land Pride Section 2: Decks

Table of Contents Part Number Index

Hitch 3-Point Quick S/N 584254-

Applies to RCR2584, RCR2684

16440

18 RCR2560, RCR2572, RCR2584 & RCR2684 Rotary Cutter 312-459P 02/12/09

Section 2: Decks Land Pride

Table of Contents Part Number Index

Hitch 3-Point Quick S/N 584254-

Applies to RCR2584, RCR2684

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg16440
PIN CLEVIS 1 X 3 3/16 LG805-090C1.
A-FRAME HITCH RH.312-813D2.
PIN CLEVIS 1 X 2 PLT805-137C3.
HHCS 3/4-10X1 1/2 GR5802-184C4.
REAR BRACE SHORT312-822D5.
REAR BRACE LONG312-829D6.
CAT 0 SPACER300-312D7.
WASHER FLAT 5/8 SAE PLT804-021C8.
NUT HEX TOP LOCK 5/8-11 PLT803-271C9.
PIN COTTER 3/16 X 1 3/4 PLT805-017C10.
WASHER FLAT 1 SAE804-029C11.
NUT LOCK 3/4-10 PLT803-026C12.
HHCS 5/8-11X2 GR5802-055C13.
NUT HEX TOP LOCK 1-8 PLT803-168C14.
A-FRAME HITCH LH.312-814D15.
BUSHING 1 1/4ODX1 1/32IDX2LG312-821D16.
HHCS 1-8X4 GR5802-073C17.
BUSHING 1 OD X 3/4 ID X 5/8 LG890-352C18.
WASHER FLAT 3/4 SAE PLT804-025C19.
HHCS 3/4-10X2 1/4 GR5802-065C20.

(S/N 538584+)HHCS 1/4-20X1 GR5802-005C21.

(S/N 538584+)MANUAL STORAGE CONTAINER816-504C22.

(S/N 538584+)WASHER FLAT 1/4 SAE PLT804-007C23.

(S/N 538584+)NUT HEX 1-8 LH PLT803-255C24.

02/12/09 RCR2560, RCR2572, RCR2584 & RCR2684 Rotary Cutter 312-459P 19

Land Pride Section 2: Decks

Table of Contents Part Number Index

Hitch 3-Point Quick S/N 584255+

Applies to RCR2684

26623

20 RCR2560, RCR2572, RCR2584 & RCR2684 Rotary Cutter 312-459P 02/12/09

Section 2: Decks Land Pride

Table of Contents Part Number Index

Hitch 3-Point Quick S/N 584255+

Applies to RCR2684

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg26623
CAT 0 SPACER300-312D1.
BSHG 1 1/4ODX1 1/32IDX2 1/16LG312-821D2.
HITCH STRAP LH326-193D3.
REAR BRACE326-194D4.
HITCH STRAP RH326-196D5.
REAR BRACE HINGE326-206D6.
SPACER 1 1/4ODX13/16IDX1 1/32326-207D7.
PIN, STOP326-208D8.
HHCS 5/8-11X2 GR5802-055C9.
HHCS 3/4-10X4 GR5802-068C10.
HHCS 1-8X4 1/2 GR5802-098C11.
NUT HEX 1-8 PLT803-031C12.
NUT HEX 1 1/4-12 PLT TOP LOCK803-180C13.
NUT HEX FLANGE LOCK 3/4-10 PLT803-181C14.
NUT HEX TOP LOCK 5/8-11 PLT803-271C15.
WASHER FLAT 5/8 SAE PLT804-021C16.
WASHER FLAT 3/4 SAE PLT804-025C17.
WASHER LOCK SPRING 1 PLT804-027C18.
WASHER FLAT 1 1/4 SAE PLT804-039C19.
PIN COTTER 1/8 X 1 1/4 PLT805-109C20.

02/12/09 RCR2560, RCR2572, RCR2584 & RCR2684 Rotary Cutter 312-459P 21

Land Pride Section 2: Decks

Table of Contents Part Number Index

Hitch A-Frame S/N 584254-

Applies to RCR2584, RCR2684

14031

22 RCR2560, RCR2572, RCR2584 & RCR2684 Rotary Cutter 312-459P 02/12/09

Section 2: Decks Land Pride

Table of Contents Part Number Index

Hitch A-Frame S/N 584254-

Applies to RCR2584, RCR2684

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg14031
HHCS 1-8X6 1/2 GR5802-074C1.
REAR BRACE312-685D2.
NUT LOCK 3/4-10 PLT803-026C3.
NUT HEX 1-8 PLT803-031C4.
HHCS 5/8-11X1 1/2 GR5802-051C5.
HHCS 3/4-10X2 GR5802-064C6.
A-FRAME FLAT312-684D7.
PIN, HAIR COTTER 3/16 WIRE DIA805-088C8.
PIVOTINGUPPER HITCH312-699D9.
PIN CLEVIS 1 X 3 3/16 LG805-090C10.
TUBE 1 5/16 OD X 3 1/8 LG.312-694D11.
WASHER LOCK SPRING 1 PLT804-027C12.
NUT LOCK 5/8-11 PLT803-024C13.

(S/N 317416+)DRIVELINE HOOK HANGER W/HRDWR800-320C14.

(S/N 538584+)HHCS 1/4-20X1 GR5802-005C15.

(S/N 538584+)MANUAL STORAGE CONTAINER816-504C16.

(S/N 538584+)WASHER FLAT 1/4 SAE PLT804-007C17.

(S/N 538584+)NUT HEX NYLOCK 1/4-20803-255C18.

02/12/09 RCR2560, RCR2572, RCR2584 & RCR2684 Rotary Cutter 312-459P 23

Land Pride Section 2: Decks

Table of Contents Part Number Index

Hydraulic Lift

Applies to RCR2584, RCR2684

14037

24 RCR2560, RCR2572, RCR2584 & RCR2684 Rotary Cutter 312-459P 02/12/09

Section 2: Decks Land Pride

Table of Contents Part Number Index

Hydraulic Lift

Applies to RCR2584, RCR2684

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg14037
STROKE CONTROL SPACERS 1 1/8810-242C1.
HH3/8R1 178 3/4FJIC 9/16FJIC811-542C2.
AD 9/16MORB 9/16MJIC811-170C3.
PIN, HAIR COTTER 3/16 WIRE DIA805-088C4.
PIN CLEVIS 1 X 2 3/4 USABLE LG805-004C5.
CYL 2.5X8X1.12 ROD (TIE)1 PIN810-200C6.
HHCS 3/4-10X1 1/2 GR5802-184C7.
HHCS 3/8-16X1 1/2 GR5802-022C8.
HOSE HOLDER BRACKET312-729D9.
NUT LOCK 3/4-10 PLT803-026C10.
WASHER FLAT 3/8 SAE PLT804-012C11.
NUT LOCK 3/8-16 PLT803-013C12.
SPRING HOSE LOOP807-023C13.
RATCHET JACK - HEAVYDUT890-177C14.
VENT PLUG - 9/16-18 PLATED800-117C15.

02/12/09 RCR2560, RCR2572, RCR2584 & RCR2684 Rotary Cutter 312-459P 25

Land Pride Section 2: Decks

Table of Contents Part Number Index

Rear Axle

Applies to RCR2584, RCR2684

14034

26 RCR2560, RCR2572, RCR2584 & RCR2684 Rotary Cutter 312-459P 02/12/09

Section 2: Decks Land Pride

Table of Contents Part Number Index

Rear Axle

Applies to RCR2584, RCR2684

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg14034
RCR2584 AXLE WELDMENT312-427H1.
WHEEL 15 X 5 X 4 BOLT814-066C2.
BOLT WHEEL 1/2-20X1 90-DEG802-104C3.
TIRE & WHEEL LAMINATED 6.0 X 9814-059C4.
WASHER FLAT 1/2 SAE PLT804-016C5.
WASHER LOCK SPRING 1/2 PLT804-015C6.

Rev. 2(S/N 336501+)HHCS 1/2-20X1 1/4 GR5802-326C7.

Rev 1; Use up stock(S/N 336500-)HHCS 1/2-20X1 GR5802-240C7.
HUB GREASE CAP200-001D8.
NUT HEX SLOTTED 7/8-14 PLT803-029C9.
PIN COTTER 3/16 X 1 1/4 PLT805-016C10.
WASHER SPINDLE - 7/8804-055C11.
BEARING CONE 15123822-091C12.
BEARING CUP 15245822-092C13.

Rev. 2Sold with cups & zerk. Refer to #16HUB 4 BOLT815-091C14.

Rev 1; Use up stock4 BOLT HUB312-106D14.
GREASE ZERK STRAIGHT 1/4-28800-001C15.

Rev. 2HUB 4 BOLTWHL W/CUPS & ZERK815-093C16.

Rev 1; Use up stock4 BLT WHL HUB W/CUPS&ZERK ASSY312-151S16.
SEAL 1 3/8 ID X 2.441 OD X.313816-098C17.
NUT LOCK 3/4-10 PLT803-026C18.
WASHER FLAT 3/4 SAE PLT804-025C19.
HHCS 3/4-10X2 1/4 GR5802-065C20.
TUBE 1 OD X 12 GA X 15/16 LG.312-712D21.
PIN COTTER 5/32 X 1 1/4 LG805-045C22.
PIN CLEVIS 1 X 2 1/4 GR5 PLT805-187C23.
FLAT SPRING SUPPORT312-720D24.
TUBE 1.25 OD X .28WL X1.09 LG.312-735D25.
LUG SPRING CUSHION WELDMENT312-424H26.
PIN, HAIR COTTER 3/16 WIRE DIA805-088C27.
PIN CLEVIS 3/4 X 1 1/2805-083C28.
LEVEL ROD SHORT WELDMENT312-428H29.
SPRING COMP 1.88OD x .362W807-143C30.
NUT HEX COUPLER 3/4-10 X 5 PLT803-237C31.
NUT HEX JAM 3/4-10 PLT803-048C32.
LEVEL ROD LONG WELDMENT312-429H33.
NUT LOCK 5/8-11 PLT803-024C34.
SPRING MOUNT BOTTOM LH. WLDMT.312-426H35.
SPRING MOUNT BOTTOM RH. WLDMT.312-425H36.
HHCS 5/8-11X3 1/2 GR5802-162C37.
TIRE 25.5 X 8.0-14 - MOUNTED814-086C38.

02/12/09 RCR2560, RCR2572, RCR2584 & RCR2684 Rotary Cutter 312-459P 27

Land Pride Section 2: Decks

Table of Contents Part Number Index

Tailwheel

Applies to RCR2560, RCR2572

13450

28 RCR2560, RCR2572, RCR2584 & RCR2684 Rotary Cutter 312-459P 02/12/09

Section 2: Decks Land Pride

Table of Contents Part Number Index

Tailwheel

Applies to RCR2560, RCR2572

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg13450

Rev. 2WASHER MACH 2.25 X 1.50 X 14GA804-066C1.

Rev 1; Use up stockWASHER MACH 2.25 X 1.50 X 10GA804-063C1.
GREASE ZERK 1/4-28 THD FORMING800-080C2.

RCR2572 (Shown)ARM WELDMENT312-387H3.
RCR2560ARM WELDMENT312-403H3.

Rev. 2RHSNB 1/2-13X1 1/2 GR5802-106C4.

Rev 1; Use up stockRHSNB 1/2-13X1 1/4 GR5802-214C4.

Wentto square holes (S/N 243129+)TAILWHEEL ARM ADJUST PLATE312-616D5.
WASHER FLAT 1/2 SAE PLT804-016C6.
TAILWHEEL VERT SUPPORT LH312-614D7.
TAILWHEEL VERT SUPPORT RH312-615D8.
HHCS 1/2-13X3 3/4 GR5802-042C9.
SPACER TUBE 3/4 OD X 2 1/32312-629D10.
NUT LOCK 1/2-13 PLT803-019C11.

(S/N 209101+)PIN ROLL 3/8 X 2 1/2 PLT805-255C12.

(S/N 209100-)PIN SPIRAL 3/8X2 1/2 PLAIN805-043C12.

Rev. 2RC25 TAILWHEELYOKE890-583C13.

Rev 1; Use up stockRC25 YOKEWELDMENT312-077H13.
HHCS 3/4-10X7 1/2 GR5802-280C14.
NUT HEX 3/4-10 PLT803-027C15.
WASHER LOCK SPRING 3/4 PLT804-023C16.

Rev. 2NUT HEX 1 1/4-7(MACHINED)PLAIN803-289C17.

Rev 1; Use up stockTW SHOULDER NUT312-124D17.
OIL SEAL DOUBLE LIP816-009C18.
BEARING CONE 15123822-091C19.
BEARING CUP 15245822-092C20.

Rev. 2(S/N 336501+)HHCS 1/2-20X1 1/4 GR5802-326C21.

Rev 1; Use up stock(S/N 336500-)HHCS 1/2-20X1 GR5802-240C21.
WASHER LOCK SPRING 1/2 PLT804-015C22.
WASHER FLAT 1/2 SAE PLT804-016C23.
TIRE & WHEEL LAMINATED 4.0 X 8814-058C24.

Rev. 2HUB 4 BOLTWHL W/CUPS & ZERK815-093C25.

Rev 1; Use up stock4 BOLT HUB312-106D25.
GREASE ZERK STRAIGHT 1/4-28800-001C26.

Rev. 2BUSHING TW 1.25ODX.78IDX5 1/4827-036C27.

Rev 1; Use up stockTW SPINDLE TUBE312-123D27.
LAM 4 X 8 TIRE-WHEEL-HUB814-162C28.

and 32 two of items 19 through 22
and four of items 23; 24 and 25

(S/N 243129+)RHSNB 1/2-13X1 1/2 GR5802-106C29.

DECAL NOTICE - 20 MPH MAX818-681C30.
LAM 4X8 TR-WL-HUB-YOKE 25 SER.814-161C31.

Rev. 2Includes one of items 26 through 29

Rev 1; Use up stockRC25 & 35 TW ASSY - 15312-131K28.

Rev. 2(S/N 243128-)HHCS 1/2-13X1 1/2 GR5802-091C29.

Rev 1; Use up stockHHCS 1/2-13X1 1/4 GR5802-034C29.

02/12/09 RCR2560, RCR2572, RCR2584 & RCR2684 Rotary Cutter 312-459P 29