Land Pride HD25, HD35 User Manual
Specifications & Capacities
Post Hole Diggers
HD25 and HD35 Hydraulic Series
HD25
(3-Point)
Hydraulic Hoses
Maximum Auger RPM
Gallons Per Minute Rating
Max torque @ 2500 PSI
Weight with 6” Auger
Auger Length
Auger Flighting Thickness
Auger Pipe
Auger Teeth
Standard Optional Standard Optional
109 RPM 105 RPM 109 RPM 105 RPM
5 -12 GPM @ 1500 to 3000 PSI 10 -25 GPM @ 1500 to 3000 PSI
700 ft. lbs. 1605 ft. lbs.
235 lbs. 185 lbs. 235 lbs. 189 lbs.
50 Degree Angle Installed on Angled Side
Number of Teeth
Pilot Cast steel, 3 drill points
Auger Drive
Gearbox
Output Shaft on Gearbox
Hitch
Yoke
Boom
(6” - 2 teeth) (9” & 12” - 4 teeth) (15” - 5 teeth) (18” - 6 teeth) (24” - 8 teeth)
Cat I or II Bucket Mount Cat I or II Bucket Mount
2 7/8” Tubing Not Applicable 2 7/8” Tubing Not Applicable
Reinforced Tubing Not Applicable Reinforced Tubing Not Applicable
HD25
(Bucket Mount)
(3- Point)
48”
1/4”
2 1/2” dia.
Forged, Individually Replaceable
40 Degree Angle Installed on Flat Side
Hydraulic
3.18:1 Ratio
2” O.D. Round
HD35
HD35
(Bucket Mount)
Auger Sizes
Hydraulic Hoses
Hydraulic
Down Pressure Kit
Storage Stand
Auger Extensions
Options and Accessories
6”, 9”, 12”, 15”, 18” or 24”
Not Applicable (2)-24 ft. long hoses Not Applicable (2)-24 ft. long hoses
Available NotApplicable Available NotApplicable
Available NotApplicable Available NotApplicable
7” and 14” Extensions Available
Designs, specifications, features and information are subject to change without notice.
52
317-076S continued on next page
2/03/09
Specifications & Capacities
Post Hole Diggers
33 1/4”
Auger
Dia.
6”, 9”, 12”,
15”, 18” & 24”
89 1/4”
79 1/4”
67 5/8”
Auger
Dia.
6”, 9”, 12”,
15”, 18” & 24”
HD25 = 21”
HD35 = 21 3/8”
67 1/8”
27527
3-Point Mount Post Hole Digger
Designs, specifications, features and information are subject to change without notice.
53
Bucket Mount
Post Hole Digger
317-076S end
26779
2/03/09
Loading...