Land Pride DH1048, DH1060, DH2572, DH2596, DH1560 Operator's Manual
...
Table of Contents
Disc Harrows
DH1048, DH1060, DH1560, DH1572, DH1590, DH2572 & DH2596
17800
322-013M
Operator’s Manual
Read the Operator’s Manual entirely. When you see this symbol,
the subsequent instructions and warnings are serious - follow
!
without exception. Your life and the lives of others depend on it!
Cover photo may show optional equipment not supplied
with standard unit.
For an Operator’s Manual and Decal Kit in French or
Spanish Language, please see your Land Pride dealer.
Printed 12/7/18
Machine Identification
Record your machine details in the log below. If you replace this manual, be sure to transfer this information to the new
manual.
If you, or the dealer, have added Options not originally ordered with the machine, or removed Options that were
originally ordered, the weights and measurements are no longer accurate for your machine. Update the record by
adding the machine weight and measurements provided in the Specifications & Capacities Section of this manual with
the Option(s) weight and measurements.
Model Number
Serial Number
Machine Height
Machine Length
Machine Width
Machine Weight
Delivery Date
First Operation
Accessories
Dealer Contact Information
Name:
Street:
City/State:
Telephone:
Email:
!
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov
California Proposition 65
12/7/18DH1048, DH1060, DH1560, DH1572, DH1590, DH2572 & DH2596 Disc Harrows 322-013M
Table of Contents
Table of Contents
Important Safety Information . . . . . . . . . . . . . 1
Safety at All Times . . . . . . . . . . . . . . . . . . . . . . . . . 1
Look for the Safety Alert Symbol . . . . . . . . . . . . . . . 1
Safety Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Using This Manual . . . . . . . . . . . . . . . . . . . . . . . . . 6
Owner Assistance . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Section 1: Assembly & Set-Up . . . . . . . . . . . . 8
Tractor Requirements . . . . . . . . . . . . . . . . . . . . . . . 8
Torque Requirements . . . . . . . . . . . . . . . . . . . . . . . 8
Dealer Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
DH10 & DH15 Series . . . . . . . . . . . . . . . . . . . . . . 8
DH25 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Optional Equipment . . . . . . . . . . . . . . . . . . . . . . . . 10
Scrapers
DH15 & DH25 Series Only . . . . . . . . . . . . . . . . . 10
Center Sweep
DH15 & DH25 Series Only . . . . . . . . . . . . . . . . . 10
Tractor Hook-Up . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Section 2: Operating Instructions . . . . . . . . . 12
Operator’s Responsibilities . . . . . . . . . . . . . . . . . . 12
Transporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Field Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
General Operating Instructions . . . . . . . . . . . . . . . 13
Section 3: Adjustments . . . . . . . . . . . . . . . . . 14
Disc Angling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Disc Gang Lateral Adjustment . . . . . . . . . . . . . . . . 15
Front Disc Gangs on DH10 Series . . . . . . . . . . . 15
Front Disc Gangs on DH15 Series . . . . . . . . . . . 15
Front Disc Gangs on DH25 Series . . . . . . . . . . . 15
Rear Disc Gangs on DH10 Series . . . . . . . . . . . 15
Rear Disc Gangs on DH15 Series . . . . . . . . . . . 15
Rear Disc Gangs on DH25 Series . . . . . . . . . . . 15
Disc Leveling Front To Rear . . . . . . . . . . . . . . . 15
Disc Blade Replacement . . . . . . . . . . . . . . . . . . . . 15
Section 4: Accessories . . . . . . . . . . . . . . . . . 16
Electric Spin Spreader . . . . . . . . . . . . . . . . . . . . 16
Drag Harrow . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Seed Bed Roller . . . . . . . . . . . . . . . . . . . . . . . . . 16
Complete One Pass Seeding Application . . . . . . 17
Section 5: Maintenance . . . . . . . . . . . . . . . . . 18
General Maintenance Information . . . . . . . . . . . . . 18
Daily Operational Checks . . . . . . . . . . . . . . . . . . . 18
Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Long-Term Storage . . . . . . . . . . . . . . . . . . . . . . . . 18
Section 6: Specifications & Capacities . . . . . 19
Section 7: Features & Benefits . . . . . . . . . . . 22
Section 8: Troubleshooting . . . . . . . . . . . . . . 24
Section 9: Torque Values Chart . . . . . . . . . . . 26
Section 10: Warranty . . . . . . . . . . . . . . . . . . . 27
12/7/18
© Copyright 2018 All rights Reserved
Land Pride provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the
preparation of this manual, Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use
of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this
product at the time of its publication, and may not reflect the product in the future.
Land Pride is a registered trademark.
All other brands and product names are trademarks or registered trademarks of their respective holders.
Printed in the United States of America.
DH1048, DH1060, DH1560, DH1572, DH1590, DH2572 & DH2596 Disc Harrows 322-013M
See previous page for Table of contents.
Manual QR Locator
The QR (Quick Reference) codes on the cover and below will take you to the
Parts Manual. Download the appropriate App on your camera phone, open the
App, point your phone on the QR code, and take a picture.
DH15 & DH25
DH10 Series
Series
Dealer QR Locator
The QR code below will link you
to available dealers for Land Pride
products.
12/7/18
Important Safety Information
Important Safety Information
Listed below are common practices that may or may not be applicable to the products
described in this manual.
Safety at All Times
Careful operation is your best
assurance against an accident.
All operators, no matter how much
experience they may have, should
carefully read this manual and
other related manuals, or have the
manuals read to them, before
operating the power machine and
this implement.
Thoroughly read and understand
the “Safety Label” section. Read
all instructions noted on them.
Do not operate the equipment
while under the influence of drugs
or alcohol as they impair the ability
to safely and properly operate the
equipment.
The operator should be familiar
with all functions of the tractor and
attached implement and be able to
handle emergencies quickly.
Make sure all guards and shields
appropriate for the operation are in
place and secured before
operating implement.
Keep all bystanders away from
equipment and work area.
Start tractor from the driver’s seat
with hydraulic controls in neutral.
Operate tractor and controls from
the driver’s seat only.
Never dismount from a moving
tractor or leave tractor unattended
with engine running.
Do not allow anyone to stand
between tractor and implement
while backing up to implement.
Keep hands, feet, and clothing
away from power-driven parts.
While transporting and operating
equipment, watch out for objects
overhead and along side such as
fences, trees, buildings, wires, etc.
Do not turn tractor so tight as to
cause hitched implement to ride
up on the tractor’s rear wheel.
Store implement in an area where
children normally do not play.
When needed, secure attachment
against falling with support blocks.
Look for the Safety Alert Symbol
The SAFETY ALERT SYMBOL indicates there is a
potential hazard to personal safety involved and extra
safety precaution must be taken. When you see this
!
Be Aware of
Signal Words
A signal word designates a degree or
level of hazard seriousness. The
signal words are:
!
DANGER
Indicates a hazardous situation that, if
not avoided, will result in death or
serious injury.
Safety Precautions for
Children
Tragedy can occur if the operator
is not alert to the presence of
children. Children generally are
attracted to implements and their
work.
Never assume children will remain
where you last saw them.
Keep children out of the work area
and under the watchful eye of a
responsible adult.
Be alert and shut the implement
and tractor down if children enter
the work area.
Never carry children on the tractor
or implement. There is not a safe
place for them to ride. They may
fall off and be run over or interfere
with the control of the power
machine.
Never allow children to operate the
power machine, even under adult
supervision.
Never allow children to play on the
power machine or implement.
Use extra caution when backing
up. Before the tractor starts to
move, look down and behind to
make sure the area is clear.
symbol, be alert and carefully read the message that
follows it. In addition to design and configuration of
equipment, hazard control, and accident prevention are
dependent upon the awareness, concern, prudence, and
proper training of personnel involved in the operation,
transport, maintenance, and storage of equipment.
!
WARNING
Indicates a hazardous situation that, if
not avoided, could result in death or
serious injury.
!
CAUTION
Indicates a hazardous situation that, if
not avoided, may result in minor or
moderate injury.
Tractor Shutdown & Storage
If engaged, disengage power
take-off.
Park on solid, level ground and
lower implement to ground or onto
support blocks.
Put tractor in park or set park
brake, turn off engine, and remove
switch key to prevent unauthorized
starting.
Relieve all hydraulic pressure to
auxiliary hydraulic lines.
Wait for all components to stop
before leaving operator’s seat.
Use steps, grab-handles and
anti-slip surfaces when stepping
on and off the tractor.
Detach and store implement in an
area where children normally do
not play. Secure implement using
blocks and supports.
OFF
REMOVE
12/7/18
1
Important Safety Information
Listed below are common practices that may or may not be applicable to the products
described in this manual.
Tire Safety
Tire changing can be dangerous
and must be performed by
trained personnel using the
correct tools and equipment.
Always maintain correct tire
pressure. Do not inflate tires
above recommended pressures
shown in the Operator’s Manual.
When inflating tires, use a clip-on
chuck and extension hose long
enough to allow you to stand to
one side and NOT in front of or
over the tire assembly. Use a
safety cage if available.
Securely support the implement
when changing a wheel.
When removing and installing
wheels, use wheel handling
equipment adequate for the
weight involved.
Make sure wheel bolts have been
tightened to the specified torque.
Transport Safely
Comply with federal, state, and
local laws.
Use towing vehicle and trailer of
adequate size and capacity. Secure
equipment towed on a trailer with
tie downs and chains.
Sudden braking can cause a towed
trailer to swerve and upset. Reduce
speed if towed trailer is not
equipped with brakes.
Avoid contact with any overhead
utility lines or electrically charged
conductors.
Always drive with load on end of
loader arms low to the ground.
Always drive straight up and down
steep inclines with heavy end of a
tractor with loader attachment on
the “uphill” side.
Engage park brake when stopped
on an incline.
Maximum transport speed for an
attached equipment is 20 mph. DO
NOT EXCEED. Never travel at a
speed which does not allow
adequate control of steering and
stopping. Some rough terrains
require a slower speed.
As a guideline, use the following
maximum speed weight ratios for
attached equipment:
20 mph when weight of attached
equipment is less than or equal
to the weight of machine towing
the equipment.
10 mph when weight of attached
equipment exceeds weight of
machine towing equipment but
not more than double the weight.
IMPORTANT: Do not tow a load
that is more than double the weight
of the vehicle towing the load.
Use A Safety Chain
A safety chain will help control
drawn machinery should it
separate from the tractor drawbar.
Use a chain with the strength
rating equal to or greater than the
gross weight of the towed
implement.
Attach the chain to the tractor
drawbar support or other specified
anchor location. Allow only
enough slack in the chain to
permit turning.
Always hitch the implement to the
machine towing it. Do not use the
safety chain tow the implement.
Practice Safe Maintenance
Understand procedure before doing
work. Refer to the Operator’s
Manual for additional information.
Work on a level surface in a clean
dry area that is well-lit.
Lower implement to the ground and
follow all shutdown procedures
before leaving the operator’s seat to
perform maintenance.
Do not work under any hydraulic
supported equipment. It can settle,
suddenly leak down, or be lowered
accidentally. If it is necessary to
work under the equipment, securely
support it with stands or suitable
blocking beforehand.
Use properly grounded electrical
outlets and tools.
Use correct tools and equipment for
the job that are in good condition.
Allow equipment to cool before
working on it.
Disconnect battery ground cable (-)
before servicing or adjusting
electrical systems or before welding
on implement.
Inspect all parts. Make certain
parts are in good condition &
installed properly.
Replace parts on this implement
with genuine Land Pride parts only.
Do not alter this implement in a way
which will adversely affect its
performance.
Do not grease or oil implement
while it is in operation.
Remove buildup of grease, oil, or
debris.
Always make sure any material and
waste products from the repair and
maintenance of the implement are
properly collected and disposed.
Remove all tools and unused parts
before operation.
Do not weld or torch on galvanized
metal as it will release toxic fumes.
2
12/7/18
Important Safety Information
Listed below are common practices that may or may not be applicable to the products
described in this manual.
Prepare for Emergencies
Be prepared if a fire starts.
Keep a first aid kit and fire
extinguisher handy.
Keep emergency numbers for
doctor, ambulance, hospital, and
fire department near phone.
911
Use Safety
Lights and Devices
Slow moving tractors, skid steers,
self-propelled machines, and towed
equipment can create a hazard
when driven on public roads. They
are difficult to see, especially at
night. Use the Slow Moving Vehicle
sign (SMV) when on public roads.
Flashing warning lights and turn
signals are recommended
whenever driving on public roads.
Avoid Underground
Utilities
Dig Safe, Call 811 (USA).
Always contact your local utility
companies (electrical, telephone,
gas, water, sewer, and others)
before digging so that they may
mark the location of any
underground services in the area.
Be sure to ask how close you can
work to the marks they positioned.
Wear Personal Protective
Equipment (PPE)
Wear protective clothing and
equipment appropriate for the job
such as safety shoes, safety
glasses, hard hat, and ear plugs.
Clothing should fit snug without
fringes and pull strings to avoid
entanglement with moving parts.
Prolonged exposure to loud noise
can cause hearing impairment or
hearing loss. Wear suitable
hearing protection such as
earmuffs or earplugs.
Operating equipment safely
requires the operator’s full
attention. Avoid wearing
headphones while operating
equipment.
Use Seat Belt and ROPS
Land Pride recommends the use
of a CAB or roll-over-protectivestructures (ROPS) and seat belt
in almost all power machines.
Combination of a CAB or ROPS
and seat belt will reduce the risk
of serious injury or death if the
power machine should be upset.
If ROPS is in the locked-up
position, fasten seat belt snugly
and securely to help protect
against serious injury or death
from falling and machine overturn.
Avoid High
Pressure Fluids Hazard
Escaping fluid under pressure can
penetrate the skin causing serious
injury.
Before disconnecting hydraulic
lines or performing work on the
hydraulic system, be sure to
release all residual pressure.
Make sure all hydraulic fluid
connections are tight and all
hydraulic hoses and lines are in
good condition before applying
pressure to the system.
Use a piece of paper or
cardboard, NOT BODY PARTS, to
check for suspected leaks.
Wear protective gloves and safety
glasses or goggles when working
with hydraulic systems.
DO NOT DELAY. If an accident
occurs, see a doctor familiar with
this type of injury immediately. Any
fluid injected into the skin or eyes
must be treated within
a few hours or
gangrene may
result.
Keep Riders Off
Machinery
Never carry riders on tractor or
implement.
Riders obstruct operator’s view
and interfere with the control of
the power machine.
Riders can be struck by objects or
thrown from the equipment.
Never use tractor or implement to
lift or transport riders.
12/7/18
3
Table of Contents
Important Safety Information
Important Safety Information
Safety Labels
Your Disc Harrow comes equipped with all safety labels in
place. They were designed to help you safely operate your
equipment. Read and follow their directions.
1. Keep all safety labels clean and legible.
2. Refer to this section for proper label placement. Replace
all damaged or missing labels. Order new labels from your
nearest Land Pride dealer. To find your nearest dealer,
visit our dealer locator at www.landpride.com.
3. Some new equipment installed during repair requires
safety labels to be affixed to the replaced component as
specified by Land Pride. When ordering new components
make sure the correct safety labels are included in the
request.
4. Refer to this section for proper label placement. To install
new labels:
a. Clean surface area where label is to be placed.
b. Spray soapy water onto the cleaned area.
c. Peel backing from label and press label firmly onto the
surface.
d. Squeeze out air bubbles with edge of a credit card or
with a similar type of straight edge.
DH10 Series
DH15 & DH25 Series
23755
23753
17800
818-719C
Caution General
4
DH1048, DH1060, DH1560, DH1572, DH1590, DH2572 & DH2596 Disc Harrows 322-013M 12/7/18
Important Safety Information
Table of Contents
838-614C
2" x 9" Red Reflector (2 places on DH1590 & DH2596)
858-095C
17801
2" x 4 1/2" Red Reflector (2 places on DH1048, DH1060,
DH1560, DH1572, & DH2572)
23753
DH10 & DH15 Series
25847
Warning Decals on end of Disc Gangs are for Set-up Only.
Location may vary from gang to gang.
The customer is not required to maintain them once worn off.
DH25 Series
DH1048, DH1060, DH1560, DH1572, DH1590, DH2572 & DH2596 Disc Harrows 322-013M12/7/18
838-093C
Warning Sharp Object
5
Table of Contents
Introduction
Introduction
Land Pride welcomes you to the growing family of new
product owners. This Disc Harrow has been designed
with care and built by skilled workers using quality
materials. Proper assembly, maintenance, and safe
operating practices will help you get years of satisfactory
use from this machine.
Application
The DH10 Series Economy Disc Harrows are designed
to open up and break up the soil surface and to prepare
the soil for seedbed or planting preparation. The DH10
Series Discs are adapted for Category 1 three-point hitch
mounting on tractors in the 20-40 horsepower range, and
are Quick Hitch adaptable. The forward gang has
aggressive notched discs while the rear gang has a
choice of notched or smooth discs to quickly break up
and evenly redistribute the finely cultivated topsoil. The
DH10 Series Land Pride Discs have applications in
homeowner landscaping, smaller nurseries, gardens,
smaller hobby farms, wild game food plots, and medium
duty residential use. The 48" Disc Harrow features 16"
disks, while the 60" offers 16" or 18".
The DH15 Series Disc Harrows are designed to
breakup and redistribute the soil surface in preparation of
seedbeds for planting operations. The DH15 Series
Discs are adapted for Category 1 three-point hitch on
tractors in the 25-65 horsepower range, and are Quick
Hitch adaptable. Disc gangs can be ordered with smooth
or notched disc gang arrays for lighter or more
aggressive applications based on customer needs. The
DH15 Series Disc Harrows have applications in
commercial landscaping, nurseries, large gardens,
farms, and municipal beautification programs.
The DH25 Series Disc Harrows are designed to
breakup and redistribute the soil surface in preparation of
seedbed and field planting operations. The DH25 Series
Discs are adapted for category 1 and 2 three-point hitch
on tractors in the 35-100 horsepower range, and are
Quick Hitch adaptable. Disc gangs can be ordered with
smooth or notched disc gang arrays for lighter or more
aggressive applications and this series does offer 20"
diameter or larger 22" diameter discs to meet specific
customer needs. The DH25 Series Disc Harrows have
applications in commercial landscaping, construction,
farms, ranches, and municipal maintenance programs.
See “Specifications & Capacities” on page 19 and
“Features & Benefits” on page 22 for additional
information and performance enhancing options.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
the operator with safety, assembly, operation,
adjustments, troubleshooting, and maintenance. Read
this manual and follow the recommendations to help
ensure safe and efficient operation.
• The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
• To order a new Operator’s or Parts Manual, contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge, from our website at
www.landpride.com
Terminology
“Right” or “Left” as used in this manual is determined by
facing forward in the direction the machine will operate
while in use unless otherwise stated.
Definitions
IMPORTANT: A special point of information related
to the following topic. Land Pride’s intention is this
information must be read & noted before continuing.
NOTE: A special point of information that the
operator should be aware of before continuing.
Owner Assistance
The dealer should complete the Online Warranty
Registration at the time of purchase. This information is
necessary to provide you with quality customer service.
The parts on your Disc Harrow have been specially
designed by Land Pride and should only be replaced with
genuine Land Pride parts. Contact a Land Pride dealer if
customer service or repair parts are required. Your Land
Pride dealer has trained personnel, repair parts, and
equipment needed to service the implement.
6
DH1048, DH1060, DH1560, DH1572, DH1590, DH2572 & DH2596 Disc Harrows 322-013M 12/7/18
Loading...