Land Pride AFM4522 User Manual

Specifications & Capacities
All Flex Mowers

Model AFM4522 All-Flex Grooming Mower

Description Specification / Capacity Description Specification / Capacity

Discharge Type Rear
Cutting Width 21’-9” Blade Drive Belt 1 C-Section
Overall Width 22’ -0” Drive Belt Tension Spring Loaded Idler with Overcenter

Release

Transport Height 11’-2” Blade Bearing Sealed Ball Bearings
Transport Width 9’-6” With Lock bar Installed Blades

3 Each Per Deck

Overall Length 18’-6” Mowing Position

15’-2” Transport Position

Machine Weight 4,150 lbs. Blade Spindle Speed 2,241 R.P.M.
Tractor Horsepower Minimum 65 HP / Maximum 100 HP Blade Tip Speed 18,498 F.P.M.
Hitch Pull Type with Adjustable Clevis and

Safety Tow Chain

Tongue Support 2,200 lb. Capacity Screw Jack Deck Wheel Spindles 1 1/4” w/Nylon Bushings
Gearbox Support 1/4” Steel Channel Transport Tires 2 each, P27560SR
Gearboxes 540 RPM (1)-Splitter & (3)-Wing Transport Locks Automatic with Pull Rope Release
Gearbox Oil Capacity Splitter: 2.5 pints

Wings: 3.5 pints

Main Driveline (1) Category lV with Constant Velocity Center Deck Flex 10 Degrees Left To Right

Deck Drivelines (3) Categor y III with Slip Clutch Hydraulic Outlets 1 Set Required
Cutting Height 3/4" to 5 1/4" (In 1/4” increments) Deck Cylinders Dual Acting
Deck Size & Quantity 3 each @ 90” Gauge Wheel Arms 1/4” Wall Square Tubing
Deck Overlap 4 1/2” Turning Radius Zero Tur ning Radius
Deck Thickness 3/16” Mowing Capacity

Anti-Scalp Roller Front Center of Each Deck

Blade Overlap 2 1/4"

Deck Tires 18 x 9.5 Air Tire, Sealant

Wing Flex 23 Degrees Left To Right

@ 2 mph
@4 mph
@ 6 mph

Low Lift (5/16" x 2 1/2" x 31 17/32")
Optional Blades:
Medium Lift, High Lift & Mulching

22 Degrees Front To Back

22 Degrees Front To Back

5.27 Acres Per Hour

10.54 Acres Per Hour

15.82 Acres Per Hour

AFM4522 Specification Drawing

Designs, specifications, features and information are subject to change without notice.

13

315-360S continued on next page

11/14/08

Specifications & Capacities
All Flex Mowers

AFM4522 Specification Drawing

Designs, specifications, features and information are subject to change without notice.

14

315-360S End

22379

11/14/08